pdasterly
- 329
- 43
looking for a way to keep my rez full without having to buy a ro system?
i understand how to use float valve, i have a ro1000 system but i need to fill a rez in another location without the ro
If you know how to use floats...then that's how you do it. Auto shutoffs and/or pressure regulators or you will end up with 200 gals of water on the floor at some point. I mean I don't get what you are asking. Use a water source not connected to the RO and a float valve. All the supporting stuff is going to depend on on the line size and the type and qual of valve you use.
If you are trying to fill the rez wth nuted water from a different rez then use the electric float valves they make to retrofit sump pumps and a pump. It will have a piggyback 120v plug that sits between the socket and the plug to the pump and turn it on and off. They sell them at the big box hardware stores for like 20-30 bucks.
faucet to rez, the auto shut-off valves i see are made for ro systems (4 ports on valve)
yes but i dont know the psi at that outlet, my ro1000 gauge says 40 psi but that location is directly off the incoming main line.did you have it running full blast? says it needs a min of 40 psi
yes but i dont know the psi at that outlet, my ro1000 gauge says 40 psi but that location is directly off the incoming main line.
if i cant figure, ill just get a small boy from hydrologicHmm might not be high enough. If it has an aerator try removing that if you can and still hook the line up. Just brain storming.
answer from amazonHmm might not be high enough. If it has an aerator try removing that if you can and still hook the line up. Just brain storming.