leannaepulido
- 5
- 3
What is the source material? How was it concentrated - like Short Path or Eth extraction or a press?my method has been:
when i stir the concentrate with the needle after decarbing i get bubbles before the thinner, i also get bubbles when i stir in the pyur thinner. after about 5 min of stirring there are less bubbles but still noticeable so after i put it in the cart i will let it sit over night. in the morning most of the bubbles are gone.
- decarb concentrate @ 225f for 3-4 hours
- take out use 3-6 drops of pyur thinner
- use needle to mix for 5-10 min until it cools down
- if consistency is ok after it cools down put it back in oven for 5 min or so to melt it
- use syringe to get oil into cart
my questions are,
am i getting bubbles because i need to decarb longer or is it normal to have some bubbles? im currently going for about 4 hours
will i melt the thc away or evaporate it if i leave the the concentrate in the oven too long?
how hot does it have to be before it starts melting/evaporating thc away?
i put the glass container in a brownie pan and after i take it out of the oven there is oil on the pan, is that thc being evaporated?
i just want to make sure i don't leave it in there too long or that im not wasting too much of the concentrate..
long post but any help is appreciated!
So you are looking for a recipe for putting pressed rosin in a cart? Do you have the cart hardware already?I seen this thread and thought cool someone’s gonna post a recipe- nope! Lol
I should have known @Moe.Red has all the info! Lol since I started growin I hate to smoke or eat anything I didn’t grow ! Lol
if ya have a good process I’d love to read it. I’m not a full on organic is believer but. Try and keep it simple and natural extract as I can I prefer to press my flower into concentrate - I’m also learning to love dry sift.
Sounds like she is buying .5 to 1ml extract made with whatever process and loaded into tiny syringes, running a decarb cycle and then thinning it out to the consistency she needs.So you are looking for a recipe for putting pressed rosin in a cart? Do you have the cart hardware already?
Biggest problem is the amount of waxes when pressing tends to not flow so you gotta thin it out. Also some carts don’t do a good job of decarb so the whole process is important
That was for Mosh. Hoping OP comes back on her questionsSounds like she is buying .5 to 1ml extract made with whatever process and loaded into tiny syringes, running a decarb cycle and then thinning it out to the consistency she needs.
-Eskander
I do have everything except the knowledge to even start - decarb I’ve experimented with so I got an idea - but the thinning agent? And consistency needed well that’s another story if I just had a trustworthy place to start. I’m sure experience is the keySo you are looking for a recipe for putting pressed rosin in a cart? Do you have the cart hardware already?
Biggest problem is the amount of waxes when pressing tends to not flow so you gotta thin it out. Also some carts don’t do a good job of decarb so the whole process is important
I understand but that’s a pretty generic process I’m looking for names and numbers temps times etc.Sounds like she is buying .5 to 1ml extract made with whatever process and loaded into tiny syringes, running a decarb cycle and then thinning it out to the consistency she needs.
-Eskander
Not on my pc or I could give you a link but there are many companies that sell thinners. I use True Terpenes. If you have everything else ready dropping thinner over the wax and stirring is the easy part.I do have everything except the knowledge to even start - decarb I’ve experimented with so I got an idea - but the thinning agent? And consistency needed well that’s another story if I just had a trustworthy place to start. I’m sure experience is the key
I’ll be doing a run this weekend. I’ll hit you back with pics of the whole process from press to full cart.I understand but that’s a pretty generic process I’m looking for names and numbers temps times etc.
sorry op for high jacking your thread
Kool thanks sounds to easy ! LolI’ll be doing a run this weekend. I’ll hit you back with pics of the whole process from press to full cart.
Visions of TLC comparisons flash in my head and I'm betting Moe wants Santa to bring him a triple quad MS...Kool thanks sounds to easy ! Lol
Short path will be decarboxylated already.short path.
Agreed.Short path will be decarboxylated already.
-Eskander
How long ago was that? Which product did you use?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?