Graywolf
- 1,597
- 263
Been eying these for a minute, the 9K price tag is a lil prohibitive tho
Gray Wolf I followed you when I was an ICMAG sheep, and I love your Site, and the holy anointing oil, I hope you shared it here as well. I appreciate all the work you do, it changes the way I think about how I put my systems together.
I think collaboration rather than criticism is the key to the ultimate success, what 1971 said about you being wildly wrong was an answer direct from the ego.
I may not like someone but what works works and what I learned from your posts and from the farm is working for us.
Peace
So I'm having a few issues...I am trying to make honeycomb and am using good dehydrated material and am using the AI vacuum oven. However after blowing and scraping into parchment I put into the oven. I have tried 110, 120, and 130 degrees for 12-24 hrs and even more. But I feel the longer I purge the darker it seems to get. After scraping into parchment it looks nice and light and then after purging it's dark and almost shatter or sap like material based on the temp. When I whip it completely into buddar with no vacuum it comes out golden however. Is there a way to get nice honeycomb with the oven without having to whip it all the way? Any ideas on temps/purge techniques? Thanks a lot
If you have the mechanical skills, the cheapest way I've found is to grab a used Napco off E-Bay and replace the heating system and its controls. Pretty much a major rebuild.
How do you get the robin air 5 cdm pump attached to it? I've been noticing almost all the AI ovens have the 3/8" hose built in, and that pump needs a 1/2" intake port. Did you purchase another piece to connect the two or can the hose be replaced?Here is the oven and pump u need to purge with, it makes the best BHO everybody loves it.............GMView attachment 363230 View attachment 363233 View attachment 363234 View attachment 363235 View attachment 363238 View attachment 363239 View attachment 363240 View attachment 363241 View attachment 363242
i meant 5 cfm, stupid autocorrect.Here is the oven and pump u need to purge with, it makes the best BHO everybody loves it.............GMView attachment 363230 View attachment 363233 View attachment 363234 View attachment 363235 View attachment 363238 View attachment 363239 View attachment 363240 View attachment 363241 View attachment 363242
My 3cfm won't even pull a full vac on my 1.9. Gets it to about 25 and almost completely stops. I believe you will need a 7 or better to accurately get it to 29hgCan anyone recommend a good pump for the AI 1.9 cubic foot Vacuum oven? Debating between the standard pump that AI sells 2.5 CFM single phase; or a dual phase Robinarre 15800 8CFM pump. going to be doing alot of large runs
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?