Brand New Grower Trying To Do It Right

  • Thread starter Lebowskii
  • Start date
  • Tagged users None
SinCity

SinCity

899
243
Thanks for the answer. I have moved the temp sensor to a spot under the shaded edge of one of my pots to try to avoid so much direct light. Here is a pic of my set up. Tough to get it all in one shot.

I've been looking around for a solution to my issue and I think I'm going to build a fogger. It seems like an easy cheap, low maintinance solution to low RH. I'm still running hot i think, but if i can pump a stupid amount of moistur in there i can also crank up the exhaust blower.

@1diesel1 and @Rootbound and anyone else! i have a question. do you think such little starts should have that many watts on them right away..? would love to hear your thoughts!
 
Kepp89

Kepp89

287
63
read the previous posts--hopefully he'll set one up
more about starting a grow diary! You'll be amazed at how much guidance these guys are willing to give

i thought the "grow diary" was a thing on the website thats public and as we update the diary it refreshes into "the list" and users can click on them and scroll through their (the growers) progress maybe key in their thoughts and questions about what they see.

but i see. it seems its just a work log with a fancy term ;)
 
SinCity

SinCity

899
243
i thought the "grow diary" was a thing on the website thats public and as we update the diary it refreshes into "the list" and users can click on them and scroll through their (the growers) progress maybe key in their thoughts and questions about what they see.

but i see. it seems its just a work log with a fancy term ;)

no you're absolutely right! apologies. people were trying to convince him to do a diary.
 
SinCity

SinCity

899
243
i thought the "grow diary" was a thing on the website thats public and as we update the diary it refreshes into "the list" and users can click on them and scroll through their (the growers) progress maybe key in their thoughts and questions about what they see.

but i see. it seems its just a work log with a fancy term ;)

your post gave the nudge i needed. fuck it--i'd like to finally start a grow diary. vanity be damned. how exactly do i do that?
 
SinCity

SinCity

899
243
@Kepp89 thanks again. i was hesitant but fuck it. i think i set the diary up correctly...
 
Kepp89

Kepp89

287
63
oh i got no clue man i just have a little book that i write in. i forgot about it after the first 6 days. i just started it back up yesterday

thoughts. predictions. actions. visuals. questions so i remember it later. its all in there now. writing helps to remember, but typing doesn't fwiw.
 
H

Highkev

355
93
70BA112D 164A 416B 80CC 26C2EC67F281
EE611041 D4A1 41B6 AE72 8DBEAE867F41
14C000D4 8547 49D4 968E EC3D1DF3FFB6
@1diesel1 and @Rootbound and anyone else! i have a question. do you think such little starts should have that many watts on them right away..? would love to hear your thoughts!
You need a par meter to test the light intensity.
 
SinCity

SinCity

899
243

And thus begins the learning! This old dog sincerely thanks @Highkev . I've just done a quick lit review of recent research and wow! Now I know what Photosynthetic Active Radiation and Photosynthetic Photon
Flux Density are. This is a new concept for many of my generation. We just measured lumens. Now I understand much more...

Some of my friends have a big thing against LEDs. But I was immediately intrigued by lower electricity draws, less heat, no ballast, and stories about double the yield per watt over old HPS and metal halides. Now I am pretty much convinced the LEDs are the way to go--BUT clearly i need the combination of the different LED diode spectrums. LEDs can get so much closer to the plant, and even we knew that intensity declined the further away from the plant the light is. The new research seems to get closer and closer to true optimization. The ability to dial in so many aspects so specifically with the LED arrays has me fascinated. Can't wait to learn more.
 
Rootbound

Rootbound

Supporter
2,634
263
@1diesel1 and @Rootbound and anyone else! i have a question. do you think such little starts should have that many watts on them right away..? would love to hear your thoughts!
Seems pretty intense and close to me. I keep my QB leds 36 inches away to start out. Not familar with the led light he is using though.
 
L

Lebowskii

10
3
OK info update time.

I'll start with my lil seedlings. In my initial posts I was dealing with getting temp/RH under control with everything in little pots on a table.
20190210 005916
20190210 005939


If you notice, a few of them got pretty goofy lookin. A couple of them were VERY scrawny. Like
20190210 010113
20190210 010121


Then a couple others grew super broad odd shaped leaves.
20190210 010059
 
L

Lebowskii

10
3
[Once I started to see roots reaching out of the bottom of my little pots I transfered to my final 5 gallons. You will notice in the pics that I am missing 1 drip tray...becuase I'm an idiot who cannot count...the last one is in the mail so disregard for now. Two of the seeds germinated extremely late, thus those two not being in the big pots yet. I figure I will not top those two and just allow them to catch up.
20190210 152900


In order to fix my RH issues I built myself a cold vapor system. I ddin't want to get a prebuilt one that I had to refill with water all the time, I want a set and forget.
20190209 172945
20190210 003838
20190211 185055
20190212 153651
View attachment 20190212_155442.mp4 in action
 
20190210 005737
20190210 005805
Last edited:
L

Lebowskii

10
3
This brings me to today.
20190212 155613
20190212 155608


Those plants with the odd shaped leaves are still going at it...being wierd..
20190212 155556


The change from small to large seems to have brought with it a complete reversal in temp issues. I feel like im running cool now. The best I can figure is that the evaporative action from not only the increased surface area of the big pots but the cool vapor system is enough to drop the temp significantly. I have turned down my exhaust blower a to 50% in order to try and retain as much heat as possible but I dont want to go to far and risk a drop in CO2 from fresh air coming in.

This is my status from my most recent check
20190212 155636


The 69.6°F is from the prob situated in the shade next to one of the pots right in the center of the room.
 
1diesel1

1diesel1

Staff
Supporter
11,164
438
@1diesel1 and @Rootbound and anyone else! i have a question. do you think such little starts should have that many watts on them right away..? would love to hear your thoughts!
I use t-5 for veg. Just recently suplimented with l.e.d. I concur with @Rootbound, intense.
 
C93D75D0 E93A 48E7 89DB E631E6537C0B
L

Lebowskii

10
3
You guys think the LED's are too intense for the early plants? I was actually about to get 2 more of them.
 
Top Bottom