Graywolf
- 1,597
- 263
The surface plate that I refer to, is a laboratory hot plate.
The paint pot already had two collars welded in place, and I welded the center pipe in place as a unit.
The tube coming out of the center of the paint pot is a Swage Loc tube, with a Swage Loc compression fitting to attach to the valve and the rest of the stack up. I will simply weld everything next time, so that there are no leaks possible from vibration and use.
I picked up the hose at the local refrigeration supply store. It is a 800psi working pressure, 3000psi burst hose, made of neoprene. The hose that you chose looks adequate.
O-ring unions look like this: http://www.hartindustries.com/order.html
The paint pot already had two collars welded in place, and I welded the center pipe in place as a unit.
The tube coming out of the center of the paint pot is a Swage Loc tube, with a Swage Loc compression fitting to attach to the valve and the rest of the stack up. I will simply weld everything next time, so that there are no leaks possible from vibration and use.
I picked up the hose at the local refrigeration supply store. It is a 800psi working pressure, 3000psi burst hose, made of neoprene. The hose that you chose looks adequate.
O-ring unions look like this: http://www.hartindustries.com/order.html