Badrice
- Posts
- 45
- Reactions
- 32
- Joined
- Oct 15, 2018
- Points
- 18
Sounds good. The single pipe should make for a cleaner setup in my case where space is sort of cramped on that side of the room.
I used regular garden hose on mine.I believe the water chiller uses a 3/4 inch but you would have to check cause sometimes they list ID and OD differently.If a regular garden hose will fit over it than you can use the garden hose repair fitting to work.Awesome stuff! Few questions, mostly noob plumbing stuff.
1. What is the black hosing called and what size do you use? You mentioned 3/4" inch in the videos but wasn't sure by your phrasing.
2. My chiller has threaded 1" female inlet/outlet, what pvc adapter would i use to connect the 3/4" hosing to the chiller? Im guessing it would be a 1" threaded male to 3/4" slip but I dont know if the slip end implies that it goes snug inside a 3/4" hose or if they would be the exact same size and not able to be connected.
Just curious which return pump you are using or recommend, I am just doing a 4-6 site for now, but not sure which brand is better for a external pump.
Thanks.
Just curious which return pump you are using or recommend, I am just doing a 4-6 site for now, but not sure which brand is better for a external pump.
Thanks.
Yeah a 250 is more than enoughJust curious which return pump you are using or recommend, I am just doing a 4-6 site for now, but not sure which brand is better for a external pump.
Thanks.
I used a rubber washer underneath and screwed the plastic underneath.sealed fine.Its all low pressure stuff@heisenbubble Hey quick question, for the top of reservoir did you simply just drill a small hole and screw the plastic fitting into the brass fitting with a washer and it seals fine?
Big pair of channel locks like theseAnother quick question, What did you use to tighten your bulkheads? I ended up going 2". Just curious if I need to grab a strap wrench or if you had something that worked better.
Cement?Pretty much what I snagged from the old Home Depot. My leaks are now a thing of the past. Letting the cement dry out a bit and running it overnight outside where I built it so I can make sure everything is as close to 100% ready when I bring it inside.
Walmart cost me 30 dollars.42 gallon tote from lowes with the black lid and the filter screwed into the side.Which aquarium filter are you using in your res?
I lost my shit over some water on the floor. Did a flush and couldn't get my pump re-primed very easy. Drained nice and easy, refilled just like you do, but the damn pump wouldn't go. Any tips there? My pump is external just like yours. I'm gonna go back down there in a min and clean shit up, but I had to walk away. lol. Running this setup in a 4x4 tent with 6 sites. 1/2hp chiller. 4gallon buckets, 42gallon top off, 55 gallon res to mix r/o and nutes. I need to adjust spacing a bit after this grow. Sites are a little too close to the walls of the tent.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?