Complete Diy Undercurrent Rdwc Instructions

  • Thread starter heisen
  • Start date
  • Tagged users None
sharprock

sharprock

25
3
I think he said he's using 6" net pots. My current system uses 10" net pots designed to fit on 5 gallon pails but the useable resevoir capacity is only 3 gallons. If I switched to the square 4 gallon buckets and 6" net pots would I have more or less resevoir capacity than I do now?
 
H

heisen

2,626
263
I think he said he's using 6" net pots. My current system uses 10" net pots designed to fit on 5 gallon pails but the useable resevoir capacity is only 3 gallons. If I switched to the square 4 gallon buckets and 6" net pots would I have more or less resevoir capacity than I do now?
13 buckets holds about 48 gallons when I'm filled to beneath the net pots.
 
pdasterly

pdasterly

330
43
I think he said he's using 6" net pots. My current system uses 10" net pots designed to fit on 5 gallon pails but the useable resevoir capacity is only 3 gallons. If I switched to the square 4 gallon buckets and 6" net pots would I have more or less resevoir capacity than I do now?
maybe switch to an enlongated tote for your res(wider not taller)
 
H

heisen

2,626
263
I dont see the need for more water unless you are vegging longer.I can use a 1/10 HP chiller on the 12 bucket system and im growing some pretty big plants.Less water means more efficient and less nutrients for changeouts.Im all about Cost vs return and the 4 gallon are perfect.
If i was gonna go bigger i would use the 8 gallon EZ store buckets and veg for 45 days.Put them on 48 inch centers.
 
pdasterly

pdasterly

330
43
Upload 2018 9 29 20 12 29
supplyhouse.com, everything was half price from home depot, $5 shipping(next day)

hard pipe i just went to HDepot. picked up 2 55gal drums of craigslist.

hole saw was most expensive single item
 
Last edited:
Kpc0721

Kpc0721

22
3
Heisendbubble, do you think it’s possible to do this setup using 5gal round buckets? I have a ton of them and net pots that can hold a 6in rockwool cube. Concerned about the bulkheads leaking if it’s on a curved area. Will order the 4 gal buckets and new net pots to mimmick your same set up no problem, just figured I’d see what you thought first about using what I already have. Your setup is killer, best diy rdwc I’ve come across so far!
 
Medigrow

Medigrow

313
63
@heisenbubble : As for the bulkheads hole, I am able to screw them, can't push them though, is that too tight or I need to open the hole a little bit? I'm afraid of a leak if I need to screw the bulkhead.

Thank you :)
 
H

heisen

2,626
263
@heisenbubble : As for the bulkheads hole, I am able to screw them, can't push them though, is that too tight or I need to open the hole a little bit? I'm afraid of a leak if I need to screw the bulkhead.

Thank you :)
You didnt watch the video.make sure you watch these videos all the way through
 
H

heisen

2,626
263
Heisendbubble, do you think it’s possible to do this setup using 5gal round buckets? I have a ton of them and net pots that can hold a 6in rockwool cube. Concerned about the bulkheads leaking if it’s on a curved area. Will order the 4 gal buckets and new net pots to mimmick your same set up no problem, just figured I’d see what you thought first about using what I already have. Your setup is killer, best diy rdwc I’ve come across so far!
You can try to.you may have to use a thicker rubber washer on the outside and it will be something you may have to source your self.
Uniseals may be a better option for you and I personally dont reccomend them.nothing worse than half way through a grow and have water leaking.
It will throw all the ppm numbers out of wack and will be impossible to feed your plants correctly.
It's best to just buy the buckets man.they are really not that much.
 
pdasterly

pdasterly

330
43
bulkheads for flat surface, uniseals for curved, pm me i have a ton of uniseals fo da lo

@heisenbubble : As for the bulkheads hole, I am able to screw them, can't push them though, is that too tight or I need to open the hole a little bit? I'm afraid of a leak if I need to screw the bulkhead.

Thank you :)
 
Kpc0721

Kpc0721

22
3
You can try to.you may have to use a thicker rubber washer on the outside and it will be something you may have to source your self.
Uniseals may be a better option for you and I personally dont reccomend them.nothing worse than half way through a grow and have water leaking.
It will throw all the ppm numbers out of wack and will be impossible to feed your plants correctly.
It's best to just buy the buckets man.they are really not that much.

For sure, I’d rather just make it nice and easy and use your setup that’s already proven so will order buckets! What’s your thoughts on vegging in 6in cubes and putting them in to the buckets on day 1 of flower? This is how I’ve always done it with single buckets and got basketball size roots and 6ft plants still, just do it this way because of space mainly. Just wondering if you think I’m screwing myself doing it that way.
 
H

heisen

2,626
263
For sure, I’d rather just make it nice and easy and use your setup that’s already proven so will order buckets! What’s your thoughts on vegging in 6in cubes and putting them in to the buckets on day 1 of flower? This is how I’ve always done it with single buckets and got basketball size roots and 6ft plants still, just do it this way because of space mainly. Just wondering if you think I’m screwing myself doing it that way.
If that works for you than do it that way but you still need to get the roots through the net pots.
I use totes with 6 inch circles and start my plants in them.faster than cubes.it really accelerates the procrss.
 
Kpc0721

Kpc0721

22
3
If that works for you than do it that way but you still need to get the roots through the net pots.
I use totes with 6 inch circles and start my plants in them.faster than cubes.it really accelerates the procrss.

Most definitely, the roots always blast through like crazy in the first few weeks of flowering so that’s never been an issue. I’ll definitely be making totes like your stuff in the future and will do a side by side too see the difference in veg time.

One last question for now, how are your scrog stands set up? Looks really simple like some metal tubing in a block of wood but it has to be a little more complex than that haha
 
H

heisen

2,626
263
Most definitely, the roots always blast through like crazy in the first few weeks of flowering so that’s never been an issue. I’ll definitely be making totes like your stuff in the future and will do a side by side too see the difference in veg time.

One last question for now, how are your scrog stands set up? Looks really simple like some metal tubing in a block of wood but it has to be a little more complex than that haha
Metal conduit poles and holes drilled through the wood
 
Top Bottom