Council Of First Knowledge, Jedi Temple Training Facility

EventHorizan · Nov 7, 2017

Farmer P said:
Yeah I can get whatever I need for sure. My grow area is odd 33 x 45 x 8 feet high. I'm thinking home depot for one of those troughs for mixing mud and a res like Troph said.

I would spend the money on the 3x3 flood table instead of the trough.\
Now I did the trough way back page 15 to page 75 of this thread.
Made my diy table. It worked but really only for 2 plant in 3 gal fabric.
Now you prob get 4, poss 6 of the 1/2 gal pots.
Tell you what< get that, and diy it for awhile and see what you think.
Then if you really like it you can save up your money for a 3x3 flood table, or a 4x4 table,
or a 3x6 table.......
The idea is for your grow to be selfsubstainable....
:)

Toph420 · Nov 7, 2017

Farmer P said:
Yeah I can get whatever I need for sure. My grow area is odd 33 x 45 x 8 feet high. I'm thinking home depot for one of those troughs for mixing mud and a res like Troph said.

IMO the flood tables are worth the extra money, the way they are designed makes it so 95% of the water actually drains back into the res.. my 3x3 tables were 55$ each

EventHorizan said:
do you ph your cloner?
I had it at 5.9 but its clumb to 6.4..
What do you do?

I don’t ph my cloner, just use 2 gals of RO with 10ml-15ml clonex solution & 2-4ml of orca

A couple of my platinum og clones weren’t doing so great and I believe it’s because there is a spot on the cloner I was missing when I was cleaning it..

EventHorizan · Nov 7, 2017

Farmer P said:
Yeah I can get whatever I need for sure. My grow area is odd 33 x 45 x 8 feet high. I'm thinking home depot for one of those troughs for mixing mud and a res like Troph said.

is that inches are feet, cause thats a big ass grow room if its 33 by 45 foot lol
I would get (2) 2x4 tables instead of the cement mixer.
Its prob just as cheap..

Farmer P · Nov 7, 2017

lol, inches. I wish I had that kind of space. I have that box and a smaller one for veg. I'm only running 3 to four plants at a time.

Toph420 · Nov 7, 2017

Farmer P said:
lol, inches. I wish I had that kind of space. I have that box and a smaller one for veg. I'm only running 3 to four plants at a time.

Damn you could almost do a 2x4 table.. I don’t think I’ve seen a 2x3 table..

EventHorizan · Nov 7, 2017

Farmer P said:
lol, inches. I wish I had that kind of space. I have that box and a smaller one for veg. I'm only running 3 to four plants at a time.

i get them 2 small tables, and run as many 1/2 pots in it I could with all clones from same mother..

Farmer P · Nov 7, 2017

You guys have a good night.

EventHorizan · Nov 7, 2017

Toph420 said:
IMO the flood tables are worth the extra money, the way they are designed makes it so 95% of the water actually drains back into the res.. my 3x3 tables were 55$ each

I don’t ph my cloner, just use 2 gals of RO with 10ml-15ml clonex solution & 2-4ml of orca

A couple of my platinum og clones weren’t doing so great and I believe it’s because there is a spot on the cloner I was missing when I was cleaning it..

What spot would that be? I would like to learn from your mistakes :)

EventHorizan · Nov 7, 2017

Farmer P said:
You guys have a good night.

U too bro

Dewd · Nov 7, 2017

Thanks for the good wishes guys!
I wanted to post pics but my connection sucks tonight for some reason.
Try again tomorrow

Toph420 · Nov 7, 2017

EventHorizan said:
What spot would that be? I would like to learn from your mistakes :)

The little thing inside where the fan blows air through. Looked like it had something growing in it haha.. I think I’m going to try to use a q tip to clean it out.

Dewd · Nov 7, 2017

What I found worked best with my cloner is ph solution to 6.0
Of course washing it between uses.
I run 1 cup bleach to 5 gal water. (Mine holds 5 gal) let run for a couple hours.
I used to use peroxide but bleach works better imo.
Rinse and let run with RO water for a couple hours.
Refill with new solution ph'd to 6.0
I get 100% success within 7 days this way.
Has worked great for years

Toph420 · Nov 7, 2017

Dewd said:
What I found worked best with my cloner is ph solution to 6.0
Of course washing it between uses.
I run 1 cup bleach to 5 gal water. (Mine holds 5 gal) let run for a couple hours.
I used to use peroxide but bleach works better imo.
Rinse and let run with RO water for a couple hours.
Refill with new solution ph'd to 6.0
I get 100% success within 7 days this way.
Has worked great for years

hm maybe ill try ph'ing to 6.0.. what all do you put in your cloner? its an aero cloner right?

Dewd · Nov 7, 2017

Toph420 said:
hm maybe ill try ph'ing to 6.0.. what all do you put in your cloner? its an aero cloner right?

I've used different cloners over time. I had to replace a few in the beginning because I didn't sanitize them properly. Each time I used them success went down. Finally I learned to clean them right. Lol
The last one I bought is by far the best one I've owned. But I don't know what it's called. It has 32 sites and holds 5 gal.
Water stays cool with 5 gal is res.
I've used different cloning solutions also. Almost anything works if the cloner is sanitized first. Now I just use clonex and ro water.
I bet +life would work great also. Any rooting aid probably works well. Just guessing on that.
Actually lately I've just been using plugs. Saves me time.

Polar510 · Nov 7, 2017

I have some rhizo blast Im going to try next rounds of clones, see how that does.

Dewd · Nov 7, 2017

Mama is spread eagle
Feeling the breeze
Now we can see where the sun don't normally shine

Dewd · Nov 7, 2017

Polar510 said:
I have some rhizo blast Im going to try next rounds of clones, see how that does.

He'll yeah
Does it give you a ratio for cuttings?
Anything I've ever had around here that gave a ratio for cutting I used at least once.

Polar510 · Nov 7, 2017

Just checked the bottle. No ratio for cuttings just week 1 @2 ml hmm.
Good luck on the Surgery just saw that.

Polar510 · Nov 7, 2017

Update for the Council lol. Looks like its getting close to switch.. Gave them a real good flush this Morning.

Toph420 · Nov 7, 2017

My buddy wants to try the cns17 recipe but he wants to run it in soil... what adjustments should he be making?? I’m trying to convince him to run coco but he is pretty stubborn haha...

Council Of First Knowledge, Jedi Temple Training Facility

Council Of First Knowledge, Jedi Temple Training Facility

EventHorizan

Toph420

EventHorizan

Farmer P

Toph420

EventHorizan

Farmer P

EventHorizan

EventHorizan

Dewd

Toph420

Dewd

Toph420

Dewd

Polar510

Dewd

Attachments

Dewd

Polar510

Polar510

Attachments

Toph420

Council Of First Knowledge, Jedi Temple Training Facility

Council Of First Knowledge, Jedi Temple Training Facility

EventHorizan

Toph420

EventHorizan

Farmer P

Toph420

EventHorizan

Farmer P

EventHorizan

EventHorizan

Dewd

Toph420

Dewd

Toph420

Dewd

Polar510

Dewd

Attachments

Dewd

Polar510

Polar510

Attachments

Toph420

Privacy & Transparency

Privacy & Transparency