E
ehole
- 106
- 18
so i made my own knockoff... i'm using 19 gallon brute rubbermaid totes (the brute is important) and instead of uniseals i opted to use 2 in gray threaded male and female pvc adapters $2-3 each and at most hardware stores. drilled hole out with a 2 3/8 hole saw (i can always go larger to 3" hole for uniseals if i ever feel the need). threw in 4 silicone 2 1/4:fixed: o rings per tote-2 per connection. it was water tight after the gluing the pvc slip fits into the adapters, and the 4 corner 90 elbows. it unscrews and breaks apart less than 5 minutes after drained. glue the male ends on the pvc and females go inside the "bucket"
the long pvc piece where the pump pulls from the connector there is 2 x 2 x 1/2 female threaded with a threade barb attached to the pump line. if i were to do more than then 4 i have i'd upgrade to atleast the 3/4 inch.
oh yeah this is my first post with multiple pics so i hope it lets me label under them if not sorry i'll take care of descriptions next post
the long pvc piece where the pump pulls from the connector there is 2 x 2 x 1/2 female threaded with a threade barb attached to the pump line. if i were to do more than then 4 i have i'd upgrade to atleast the 3/4 inch.
oh yeah this is my first post with multiple pics so i hope it lets me label under them if not sorry i'll take care of descriptions next post