Rolandomota
- 809
- 143
Ok 10 4 I guess you have a humidity and temperature gauge in side of your grow area and have had no issues keeping the temps and humidity you need? I only ask cause some days my humidity will be high and other just prefect.My bad, I have this one, the $119 with speed control.
I Read the info on the ac Infinity with temp and humidity control and the fan will speed up and slow down to keep the temperature it was set at. It also looks like it can shut off depending on what temp you set. You’d be better off with the $119 fan with just the speed control.
I
See yeah this is just anote6thing I dont k ow about lmao. But like everything else I'll learn.
Yeah so what I've learn is you 3x3x5x1.33=59.85 or you can do 3x3x5x2=90.You size the fan and filter to the grow space. For ventilated rooms or tents it is good to turn the air in the tent 2-3x per minute.
I used a 400cfm fan for a 4x4 tent for example.
Ok what do you mean by scrubbing or scrubber? I wanna by something to hide the smell of weed and help my plants.I use mine in a sealed room as a scrubber. I have just under 180sq feet and use 200cfm but mine is used in a different application.
@MIMedGrower do you run them at 100%. I do but again different application and mine is duel purpose of internal circulation and scrubbing.
Can't smell a dam thing from a foot away but I can smell it when I open the door in flower
I use mine in a sealed room as a scrubber. I have just under 180sq feet and use 200cfm but mine is used in a different application.
@MIMedGrower do you run them at 100%. I do but again different application and mine is duel purpose of internal circulation and scrubbing.
Can't smell a dam thing from a foot away but I can smell it when I open the door in flower
Yeah so what I've learn is you 3x3x5x1.33=59.85 or you can do 3x3x5x2=90.
Ok mine is a sealed room so I don't pull fresh air in or exhaust any air at all. It's all sealed up air tight. So I run an inline fan to suck air from the top of the grow side over to the equipment side. It goes through a carbon filter to remove the smell. When I open the doors it does have a faint smell but hardly anything.Ok what do you mean by scrubbing or scrubber? I wanna by something to hide the smell of weed and help my plants.
Lol I didn't even check his math.Huh? Its 3’ x 3’ x 5’ = 45 cubic feet. So a 200cfm 4” fan is more than enough. Thats what i use in my 3x3. And 4” phresh filters are like 69 dollars i think.
Ok I thought I had read the 1.33 or the 2 was including bends in the Pope and stuff like that. Like i said I'm learning and trying not to sound to dumb.Huh? Its 3’ x 3’ x 5’ = 45 cubic feet. So a 200cfm 4” fan is more than enough. Thats what i use in my 3x3. And 4” phresh filters are like 69 dollars i think.
Ok I thought I had read the 1.33 or the 2 was including bends in the Pope and stuff like that. Like i said I'm learning and trying not to sound to dumb.
Ok so that fan plus the filter you guys like and bam no weed smell lol I no go to jail lmaoIts good to eatimate the ducting but you should have plenty of power with a 4 incher.
Not bad.So this is my grand total
Yeah shit not bad lmao. I could save 30 bucks if I get the fan with out the cool display just the control speed switch. Just gotta figure what one I go with now as far as that goes.Not bad.
AIR FLOW
|
Get the T model. I have the S cause it all I need. The S does not have programmable temp and humidity. It may not be perfect but it's some automated control and that's better than noneYeah shit not bad lmao. I could save 30 bucks if I get the fan with out the cool display just the control speed switch. Just gotta figure what one I go with now as far as that goes.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?