Knox
- 86
- 33
Thank you sir, glad to be here.Welcome to the farm
Please read and look at his plants. He has some nutrient problems I believe. But you have more experience than I do.Welcome to the farm
will do i have a few hrs of stuff im working on but will check back after to see if anyone has taken a look.Please read and look at his plants. He has some nutrient problems I believe. But you have more experience than I do.
Welcome to the farm. Please hold off on switching to 12/12 for flower. You are having some nutrient imbalance issue that need to be fixed before you flip to 12/12. The reason why I say imbalance is two things. #1. see the kind of purple hue on the fan leaves that is usually associated with P and the rust spots are not nutrient burn but lack of calcium. Calcium needs are highest the first 3 weeks of flower.Hey everyone recently found the forum after setting up my first tents, I've recently started growing in a more serious manner and this will be my first personal grow in years.
I'm flipping my flower tent today and am definitely starting to feel that satisfactory feeling you get knowing the care and effort you put into your setup and tending your garden starts to pay off :)
5 Tally Mon plants in 3 Gallon pots - in soil less peat mix (pro mix hp)
32"x32"x63" Tent
BP2500 running at 180w dialed back from 250w - 12" clearance
Techna Flora Recipe
I picked up 5 Tally Mon clones (full on small plants at the time) which I had to top off pretty drastically for height. they've had about a week and a half to recover and have done well, and again because of height limitations I pretty much have to flip now. so I've just swapped over my timer this morning and they will be going into 12/12 at 10pm tonight. View attachment 1333065
View attachment 1333067
Took clones for future mothers immediately before topping and they are existing in the veg tent.
I noticed a bit of nute burn on a few leaves after a feeding the other day, so I gave them a little flush of ph'd filtered water as soon as I noticed it (I didn't mind to check on feeding schedule before i brought home so probably should have buffered it with some waterings right off the bat, my bad) though i don't notice the few sections of burn spreading so i think we are good for now.
View attachment 1333069
Here's a little DIY light baffle/dust filter: one at each out and intake of each tent.
View attachment 1333066
made from: pre filter for air purifier (4-6 layers is completely light proof)
View attachment 1333064
I've seen these cuts through a few harvests at work, and they produce some decently sized and incredibly sweet fruity smelling flowers.
Very excited to see what i can do with them.
Thanks for taking an interest and if you have any questions, would like more info, or have suggestions/constructive criticism I am all ears.
Until the next update ;)
Media is soil less peat mix/perlite. The purple hue might be due to camera to the naked eye its just green to deep green.Welcome to the farm. Please hold off on switching to 12/12 for flower. You are having some nutrient imbalance issue that need to be fixed before you flip to 12/12. The reason why I say imbalance is two things. #1. see the kind of purple hue on the fan leaves that is usually associated with P and the rust spots are not nutrient burn but lack of calcium. Calcium needs are highest the first 3 weeks of flower.
What is your media?
also the last feeding did include MagiCal and these spots developed after the last feeding on a few leaves...Media is soil less peat mix/perlite. The purple hue might be due to camera to the naked eye its just green to deep green.
So you would recommend holding off on flipping them until i can supplement some calcium? I'm just concerned I'll have to end up trimming them back if I hold off on flipping sort of at max safe zone for height right now...
Would a little shot of MagiCal ( N - 2% Ca 3.25% Mg 1.25% Fe 0.11%) be an option or something else?
brought it up a bit until i can read into light intensity stuff a bit more or get a meter. thanks.will do i have a few hrs of stuff im working on but will check back after to see if anyone has taken a look.
off the top i see likely the light is to intense
Is this archives selection?Hey Everyone! Its day 54 after flip and we are gettting close to harvest :D These buds have been fattening and densing up over the last couple weeks and despite the a couple of setbacks its turning out pretty well.
First off, next cycle I'll be doing a full clean of both flower and veg tents along with regular preventative treatment to prevent spider mites (and other pests but the mites came in with the clones) This was became a problem early in flower, which as most of you know is prbbably the worst time to discover your mites, and I imagine it effected yield. (I've seen these same cuts produce larger buds (be it with co2) but still, along with my cheapo PH pen swinging waayy out of calibration probably halfway through flower without me knowing I'm looking forward the next run where I'm able to avoid those problems and see how they turn out :)
Not that I'm disappointed in the end result, the bud looks great and its pungent af with the tent door open.
Haha maybe cut in about ten days or so, still alot of clear trichomes when i'm checking rn.
On a side note, running low on weed so stopped by the dispensary nearby and picked up some GMO Cookies (garlic and onion) it was superb.View attachment 1351214View attachment 1351207View attachment 1351208View attachment 1351209View attachment 1351210View attachment 1351211View attachment 1351212
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?