full melt dry sift magnified

[doobiehuffer]

 

[Fred]

What micron u use?

Whoo hoo!

 

[mal]

nice pictures

what strain, looks like lots of heads. hows it smoke?


mal

 

[spinkus]

Are those skunkmans shots?

 

[Hrpuffnstuff]

Nice

Sam's is a little cleaner ,
Looks insane dude! Very Nice,

Dry sift bubble blows doors on water bubble

you can clean out with plastic syringe and distilled water
thru different size mesh screen's if ya wana get tech ,

or a microscope like some do..


Yours looks way Killller!

 

[edux10]

how did you make that?

 

[KING_KONG_KOLAS]

Wowzers... icky sicky bro...

 

[sanvanalona]

I am super curious about the process. Is this simply refined keif? Does it taste like the product it comes out of?

 

[Hrpuffnstuff]

hiya

Savanalona , You can use the same theory as the water bag process ,
But with multiple dry sift screens , then you can go thru and refine like i mention above.....

you can get these Stainless lab sieves in any size screen you like but they can get costly ...
Depending on strain used will determine with screen set to use , sativia's have smaller thin profile trichs where as indicas tend to have larger fat trichs
Same go's for indoor vs outdoor outdoor tends to have larger trichs , indoor seem to be smaller in size for same strain
im working on a shop vac with multiple screens
see what i come up with wet and dry wise

 

[doobiehuffer]

thanks for the kind responses.

what micron used? - bubblebox screens (3 screens) 140 micron, 107 micron and 70 micron the trichome heads pictured are caught on 70 micron.

what strain how does it smoke? - mixed strains mostly kushes, smokes amazing best stuff ive ever puffed(more info below)

are those skunkman shots? - no they are my own with my own technique (basically bubblemans bubblebox tutorial technique with coupla small differences more info below). not sure how sam makes his exactly.

how did i make this? - info below :)

is this simply refined kief? does it taste like the product it comes out of?- yes and yes :) its refined dry sift to be just heads :) and it tastes like concentrated of what your herb would taste its very very very flavorful cause minimal terpene loss :) no loss of water soluable terpenes :)

heres some info im gonna cut and paste since many questions are similar to other sites ive posted. if you guys have additional questions tho dont hesitate to ask! :)


to answer the question on technique what i did to get it like that was basically using bubblemans tutorial but instead some slight differences.

i put the bud in the box (bubblebox) and let it sit awhile till its crumbly dry i then instead of using a grinder i use scissors and gently crush it and crumble it between fingers and let it fall naturally on the screen.

i find the grinder pulverizes the plant matter too much and if i dont twist it enough it leaves some chunks and not an even texture for joints so i prefer scissors.

i then use a postcard type card that is almost the width of the bubblebox so 2-3 swipes at about a 45 degree angle off the screen pushes the crumbled pile to the edge. i then scoop the pile up with the post card against the wooden edge onto a paper to roll and roll over the box and anything that falls out i just let fall naturally onto the screen to go into the next joint.

i dont card it over repeatedly on the first screen cause i dont want to lower the potency of my joints as well as break the plant matter into smaller chunks. it takes about 2 days of joints then i can start to see a build up on the screen below.

every second day or so i then card the screen below with bubblemans clear plastic card that comes with the box at a 45 degree angle slowly in all directions and most of it falls through i then pick up the other screen and card the 70u screen the same way with the clear card but slower and at diff angles prolly ranging from 35 degrees to maybe 75 degrees? off the screen if that makes sense hehe. i do this carding in maybe 5-10 min sessions max and just do it every coupla days and once a week or so i have a super tasty super strong super headrushy full melt dry sift just from rolling joints and i notice 0 decrease in joint potency. great little box hehe.

-------------- second part (additional info)

strain wise its multiple strains mostly bc kushes many varieties of purple kush, some master kush, some sativas grapefruit etc. so its not just one strain per se but many BUT.... im not sure if one strains trichomes are catching more on the 70u.

regarding sifting process i usually sift every second day or so after rolling about 15-20 joints over the box. basically as soon as i see even a SLIGHT build up i start carding. i find carding and cleaning smaller amounts easier as well as quicker and more time efficient i only spend maybe 10 mins max every other day carding i prolly spend more time on the 70u overall cause it is more delicate and has to be done slower. but for an entire week prolly an hour max of carding broken up into 10-15 min sessions or so (i dont time myself).

every 2nd day after im done carding or when i want some hoots of kief i collect all the resin off the black plate and smoke it in a bong with cold fresh water no ice(on ashbed in a luke wilson bowl from aqualabs with built in glass screen not metal) but i LEAVE the 70u to collect for about a week and keep recarding it every second day (i do not run the black plate stuff through again i smoke it)

for your question on card angle im still working on my technique but i find 45 degrees sufficient for it to fall through then when i get to the 70u screen i card it using various angles of holding the card like i almost lay it flat like buttering toast and spread the kief out then make it a sharper angle and push it around as a pile then spread it out and repeat very slowly and very delicately. i find moving it up down and diagonal helps(regarding to the square pattern of the screen) hope that makes sense. another thing i do is if i notice visible small green peices on the 70u screen (visible to the naked eye) i flick them asside carefully with the corner of the clear card(so as not to turn the visible contaminate into microscopic) and make a tiny contaminate pile usually only 2 or 3 specs not really a pile but i keep it together so i can touch my finger down and pick it up just by dabbing my finger on the screen i then continue carding the pile hope that helps

i really wanna thank bubbleman again for the awesome products and sam the skunkman for showing whats possible. im far from sams quality but it is great inspiration. thanks again guys. peace.

edit: adding more info from another thread to keep it in one place.

-when you get down to the 70u pile it all into a pile and get a slip of white paper nice and clean. scoop up a small small amount that would fit under the microscope. look at this under the microscope (or loupe if it works) and if you use a usb one take a picture or memorize and note the head:contaminate ratio. put the kief back on the 70u to clean more.

-use the same method(technique) your trying to evaluate and clean on the 70u then after 5-10 minutes of gentle carding using the SAME method to eliminate variables. scoop a small amount up again with clean white paper again check under scope the head:contaminate ratio is it better or worse? it should most likely be more heads and less contaminate.
-repeat this till clean(if ratio improves each time magnified) OR change technique till it cleans it faster etc.

i also should add that when im cleaning the kief on the 70u ive noticed lately without magnifying that its usually done when the pile stops shrinking or starts shrinking very slowly. it has taken me many cleanings to be aware of the rate at which kief contaminate ie capitate stalks etc fall through(i still magnify). but the pile basically stops shrinking(shrinks real slowly) when the heads are left. hopefully soon ill make a breakthrough and be speed cleaning the sift scalable to large amounts haha once i do ill let you all know how if i get it super fast peace

 

[sanvanalona]

Thanks so much Hrpuffnstuff and doobiehuffer, lots of info that I will put into practice very soon.

 

[seamus]

Respect DoobieHuffer,you just know that's gonna taste sweet,brilliantly detailed thread,thank-you Farmer.Cropping my Cheese and AK this week,cant wait to try your methods out.I'll be lookin out for your future work,Happy growing,Seamus

 

[707SebTownOGkrew]

doobiehuffer, i respect your methods id like to talk to you about some new ideas if your down.

 

[Gnostic]

great pix! I just finished my 2nd run with the bubble mans box and you are right the 70u is the real deal. although I am not complaining about the standard 125u screen it is a pretty damn good in its own right.

 

[Capulator]

where do you get the screens/bubble boxes?

Cool thread!!!