with these inverter mini splits is a 3 ton the largest available? Does the line set have a maximum span from condenser to coil? Running two splits may be my best n safest option.
thanks! yeah a decade or more back the residential r-22 days. when recovery was just started to get regulated. is when I worked for the fam doing furnace n ac cleanings and installs. I can put it together and take them apart. I know nothing about sizing and the new technology they have today 410a etc.
I took a look at the specs of the Mitsubishi mr slim and my line set length is well in range. thxIn a single zone unit 3 ton is the biggest. Line set max distance is set by the manufacturer of the unit. You have to see their specs for each unit. How far are you talking?
I have a question about cooling the DIY window AC box's I see around quite a bit now.
I built one myself as a supplemental to my mini split.
I am wondering if I should leave the fan exhausting the box I built around the coils (675cfm 8" max fan) on 24/7 or if its ok to just let it cycle on and off with the AC unit?
It is currently being controlled by my Sentinel CHHC-4.
The AC is a 12000BTU window unit I stuck through the wall (rigid insulation).
Hey CannabisJohn, curious to know what you think my ac needs would be with a room that is running 8000watts in the evening strictly? The size of the room is as of yet undetermined but I would venture a guess at 500-600 sq ftIn a sealed room it may be enough a/c but in your case I think not. I would do minimum of 8000 btu unit
Hey CannabisJohn, curious to know what you think my ac needs would be with a room that is running 8000watts in the evening strictly? The size of the room is as of yet undetermined but I would venture a guess at 500-600 sq ft
Is there stand alone versions that would fit my needs? I'm considering getting gavita pro 1000 x 8 without air cooled hoods to optimize my lumens.3-4 tons.
Is there stand alone versions that would fit my needs? I'm considering getting gavita pro 1000 x 8 without air cooled hoods to optimize my lumens.
Something that could handle cooling the room on its own and isnt hanging out of a windowNot sure what u mean by stand alone?
preferably 1 unit as opposed to multiple unitsNot sure what u mean by stand alone?
Something that could handle cooling the room on its own and isnt hanging out of a window
@5-6000 btu/9-kw On the low end 45,000 to 54,000 high end btu's total. Whats ur opinion on a 5 ton mobile home (RV) ac being able to handle this size load? Will this style of AC work? thx! D-dawg
Thanks for the compliment. That size unit should be enough for at least 2 lights.Hi John. Let me start off by saying I'm a huge fan!
Last night I just sectioned off a garage with an insulated dry wall...wall. I would estimate the room to be 10'x12'. For the summer only gonna run 1 1k gavita on a mover since I live in so cal and temps push in the low 100's. I was thinking since the rooms insulated I can get away with a 12,000 btu window unit. I would estimate the room to be, give or take, 120 sq ft.
Truth be told. Trying to take the cheap way out since I already have the window system.
Edit: actually after reading through the thread a bit I think it's a yes.
Something like this might work.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?