Grow Room Automation

[lino]

LinoTron is my CPU shared with the world running LattePanda and Hacker software for about everything you need to get into.
LinoLatte.com is where I sell new and used robot and Grorobot grow parts and We distribute and document cannabis genes and document cannabis pedigree hopefully going up in the next cpl days.
LinoLabs is software and hardware to accommodate plug&play for my devices.
The Lino Sarter kit, what I showed in the video , that instructs Arduino and does not come with the LinoTron GetHealthy device.
LinoCloner, the plug & play version is more than a clone machine and a electrical controller. The LinoCloner comes with software that customizes nutes specific for each pot. The LinoCloner comes with the most complete line of Nute on the market, I took NASAs work and exploited the plant nute packs to work on humans, pets and plants, they will pack on muscle and increase human endurance and add to your plant yields, I'm back down to almost a 5 min mile and I've went from 215 down to 161 today, Based on plant run off or urine the LinoTron GetHealthy device will increase your sex performance x5 -throw that viagra in the trash, Viagra for old guys that dont have a 20yo GF or a LinoTron and if you're holding fat is will dissappear quick.

No other FULLY auto clone machine on the market
No other machine for under $100.
No other clone machine that customizez nutes based on plant needs.
No other Arduino Starter Kit to teach automation out there that doesnt leave users with a flashing LED when done, My kit leaves students with a clone machine they build and a controller that will control grow rooms for the cost of a Arduino Starter Kit.

Guys,,, can anyone post some links of FULL grow ROOM Automation Kits that easy to understand, plug in and it works, and is less than $100 , i cant find any, can you? The ones I do find, take a programmer and a electrician to install.
I just finished going though the so called DIY grow kits, pumps , boards, sensors, available and they were all junk and took lots of wisdom to get them to work... They were all trash...

 

[AvidLerner]

Update on the grow room automation project. The idea is to create a modular solution, single zone, dual zone and triple zone. The single zone can perform both veg and bloom capabilities.
The single zone will provide control over lights, fans, water, ac, co2, and humidity. The single zone will have a six relay esp8266 controlled outlet with discrete connections and a dht22 temp/humidity sensor.
The system is running on mqtt, eds8266 wifi with lua programming controls for wifi and mqtt messaging, all running opneHAB installed on an rpi3+. Testing of relay board is under way single sonoff units work great already.

 

[AvidLerner]

Update:
I have completed re-programming of the ESP8266E development board and connected the board via wifi to my mqtt service, which is a message and transport service, allowing devices to communicate with established criteria on both sides.

I use node-red for development and final transfer to openHAB after all programming is completed and tested.

I am using three relay boards with two 10A/250V or 10A /125V relays. The relays use 5v control to turn the relays on/off. I have programmed the ESP8266 to communicate with both mqtt receiving and sending updates on each relay to node-red which will be openHAB upon final completion.

A single zone will need 6 relays, 1.light, 2.recirculating fan, 3. CO2, 4. F&D/Hydro pump, 5. AC, 6. humidity as well as gathering temperature and humidity data and taking action based on established limits of heating/cooling demands.

The system will run on an a raspberry pi 3+ with 250 gb HDD running openHAB2 and mqtt with access to router for wifi allowing both local and remote access with password protection and no cloud-based activities. All activity is behind the router except when you access with smartphone over internet, otherwise smartphone is inside router, as well. So the system can be run from a smartphone if desired.
namaste

 

[Eli Bloom]

This is an amazing thread! Love what you guys are doing. I'm in the market for IoT automation in my home grow because I travel for work but can't stomach the cost of commercial solutions like smartbee controllers.

 

[AvidLerner]

If you look at the Hurricane led controller, you will see where it has capability to add two different sensors to the controller by the user. When you look at the Hurricane Controller Code, it has testing for connected devices, like a windows usb device approach.

With that in mind, some aircraft connectors with labeled output for various sensors to be connected, and more devices. I see plug and play for grow automation as being a box with six control relays in it labeled for LIGHTS/FAN/WATER/AC/RH/CO2. Plug in a device into the outlet, after plugging the outlet into the wall and the device is available for programming and control at the outlet. No device connected no programming available.

 

[visajoe1]

Update:
I have completed re-programming of the ESP8266E development board and connected the board via wifi to my mqtt service, which is a message and transport service, allowing devices to communicate with established criteria on both sides.

I use node-red for development and final transfer to openHAB after all programming is completed and tested.

I am using three relay boards with two 10A/250V or 10A /125V relays. The relays use 5v control to turn the relays on/off. I have programmed the ESP8266 to communicate with both mqtt receiving and sending updates on each relay to node-red which will be openHAB upon final completion.

A single zone will need 6 relays, 1.light, 2.recirculating fan, 3. CO2, 4. F&D/Hydro pump, 5. AC, 6. humidity as well as gathering temperature and humidity data and taking action based on established limits of heating/cooling demands.

The system will run on an a raspberry pi 3+ with 250 gb HDD running openHAB2 and mqtt with access to router for wifi allowing both local and remote access with password protection and no cloud-based activities. All activity is behind the router except when you access with smartphone over internet, otherwise smartphone is inside router, as well. So the system can be run from a smartphone if desired.
namaste

Whats the latest?

 

[lino]

Hey Avid and the rest,
I ve had no time for my last project, to busy with other projects, the Auto-Cloner is sitting in the corner doing nothing.

In about 23 days away until my beta Augmented Reality hardware will arrive in the mail from Microsoft.
I will program for a 3D world using Starling as my foundation. In Augmented Reality I am to develope an Augmented world in your grow rooms:

The Beta Bio AR eye wear. Augmented Reality for a biological world.
Incoming data in Augmented Reality AR'
The possibilities are endless and dependent on the imagination,

• grow room Warning on all data, temps, PH, and on and on
• AR lens filters specific to light conditions, so users can go to different light conditions with eyes protected
• find disease specific PM weeks before the human eye can detect it in AR.
• visual of hot spots in room in AR.
• see temps and air movement in AR.
• Light levels in AR
• deactivate alarms and locks if the correct eye iris has on the AR glasses.
• connect to any DB a personal DB or law enforcement - the MED database any DB could record all incoming data from the AR.

Out going data in Augmented Reality AR

• Brainwave Technology- record
  -can be used for lie detection sort of speaking. Can tell employer or anyone if your having diabolical thoughts in the grow room.
• 
  
• Hardware switches and cellular connection. The AR can pull up security monitors no matter where you wear them. You and whoever is allowed will see all activity in the room, You will control everything in the grow room in a AR world

Personally I cant see myself walking around a grow room all day with these big ol glasses on, I envision them hanging around my neck and I put them on when I need the tools in AR. But a software programmer mission will be to force the user into wearing his glasses as much as possible,
A programmer with a mic a few day ago got them working with google voice, apple voice and window voice, so the dam glasses can run everything, devices like ,something like Google home and on and on, the possibilities are exploding!
Apps that already exist;
8'x8' or any size! TV pinned to the wall and more resolution that 1080 pi ,wtf
all devices in AR world, phones. watches, tablets, . in download apps
cell phone in AR.
Computer will be in AR.
You wont need a Apple or google watch, you download the AR Watch app.

AR is going to eliminate the 4" cell phone screens very soon. Our grand kids will laugh on I phones...

 

[lino]

Star Trek was 1st. google glasses, digital cloth devices

 

[lino]

IS a simple 110/240V AC controlled network typology the Answer to plug and play, cost reduction and simplicity ?...
So how to make this better! @lino ’s build has the key to it!

Augmented Reality AR is the latest greatest imo

I hope to shit on you guys reality here in a minute:

CPU, Web cam & Trackers, any CPU, (Win10 laptop, LinoTron, Apple ). I got AR working with a web cam,, I guessing someone else has already done this in the grow industry and what I'm going to talk about 2 dimensional AR . This open up the whole dam AR world,,, I doubt I can Blog write well enough to pass this concept but check it out.
Before I start let me explain something , I describe this as second dimension in AR world.
By using the web cam to go AR world on computer screen, (i have seen no one go 2 or 3 dimensional worlds with VIRTUAL AR trackers (coded VR not real Trackers), but check it out',,
Then I was shocked to see this work, I built AR Trackers that are visible to AR headsets only on CPU screen, and it works on web pages (thats a game changer, so Im sure someone else is doing this but as far as I know this might be the 1st ever build of a AR websites as far I know., ya thats twisted, Think about this now, your CPU can generate holgrams base on the AR Trackers that you see through a AR headsets looking at AR world on your CPU monitor.
detailed 1 dimensional

• So you're web cam looks at a physical Tracker.
• Web cam is USB or wireless to your CPU monitor.
• Web cam view a Tracker and you see AR world on your CPU monitor,,,,

Okay I got AR world via Virtual Trackers on a CPU monitor, unreal, 2 Dimensional....

meta data is actual yellow pixels in your images and videos. You see it in text but not in the image or video.

Follow my point;
You cant see meta data with in images. So I build the Trackers in meta data but heres the kicker, the freaking AR Headsets detect the meta data on printed images, web pages or what ever image appears on your screen or where ever else you want to HIDE it or make it public , with my AR meta data that cant be seen with the human eye its endless. turn around and there could be any hologram behind you, I could blind you with a blk cloud cloaking encapsulating your head...
HOW TO CONNECT AR TO ARDUINO
And if this is the LinoTron LattePanda Board , HOLYSHIT, the poss are endless,
So I'm using my C+ to run the Arduino, follow me,
LinoCloner running on C+ talking to Arduino. Flash ActionScript grabs C+ varibles. We let Lino C+ continue to control LinoCloner.
Flash will talk to Starling 3D code Unity and the like, Flash is the 3D building tool AND connector to AR world.
Wireless web cam can capture physical and VIRTUAL AR Trackers in ActionScript written in Flash.
Now you can control the LinoCloner in Augmented Reality from anywhere and think about this, Now I'm going to TAKE A BIG DUMP ON EVERYTHING YOU THINK IS REAL RITE NOW!
Look to your left at my Avatar, Guess what your looking at. I'm years ahead the rest and my avatar is just another example - but that is a mind tracking system so I can read your thoughts, This is going to hurt you bad and you guys are probably not ready to read this nor are you are aware of this but my AVATAR is much more then QR code. for a while now, you see,, there are 4 lines, to lets say 20 lines of JavaScript code that can be pasted into any header of a website and follow you forever by LOCKING in on you.
HOW? wtf
Google and universal analytics are in billions of web pages. I developers have a special Google Analytics and Universal JavaScript that has many new features, and yes , You Checked the box allowing developers like me and millions more to legally track you.
Facial Recon
Location
Facebook
Linked IN
Google everywhere
Apple finger prints
all the pics you ever posted
The data I have on you would blow you away but not just million of deveopers use Analytics, their all tied to bout 5 big giant PUBLIC cookies where everyone looks at your data you've allowed us to gather on you, simply amazing, How we lock on you,
I've have AR meta data in my Avatar for a while now... This is hard concept for you guys to follow... Remember Lino is controlling the LinoCloner in our Dimension and a 4th Dimension with AR . Think about it,,,, IT 2 WAY communication, i'm talking to the LinoCLoner In AR by shutting off water. But with a database to hold the memory and universal cookies is where i gather information thru AR but lets not forget the DataBase is connected all the the time. I need some toilet paper,

AUGMENTED REALITY WORLD EXIST WEATHER YOU GOT THE GLASSES ON OR NOT. AR world is in you home from anywhere, Lino can HIDES his TRACKER in any font, pic, video, web page printer paper any coin, Facial Recon anything. OR I can go In another Dimension and youll never see my AR. You'll never know If you've hit my AR world, sick I know, it very sick... we cant stop this . So long story short AR is now tied to Universal & Google Analytics Tracking and I guess we'd call it Google AR Analytics or Universal AR Analytics, and as with the example Lets say my AR world talks to peoples Google Home it endless. AR is talking web pages, paper coupons, bar codes and QR codes and can be the same thing meaning in can be bar code , QR code and AR code Tracker, AR Trackers and AR worlds need a way to interact but you may not see it, Camera is very good example, BOOM face recon, hook to Facebook, google, pull world wide cookies, all you phone data, within seconds and store it to large Public Unversal Cookie in seconds and anywhere else VR want to store but it needs a device connection to physically enter your world weather you see it or not.

QR, Bar codes, are created from typing, Fonts.
Trackers and META DATA are 2 different things , I have combined them and I havnt seen that dont yet and AR Tracker can also be a QR code , dollar bill or whatever I want it to be to track you there the same thing, a Tracker to track ppl or interact with connected Devices.
Meta Data , is dots that are embedded in an image and you cant see it or read it.
GET IT !
My Avatar is WHATEVER HOLOGRAM and MIND ALTERING effect that I want to impose on you... when look at my Avatar with AR Headsets, AND (If you got the bad boy headset with MindWave Technology) I will gather all you thoughts instantly and I'll input my brainwash code,, AND this not hypothetical this is real rite now....
As you dream it , Ive done it....
I'm Twisted , this twists my mind,,, VIRTUAL AR Trackers in different dimensions taking us to different worlds in other dimensions, thats twisted.

Here is a 1 dimensional way to control your grow room in AR.

Imagine this Art Gallery to be your grow room. Trackers could be placed on each plant to feed AR data, you'd look at visuals of plant health and environments, PH, Lite, temp, with a web cam or with AR glasses in the grow room or thru a web cam to monitor and control grow room automation.

Its easy to build 3D for AR world, I could use a 3D Trump to control the LinoCloner with AR. And with your cell phone your in AR world also. Example below;
This guys shows you how to save the USA in AR world depicted in an AR game and he builds it for you in less than 6 minutes! Programmer 3d.
HOW TO BUILD THE 3D
build AR in 6 minutes for free.

 

[lino]

Prototype I
Material; paper, carbon fiber, copper, silver, gold, lithium.
IR 250 ft
My 1975 design. 2 sheet of paper
30 minute of flight time
twin props
landing gear


Prototype II improvement and additions
paper and carbon fiber camera mounts and
paper landing gear improvement.
I' might post some @ 150 ft launch and see if the weather and plane design will let it climb to 300 ft from Denver sky scrapers test flights. SHssss.


prototype I
Getting ready for secret paper treatment. Carbon fiber hollow tubes for wire and light wgt.

 

[gromyjoe]

what ever happened to this project?