Grundo’s first RDWC attempt.

Grundo · Feb 8, 2020

I understand. That helps a lot! Thank you!

Grundo · Feb 9, 2020

Well 1 of my blurples after 2 months is taking a crap. Diodes burned out in a corner. Waiting for reply from company but in the meantime I’m getting 550 V2 R-Spec. Going to add with the other 4 including the defective 1.

FourthCity · Feb 9, 2020

Grundo said:
Well 1 of my blurples after 2 months is taking a crap. Diodes burned out in a corner. Waiting for reply from company but in the meantime I’m getting 550 V2 R-Spec. Going to add with the other 4 including the defective 1.

Sorry to hear that, hopefully they will exchange it for you under warranty. You're gonna love the hlg 550, but I am curious why you are choosing it over the less expensive 600, is it just the assembly? If so its easier to put together than Ikea furniture and it comes with everything you need except a wire stripper.

Grundo · Feb 9, 2020

Actually my short memory has failed me again. I guess I forgot. Yeah I can put stuff together plus more watts right? I haven’t ordered the light yet so I will order the 600. Thanks!

FourthCity · Feb 9, 2020

Grundo said:
Actually my short memory has failed me again. I guess I forgot. Yeah I can put stuff together plus more watts right? I haven’t ordered the light yet so I will order the 600. Thanks!

No problem, the 600 is $90 less and 140 more watts than the 550 which makes it a pretty good value.

visajoe1 · Feb 9, 2020

Nice grow @Grundo, very impressive with the RDWC. Those lights are nice, but these namebrand LED's just seem way to costly still. I built my own a few years ago, half your wattage for less than $250 (got my stuff from cobkits.com). That technology is cheaper now of course. $1600-1800 for one of those XL 1000 wifi's is a bit too high for this PPFD (700-1200 is ideal). However, you could probably supplement these with additional LED's to raise your PPFD and realize that tents potential with a well run RDWC

Grundo · Feb 9, 2020

@visajoe1...a little confused, your saying my ppfd was a little high but I need to supplement more light to get the ppfd higher!

visajoe1 · Feb 9, 2020

Grundo said:
@visajoe1...a little confused, your saying my ppfd was a little high but I need to supplement more light to get the ppfd higher!

i said the cost is a little high for that PPFD number

Grundo · Feb 9, 2020

Ok gotcha...thanks. Sorry still learning

Grundo · Feb 27, 2020

a little update..just started week 5.

Anthem · Feb 27, 2020

Grundo said:
a little update..just started week 5.

Plants look great, like mentioned you will benefit from quality LED's. Pulling 4 oz a plant will be interesting. Let us know how you do with the grow.

FourthCity · Feb 27, 2020

Anthem said:
Plants look great, like mentioned you will benefit from quality LED's. Pulling 4 oz a plant will be interesting. Let us know how you do with the grow.

I think I spied at least one new led in the last update. Agreed that the plants are looking healthy and it looks like the genetics are strong too.

Grundo said:
a little update..just started week 5.

If you have hung some additional lighting and continue to stay dialed in then I think 4oz per plant is looking more and more possible. My only critique on the progress is that it looks like there is a little bit of extra stretch happening, I've found I can reduce this in my plants by limiting the temperature drop after the lights turn off. I usually set my space heater to whatever the average leaf temp is during the day, that way it never drops more than a couple degrees below the lights on ambient temps. The stretch isn't what I would consider that bad but its the only place I see room for improvement. You should be proud your first grow is going so well, some people struggle just to understand the basics but you are clearly picking this up pretty quickly.

Grundo · Feb 27, 2020

@FourthCity...I appreciate that!! I wondered what was causing a late inning stretch. Makes sense, and thanks for the tip. I’m gonna be a little light on final weight as I had to yank 3 Durban Poisons due to nanners. 2 of the 3 were my smallest so maybe they got stressed a little but the 3rd one was doing pretty good. I had read that DP especially feminized were prone to hermie. I know a few people that grow it with very good success, me not so much. I do have 21 very nice, stinky, sticky ladies. A few more weeks and I should be good. Next grow is about to begin with an all Ethos Genetics line up.

FourthCity · Feb 28, 2020

Grundo said:
@FourthCity...I appreciate that!! I wondered what was causing a late inning stretch. Makes sense, and thanks for the tip. I’m gonna be a little light on final weight as I had to yank 3 Durban Poisons due to nanners. 2 of the 3 were my smallest so maybe they got stressed a little but the 3rd one was doing pretty good. I had read that DP especially feminized were prone to hermie. I know a few people that grow it with very good success, me not so much. I do have 21 very nice, stinky, sticky ladies. A few more weeks and I should be good. Next grow is about to begin with an all Ethos Genetics line up.

With the number of seeds you sprouted some of them were bound to have some nanners, it doesn't look like it was anything you did though. Were there a lot? If its just a few you can mist them with a little water which sterilizes the pollen and then pick off the sacks. I rarely toss a plant unless its full blown hermed but those plants do tend to get a handful of seeds. Pull them or not, no wrong answer, some people think a few nanners will ruin a whole plant but when they are managed properly that has not been my experience. In your case with so many plants they will probably fill in the recently vacated space and make up for any loss from the three you removed. Do you have another tent or room for the next grow or are you just lining things up for after you harvest the current crop?

Grundo · Feb 28, 2020

I just pulled the plants..I didn’t want to infect everything else. The other ladies are loving the extra room. I don’t have another tent but I do have a humidity dome that I’m going get them going in. I just have to time everything out. Eventually this will turn into a perpetual grow.

FourthCity · Feb 28, 2020

Have you thought about where you are going to dry your harvest? If you use the tent for drying I would germinate the next batch whenever you chop these plants down, if you do that the seedlings will probably be ready to go into the buckets right around the same time that the hanging buds are dry enough to be placed in jars.

Grundo · Feb 28, 2020

If their all ready in time that’s the plan. If not I’m prepping another room for drying. It’s gonna be a juggling act for sure!

Grundo · Feb 28, 2020

Any idea if the frosty white top is something to be concerned about?

Grundo · Feb 28, 2020

It’s been like that since the start of flower. Is it another hermie? I think it’s accelerated bud development...but I’m certainly no expert.

FourthCity · Feb 28, 2020

Grundo said:
Any idea if the frosty white top is something to be concerned about?

No, just lots of pistols. Some strains have more than others but its never a bad sign to see that many early on.

Grundo’s first RDWC attempt.

Grundo’s first RDWC attempt.

Grundo

Grundo

Attachments

FourthCity

Grundo

FourthCity

visajoe1

Grundo

visajoe1

Grundo

Grundo

Attachments

Anthem

FourthCity

Grundo

FourthCity

Grundo

FourthCity

Grundo

Grundo

Attachments

Grundo

FourthCity

Grundo’s first RDWC attempt.

Grundo’s first RDWC attempt.

Grundo

Grundo

Attachments

FourthCity

Grundo

FourthCity

visajoe1

Grundo

visajoe1

Grundo

Grundo

Attachments

Anthem

FourthCity

Grundo

FourthCity

Grundo

FourthCity

Grundo

Grundo

Attachments

Grundo

FourthCity

Privacy & Transparency

Privacy & Transparency