THCFarmer.com
121,267 Members Log In Register
Log In Register

Help first time grower

  • Thread starter Thread starter JulianY413
  • Start date Start date
  • Tagged users Tagged users None

Help first time grower

JulianY413 41 Replies 4,532 Views
Page 2 of 3 · Replies 21–40 of 42
#23
JulianY413 said:
I looked at its 600W and okay so a Gaia Greene all purpose 4-4- is maybe not as best compared to the pure blend pro grow ?
Click to expand...
Uts will work but it's a slow release so less control and takes a while to break down. I'm not the guy to tell ya how to use it bit other maybe can.
 
#24
Ok that light is about 115watts. Will cover about a 2x2 area. I would keep it around 16-18" above the top of the plant. For a 12/12 light cycle and maybe 20-24" if on 18/6 light cycle. With both switches on
 
#25
This cool temps causing slow uptake has mainly is due to the fact that cooler water is thicker than warm water? As long as the ph is near neutral? Ive noticed the colder wateris the more resistance it has when stirred. Now the lower the ph is it does the same thing, seems as if its thinner when warm or low ph like 4. I found this out when i was reducing alkalinity with P acid...it brought the ph down from 7.8 to 4.3. It felt thinner...maybe im wrong
 
#26
Aqua Man said:
Ok that light is about 115watts. Will cover about a 2x2 area. I would keep it around 16-18" above the top of the plant. For a 12/12 light cycle and maybe 20-24" if on 18/6 light cycle. With both switches on
Click to expand...
Both switches on for both light cycles ?
 
#27
Flexnerb said:
This cool temps causing slow uptake has mainly is due to the fact that cooler water is thicker than warm water? As long as the ph is near neutral? Ive noticed the colder wateris the more resistance it has when stirred. Now the lower the ph is it does the same thing, seems as if its thinner when warm or low ph like 4. I found this out when i was reducing alkalinity with P acid...it brought the ph down from 7.8 to 4.3. It felt thinner...maybe im wrong
Click to expand...
I just started growing and I’m not too sure on how to pH my water and I don’t do it currently, is it super integral growing ?
 
#28
JulianY413 said:
Both switches on for both light cycles ?
Click to expand...
Yes both on all the time.
JulianY413 said:
I just started growing and I’m not too sure on how to pH my water and I don’t do it currently, is it super integral growing ?
Click to expand...
In a buffered peat mix no need unless adding silica which you aren't. The peat will buffer the PH.

Yeah
Flexnerb said:
This cool temps causing slow uptake has mainly is due to the fact that cooler water is thicker than warm water? As long as the ph is near neutral? Ive noticed the colder wateris the more resistance it has when stirred. Now the lower the ph is it does the same thing, seems as if its thinner when warm or low ph like 4. I found this out when i was reducing alkalinity with P acid...it brought the ph down from 7.8 to 4.3. It felt thinner...maybe im wrong
Click to expand...
I dont think it affect the absorption like PH but more so the transportation of the nutrients because of the decreased transpiration rates. Could be as you say though the viscosity of the sap.
 
#29
Flexnerb said:
This cool temps causing slow uptake has mainly is due to the fact that cooler water is thicker than warm water? As long as the ph is near neutral? Ive noticed the colder wateris the more resistance it has when stirred. Now the lower the ph is it does the same thing, seems as if its thinner when warm or low ph like 4. I found this out when i was reducing alkalinity with P acid...it brought the ph down from 7.8 to 4.3. It felt thinner...maybe im wrong
Click to expand...
I tried editing but i didnt look back at grammar and context..lmfao that makes little sense what i typed..

My thinking is the colder the moister in the pot is the more resistance that moisture jas. Therefore the slow uptake? Water is thinner when warm thicker when cool. Resistane/viscosity is halved from 20 c to 50c. Something like that.(not that we would water with 50c water) Seems the warmer water is the more readily its brought up in to the plant?

Now a lower ph will thin water as well...leats thats what happened when i used P acid to lower alk. Straight city water ph 7.8 felt more resistance than ph 4.3. The 4.3 got pretty thin...it was weird..never seen that before...

You comment just had me thinking a bit...

Grow on gents!
 
#30
JulianY413 said:
Where did you get those, and how much does it cost? My plant is already in flower so could I just start out with the bloom one?
Click to expand...

I got all that stuff at my local hydroponics store. The guys there are super helpful at my shop.

And yeah, I bought my setup before I did enough research. I will likely rely on the FFOF soil for nutes during Veg and then introduce liquid nutes into the water in the Flower stage also. MAYBE at the very end of the Veg stage depending on how long I decide to Veg and how the plants are looking.
 
#31
You got too ph your water it look like pH problems easy fix flush well with 6.0 water and test the run off after the run off should read 6.0 after flush and start pH it every watering is must great first time tho 🤟🏼🤟🏼🤟🏼🤟🏼 keep it green bro
 
#32
Aqua Man said:
Yes both on all the time.

In a buffered peat mix no need unless adding silica which you aren't. The peat will buffer the PH.

Yeah
I dont think it affect the absorption like PH but more so the transportation of the nutrients because of the decreased transpiration rates. Could be as you say though the viscosity of the sap.
Click to expand...
Okay thanks so much, sorry for the late response work and stuff, but i raised the light and started turning both of them on, and I fed it some used coffee grounds for a little food until my fertilizer comes in
 
#33
Flexnerb said:
I tried editing but i didnt look back at grammar and context..lmfao that makes little sense what i typed..

My thinking is the colder the moister in the pot is the more resistance that moisture jas. Therefore the slow uptake? Water is thinner when warm thicker when cool. Resistane/viscosity is halved from 20 c to 50c. Something like that.(not that we would water with 50c water) Seems the warmer water is the more readily its brought up in to the plant?

Now a lower ph will thin water as well...leats thats what happened when i used P acid to lower alk. Straight city water ph 7.8 felt more resistance than ph 4.3. The 4.3 got pretty thin...it was weird..never seen that before...

You comment just had me thinking a bit...

Grow on gents!
Click to expand...
Flexnerb said:
I tried editing but i didnt look back at grammar and context..lmfao that makes little sense what i typed..

My thinking is the colder the moister in the pot is the more resistance that moisture jas. Therefore the slow uptake? Water is thinner when warm thicker when cool. Resistane/viscosity is halved from 20 c to 50c. Something like that.(not that we would water with 50c water) Seems the warmer water is the more readily its brought up in to the plant?

Now a lower ph will thin water as well...leats thats what happened when i used P acid to lower alk. Straight city water ph 7.8 felt more resistance than ph 4.3. The 4.3 got pretty thin...it was weird..never seen that before...

You comment just had me thinking a bit...

Grow on gents!
Click to expand...
Thank you so much for the clarification I can be a little slow sometimes, but makes perfect sense, I’ve been trying to get the temp up it’s been at around 70 steadily now
 
#34
XxHammer said:
I got all that stuff at my local hydroponics store. The guys there are super helpful at my shop.

And yeah, I bought my setup before I did enough research. I will likely rely on the FFOF soil for nutes during Veg and then introduce liquid nutes into the water in the Flower stage also. MAYBE at the very end of the Veg stage depending on how long I decide to Veg and how the plants are looking.
Click to expand...
Awesome, I went to my local shop but they didn’t have any so I got some online, they weren’t too bad price wise but looking forward to see how it goes!
 
#35
Dankbnk said:
You got too ph your water it look like pH problems easy fix flush well with 6.0 water and test the run off after the run off should read 6.0 after flush and start pH it every watering is must great first time tho 🤟🏼🤟🏼🤟🏼🤟🏼 keep it green bro
Click to expand...
Awesome thank you so much, I think I’m definitely going to be ph-ing my water I’m not too sure how the strips work but that’s what I ordered, how to you fix it if it’s too low or high? And thanks man! And super nervous for the harvest just hope everything goes well!
 
#36
JulianY413, not trying to an ass but take the advice your given and then read up on it. You've gotten some conflicting advice here. Verify, question, confirm.
 
#37
Read this as it explains why ph in a buffered media is pointless. An unbuffered media absolutely needs to be but this is not your case. Can't count the number of times I see ph question why the runoff ph doesn't match the input ph

If you have questions after I'll will give you and answer and my reason for it.

www.thcfarmer.com

Marijuana pH Levels for Growing Weed: A Basic Explanation

In this article, we discuss proper pH levels for your weed plants; alkalinity, soil pH, tap water, and the effects of nutrients on pH when growing marijuana
www.thcfarmer.com www.thcfarmer.com
 
Last edited:
#38
Dankbnk said:
You got too ph your water it look like pH problems easy fix flush well with 6.0 water and test the run off after the run off should read 6.0 after flush and start pH it every watering is must great first time tho 🤟🏼🤟🏼🤟🏼🤟🏼 keep it green bro
Click to expand...
Doesn't work that way.
 
#39
JulianY413 said:
Awesome thank you so much, I think I’m definitely going to be ph-ing my water I’m not too sure how the strips work but that’s what I ordered, how to you fix it if it’s too low or high? And thanks man! And super nervous for the harvest just hope everything goes well!
Click to expand...
ANutrients


The stuff on the Left is pH UP and pH DOWN... It really is that simple.
 
#40
Flexnerb said:
I tried editing but i didnt look back at grammar and context..lmfao that makes little sense what i typed..

My thinking is the colder the moister in the pot is the more resistance that moisture jas. Therefore the slow uptake? Water is thinner when warm thicker when cool. Resistane/viscosity is halved from 20 c to 50c. Something like that.(not that we would water with 50c water) Seems the warmer water is the more readily its brought up in to the plant?

Now a lower ph will thin water as well...leats thats what happened when i used P acid to lower alk. Straight city water ph 7.8 felt more resistance than ph 4.3. The 4.3 got pretty thin...it was weird..never seen that before...

You comment just had me thinking a bit...

Grow on gents!
Click to expand...

Clear up viscosity..lil misinfo here i gave...lol

viscosity refers to substances that are thin, such as water, while high viscosity substances are thick. An example of a high viscosity liquid is syrup.

the resistance part is meant to say the wamer the water the least resistance, colder, more resistance.

Just wanted to clarify
 
Page 2 of 3 · Replies 21–40 of 42
Back
Top Bottom