D
Davidjreimer
- 16
- 3
Hey all,
On my third cycle in my custom built grow room. It’s about 25 feet x 15 feet.
I’m currently running 4 x Fluence Spydr 2i LED ($2000 each), and one HLG 600 R Spec LED growing in coco
I have a Quest 205 and supplemental Co2. All are plugged into a Trolmaster control module. I keep the co2 around 1300, temp around 70F and humidity around 60, which is perfect VPD according to trolmaster
I use Floraflex nutrients including Bulky B and Full Tilt.
Their “Full Strength” schedule calls for an EC of 3.0, but we use a slightly weaker mix of 2.7. Water is Ph to 5.8-6.0
Our runoff trends a little high around 3.1EC. The plants are drinking water at different rates as they go through bloom, so we’re still figuring out the ideal water schedule. Right now we water at lights on (6pm), 6-8hours later (midnight-2am) and sometime in the morning around 10am-noon. Currently “hand” watering with a pump and wand, but next cycle will set up an irrigation system
We are in Day 21 of flower, just did a medium - heavy defoliation / Schwazz yesterday. Some strains we defoliated more than others
We have 3 strains in the room currently:
1 Tray of Orange Kush Cake (Ethos) from clones under Fluence Spydr 2i
Pre-Defoliation:
After:
2 trays Bubba Kush (34 Street Seed Co) from seed under Fluence Spydr 2i. One of the trays the plants were vegged too long which is why they are so tall.
Pre-Defoliation:
Tray 1:
Tray 2:
After:
Tray 1
Tray 2:
1 tray Blue Afghani Sticky Fingers Edition (Jordan of the Islands) from clones under Fluence Spydr 2i
Pre-Defoliation
After:
1 tray of 4 bubbas and 1 blue Afghani under HLG 600 R Spec
Pre-Defoliation:
Forgot to take a picture
After:
I plan to post a pic of each tray weekly on Sunday. If you have any questions feel free to ask
Here is how they look today (Day 21)
Orange Kush Cake
Blue Afghani
Bubba Tray 1
Bubba Tray 2
Mix Tray
I’m still learning so if you have any pointers please chime in
On my third cycle in my custom built grow room. It’s about 25 feet x 15 feet.
I’m currently running 4 x Fluence Spydr 2i LED ($2000 each), and one HLG 600 R Spec LED growing in coco
I have a Quest 205 and supplemental Co2. All are plugged into a Trolmaster control module. I keep the co2 around 1300, temp around 70F and humidity around 60, which is perfect VPD according to trolmaster
I use Floraflex nutrients including Bulky B and Full Tilt.
Their “Full Strength” schedule calls for an EC of 3.0, but we use a slightly weaker mix of 2.7. Water is Ph to 5.8-6.0
Our runoff trends a little high around 3.1EC. The plants are drinking water at different rates as they go through bloom, so we’re still figuring out the ideal water schedule. Right now we water at lights on (6pm), 6-8hours later (midnight-2am) and sometime in the morning around 10am-noon. Currently “hand” watering with a pump and wand, but next cycle will set up an irrigation system
We are in Day 21 of flower, just did a medium - heavy defoliation / Schwazz yesterday. Some strains we defoliated more than others
We have 3 strains in the room currently:
1 Tray of Orange Kush Cake (Ethos) from clones under Fluence Spydr 2i
Pre-Defoliation:
After:
2 trays Bubba Kush (34 Street Seed Co) from seed under Fluence Spydr 2i. One of the trays the plants were vegged too long which is why they are so tall.
Pre-Defoliation:
Tray 1:
Tray 2:
After:
Tray 1
Tray 2:
1 tray Blue Afghani Sticky Fingers Edition (Jordan of the Islands) from clones under Fluence Spydr 2i
Pre-Defoliation
After:
1 tray of 4 bubbas and 1 blue Afghani under HLG 600 R Spec
Pre-Defoliation:
Forgot to take a picture
After:
I plan to post a pic of each tray weekly on Sunday. If you have any questions feel free to ask
Here is how they look today (Day 21)
Orange Kush Cake
Blue Afghani
Bubba Tray 1
Bubba Tray 2
Mix Tray
I’m still learning so if you have any pointers please chime in