M.S.T.
- 713
- 143
First I would like to thank all the pioneers on this forum for paving the way and sharing their hard learned knowledge. It is because of their hard work that I am able to continue my lifestyle and hobby while still keeping a low profile and remaining cost efficient. Thank You
Due to my current situation I am losing my space to grow outside my residence where I ran 2 1k hps. I am forced to go back in to my closet at home where I am not allowed to run HID. Mostly due to power consumption and hyper sensitivity to fire hazard. I am going to use a 2'x3' tent I had laying around to use for seedlings and males once in a while. I decided to get my feet wet with a cheaper prefab chinese made 2 cob Cree cxa 3070 fixture with acrylic lenses by Roleandro. I have not opened it up to take a look at the drivers yet, but it claims 400W. It is run on two seperate drivers that are cooled with heatsinks and fans, draws .5a-1.5a and up to 3 fixtures can be daisy chained together. This one is reading about 3000 foot candles on my hydrofarm light meter at 18" from canopy with about a 1'x2' spread. I plan on adding two more cxb 3590 cobs soon to see how it fills the space. Here are some pics of the tent and light setup. I plan on running these first generation clones from my seedlings of my current and last 2k HID round.
Tenn. purple kush/ Foodog/Chemdog #4/Critical+2.0/4-way/Green Crack . Thanks for looking and feel free to offer up any suggestions/contributions.
Due to my current situation I am losing my space to grow outside my residence where I ran 2 1k hps. I am forced to go back in to my closet at home where I am not allowed to run HID. Mostly due to power consumption and hyper sensitivity to fire hazard. I am going to use a 2'x3' tent I had laying around to use for seedlings and males once in a while. I decided to get my feet wet with a cheaper prefab chinese made 2 cob Cree cxa 3070 fixture with acrylic lenses by Roleandro. I have not opened it up to take a look at the drivers yet, but it claims 400W. It is run on two seperate drivers that are cooled with heatsinks and fans, draws .5a-1.5a and up to 3 fixtures can be daisy chained together. This one is reading about 3000 foot candles on my hydrofarm light meter at 18" from canopy with about a 1'x2' spread. I plan on adding two more cxb 3590 cobs soon to see how it fills the space. Here are some pics of the tent and light setup. I plan on running these first generation clones from my seedlings of my current and last 2k HID round.
Tenn. purple kush/ Foodog/Chemdog #4/Critical+2.0/4-way/Green Crack . Thanks for looking and feel free to offer up any suggestions/contributions.