M
mdterpz532
- 50
- 18
hopefully someone chimes in and helps you out..So I am a newer home grower.
Owner of a 2.3x2.3 (them 3 inches matter) ts1000 and also a 4x4 tsw2000. All mars hydro gear. Everything has been fine so far except for one thing. I think one ( OF TWO) of the drivers makes a noise when you actually power the light off using the on/off switch. When the light clicks off from the timer, it's fine. It doesn't have Amy issues or noise or anything. But if you actually power the whole light off isomg the on off button, then one of the drivers starts to make a little, but quite noticeable noise.
It almost sounds like an electrical spark or a static like shock noise. I have contacted mars hydro about this issue. And although I was not satisfied with the over all conversation, it honestly to me sounded like a chap gpt bot was answering me, and I tried my best to talk to a real human but I couldn't find anything to get me to that point. Thier phone number is an answering machine. So anyways this was their reply
""Regarding your feedback, we are still looking forward to establish a friendly relationship with you. After checking with our supplier and engineering department, every power supply has the noise, but some are big and some are small.
According to the standard, is is ok that if it is less than 24DB. This is normal of you driver. At the same time, please don't worry, all of our lights have safety certificates. If you have any questions afterwards, please feel free to contact us.
Thanks for your understanding""
Any body ever have this happen to them or something similar. It almost worries my a bit. Like why does one do it and not the other? And what is actually making the noise?.
I have just ordered the fce-4800 and that is a 430 watt bar style light. I'm hoping my next harvest will just grow that much better going from a 200w board to a 430w barstyle.
Here are some of the videos I sent to them. If anyone would like more or different videos in any way just let me know and I'll make one.
Who did you go with ? I just purchased another 4x4 kit but upgraded light this time.I'd watch that sumbitch like a hawk... Doesn't sound right at all.
I'm one and done with Mars. I like the FC-6500 well enough, but their tents are flimsy, and there's zero customer service.
All came with the kit,Have you tried another outlet on for sure another breaker, I wonder if the live and neutral are reversed, most electronics will still work but when turned off the live would still be on... just a random thought.
Def would try another circuit then you can rule that out, if it's the light system for sure. It def should not make that sound when hard powered off. Is it a self contained unit? Like did you daisy chain 2 together or did it come like that plug and play? Is the timer external plug into the wall or is it part of the driver or controller? This makes me almost think it's the circuitry.
That's not normal. Sound like it is arcing when off. I would use only the timer until resolved. or add a powerstrip to the timer and plug the light to the powerstrip. This at least adds a means of disconnect after the timer and allows you to turn off until the issue is resolved.So I am a newer home grower.
Owner of a 2.3x2.3 (them 3 inches matter) ts1000 and also a 4x4 tsw2000. All mars hydro gear. Everything has been fine so far except for one thing. I think one ( OF TWO) of the drivers makes a noise when you actually power the light off using the on/off switch. When the light clicks off from the timer, it's fine. It doesn't have Amy issues or noise or anything. But if you actually power the whole light off isomg the on off button, then one of the drivers starts to make a little, but quite noticeable noise.
It almost sounds like an electrical spark or a static like shock noise. I have contacted mars hydro about this issue. And although I was not satisfied with the over all conversation, it honestly to me sounded like a chap gpt bot was answering me, and I tried my best to talk to a real human but I couldn't find anything to get me to that point. Thier phone number is an answering machine. So anyways this was their reply
""Regarding your feedback, we are still looking forward to establish a friendly relationship with you. After checking with our supplier and engineering department, every power supply has the noise, but some are big and some are small.
According to the standard, is is ok that if it is less than 24DB. This is normal of you driver. At the same time, please don't worry, all of our lights have safety certificates. If you have any questions afterwards, please feel free to contact us.
Thanks for your understanding""
Any body ever have this happen to them or something similar. It almost worries my a bit. Like why does one do it and not the other? And what is actually making the noise?.
I have just ordered the fce-4800 and that is a 430 watt bar style light. I'm hoping my next harvest will just grow that much better going from a 200w board to a 430w barstyle.
Here are some of the videos I sent to them. If anyone would like more or different videos in any way just let me know and I'll make one.
house burn down??All came with the kit,
The tsw2000 has 2 of the drivers or ballasts or whatever they are, and one attached dimmer switch. No daisy chain attached, when I get home I'll swap to a new circuit and see.
Also the timer came with the kit but I plug timer into outlet then plug light into timer.
I wish I new electric, .I can tinker, but I like understanding and grasping what and why, I get the concept, pos and neg, but power draw and shorts and grounds get me. Watts vs volts vs ohms. Diffrent draws fron outlets to units..
I wanna bring an electrician over to make sure my three tents and all gear aren't gonna burn my house down. And I try to be particular with my wire management.
"Should there be an issue with the polarity in AC system? For a LED driver?" <- Prob not. I think you're right, it should still work either way, I'm just wondering when it's turned off at the switch it turns off the neutral and the live is still live with no return path... still prob shouldn't do any buzzing, just a random thought I had.Should there be an issue with the polarity in AC system? For a LED driver?
if this is the case for this light, it's a first for me.
If you adjust the dimmer, buzzing goes away?
Can you plug it elsewhere and test?
You still have the receipt right? : = )
In my experience, it might be a shoddy driver and could still work though for the amount of hours it's rated as. Hopefully it's not EMI noise
These are questions we may never get a satisfactory answer to : = ) Just let it go. You have a 5 year warranty on these lights, correct?I second the most likely issue being the driver or controller, but how is it getting power if it's turned off.... so maybe controller flaw instead of driver?
The mystery deepens lol
You giving any expensive equipment away?house burn down??
than don’t buy cheap equipment..
I still have it, but thinking about Gorilla tents.Who did you go with ? I just purchased another 4x4 kit but upgraded light this time.
I did try pricing out other options and kits it's just a lot and I am running out of space quick and my babies getting g root bound and not any place to up pot ATM. And yeah I am severely disappointed with thier so called customer service. I know 100% that it's only a chat bot . Every message I send to them is personalized and I'm talking to them as a human to human. But they only reply with an answer to one tenth what I actually asked them or talked to them about.
It's driving me crazy not being able to get anyone on a phone. If anyone has a rep. Or any contact information please let me know. For a rookie grower, I've given them more then enough money.. and I don't see many grow operations using 20 or 30 light counts with mars gear.. ..
Live and learn.
I get it bro, same thing with me with Advancet Nutrients. Spent a ton of money, just looking for answers to my actual questions. Like you, I hope it was a bot that answered me, unless the person is just writing scripted answers to questions.Okay. So I'll do some reconfiguring once I get back there.
It really amazes me that the reply from marshydro was that basically most of thier drivers may make some noise and as long as it is below a certain dB level than it passes as ok, I really don't think they understand that I'm turning it off, then the noise comes on, not when the unit is on.
when the light is running its quiet doesnt make a sound. And I know you all grasp that so it can't be too hard..
I'm handy with assembly and reassembly. not that I'm going to mess with it.. could possibly void the warranty.
And I'm not necessarily worries that anything I have going on would actually burn down the place.
I would toss whatever before I continued to run it.
I'm on 12&12 light cycle. So I never touch it. And the timer shuts the light off from the cord basically so that's why there isn't any noise then..
I was almost hoping that some one ( or 50 ) would peep up and be like
"Yep same problem here, it's cool, they all make noise.."
Lol.
Thanks everyone.
I'll repost when I figure something out, or to let everyone know where to send the free expensive equipment too.
i want more haha.,You giving any expensive equipment away?
I know I know. I'll get there. Hard to go "quality" before you know what you know what quality consists of.. I'll know better when it comes time to upgrade as you said. Thanks.i want more haha.,
just when it comes time to replace items, look into it..
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?