thank you brotherSixstrings Led Cob Builds
Nice setup. Plc is using the higher voltage veros now,best bang for your buck plus they run real well at 100w or less.where the cree shines at 50w or less , Vero does it at like 120w down to 50w. Would love to get my hands on that 6.2, you should email plc if you really want that fixture. I...www.thcfarmer.com
Great input JC!thank you brother
your welcome bro. If you get stuck he uses the same handle on IG and he has always been helpful helping fellow diy ers out.Great input JC!
..."six strings led cob build"
That's a monster thread. I'm getting itchy fingers!
thank you brother
Theoretically how many CFL Watt's should I use in order to make an equivalent of a 600W HPS?
Can i count on 80% energy enconomy in comparison with the 600W HPS?
That could mean that for 600W COB LED it would consume ± 120W?
They advertize ± 80% enconomy, so…
600W (LED RAW POWER)* 80%(energy economy)= 480W
So Theoretecly 120W would be its true energy consuption right?
/QUOTE]
600w at the wall is 600 w no matter the light source. To the best of my knowledge 600=600
Theoretically how many CFL Watt's should I use in order to make an equivalent of a 600W HPS?
Can i count on 80% energy enconomy in comparison with the 600W HPS?
That could mean that for 600W COB LED it would consume ± 120W?
They advertize ± 80% enconomy, so…
600W (LED RAW POWER)* 80%(energy economy)= 480W
So Theoretecly 120W would be its true energy consuption right?
Freddy,
Maybe put that question on...
Sixstrings led cob build.
You dont need an invite just post you question. I've looked and people are getting answer to build spec questions.
Don't forget when you up pot your plant Mycorrhizae are beneficial for the roots.
Have you read anything on auto's and pot sizes? If not have a read.
S
Freddy,
Maybe put that question on...
Sixstrings led cob build.
You dont need an invite just post you question. I've looked and people are getting answer to build spec questions.
Don't forget when you up pot your plant Mycorrhizae are beneficial for the roots.
Have you read anything on auto's and pot sizes? If not have a read.
S
Don't worry about the mycorr & pot size. The most important thing is you've got it planted. Bravo! It's the best way to learn. "Transplant shock" is the term used to describe 24/ 48 hours of difficulty a plant has after repotting. It would explain the Drooping leaves. Myself, I wouldn't be concerned for another 24o.I dont know if you guys noticed on the background of the pic my humidifier.
Well is just my old Smoke machine filled with water to humidify the system… I know a humidifier would be better however the smoke machine is free for me to use.
But now I'm looking for some controllers to control temp and humidity.
I have a space of 2sq-mt to climatize.
Now i would like to know how many hours should extractor and the fresh air input work per day?
For what I've imagine I will have the next scheme, using 1 temperature controller and 1 humidity controller.
HUM + -----> SMOKE MACHINE aka humidifier
View attachment 870714
HUM - ----- > DE-HUMIDIFIER
View attachment 870716
TEMP + ----- > Small Fan heater 2000W
View attachment 870715
TEMP - ----- > Fresh air blower ON (I´ve moved the grow room for my basement storage unit, the average temp is around 18/20ºC in the garage @ spring/summer, or lower in the winter months)
View attachment 870717
So inevitably and since I'm ditching the HPS, the LED would not create as much heat as the HPS, so will have to heat the grow for sure.
The thing is that every time I would put some fresh air the Temp and humidity will go down big time.
Also do you consider good to use 2 syphon's, to have a close air loop and the syphon's should open when its associated blower work.
The temperature controller I've bought is this ONE (press ONE)
View attachment 870720View attachment 870719
For controlling the humidity I bought this ONE (press ONE), since this humidity controller allow to connect an humidifier and a de-humidifier controlled by the same controller.
View attachment 870721IView attachment 870722
Now before someone say's that this controllers are not very good I'm making the grow room on a budget, so will spend roughly 100eur/120usd to make temp and hum automation.
Hope ear some advice from you guys!
Don't worry about the mycorr & pot size. The most important thing is you've got it planted. Bravo! It's the best way to learn. "Transplant shock" is the term used to describe 24/ 48 hours of difficulty a plant has after repotting. It would explain the Drooping leaves. Myself, I wouldn't be concerned for another 24o.
I understand you are technically gifted. Try to get your knowledge of autos up to to the same standard. Autos are a great learning tool.
Happy growing
The yellowing of the leaves and the fact the you don't have a way to asses the PH of the feed confirms that you need to read more about growing plants.
There is no substitute and no short cut.
THC farm is one of many great resources to help new growers. And they are all free!!
You should take a couple of days to read. Specifically Autos because that's what your growing.
RQS have a multi lingual web site
I love growing MJ
Grow weed easy
growdiaries (has 200 sensi grow diaries)
You don't have a pH meter but you have a smoke machine and a plan for design a light a humidifier and ventilation?
This is a simply auto grow that needs basic attention.
Do the reading Freddy it will pay you in good flower and fun and enjoyment.
I don't do social media buddy.
All the best.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?