Mars Hydro LED

  • Thread starter MarsHydroLED
  • Start date
  • Tagged users None
Status
Not open for further replies.
The Rabbit

The Rabbit

67
18
Day 1, Week 6. White widows (2) in 7 gal grow pots under a HLG 100 QB. Picture was after a heavy cropping, not quite lolli-popping, but took off at least 50% of the foliage.
Thinking of buying a Marshydro TSW 2000 QB for the blooming in my 3x3 grow tent. Any advice on the light is welcome.
Cheers!
 
WWx2at6weeksCoco
MarsHydroLED

MarsHydroLED

Premium Member
Supporter
1,202
163
Ready & waiting in nz. Need something different during the lockdown to play with & a new mars light would really brighten my day.
Guys, check Mars Hydro 420giveaway here
 
MarsHydroLED

MarsHydroLED

Premium Member
Supporter
1,202
163
I NEED AN LED FOR
3' X 4' VEG TENT
2' X 4' MOM TENT
2' X 3' PRE VEG
4' X 4' FLOWERING ROOMS X 2

I HAVE TWO 4' X 4' FLOWERING ROOMS. EACH ROOM HAS 2 1OOOWATT HPS LIGHTS. I WAS JUST GOING TO ADD A 400W MH TO PUT BTWN THE TWO 1000W IN EACH ROOM.

WHAT LED SYSTEM DO YOU THINK WOULD BE BEST TO GO BTWN 2 1000W HPS OVER A 4' X 4' TRAY.
I'M TRYING TO LOWER THE HEAT AS MUCH AS POSSIBLE IN MY GROW ROOMS AND TO MIX UP THE LIGHT SOURCES.

PM OR POST
TYVM
Hello juggernaut, if for the 4'x4' flower, I'd like to recommend you 2 TSL2000(300w, total 600w),
TSL2000, actual power is 300w, the coverage is 2'x4' at flower and 3'x4' at veg, so 2PCS are perfect match your 4'x4' tent. The LEDs buds will be tighter than the HPS, the average yields will be higher, and also save more heat issues, save more money in the long term
 
MarsHydroLED

MarsHydroLED

Premium Member
Supporter
1,202
163
Day 1, Week 6. White widows (2) in 7 gal grow pots under a HLG 100 QB. Picture was after a heavy cropping, not quite lolli-popping, but took off at least 50% of the foliage.
Thinking of buying a Marshydro TSW 2000 QB for the blooming in my 3x3 grow tent. Any advice on the light is welcome.
Cheers!
You are right, the TSW2000 will be a great choice for your 3'x3' tent. TSW2000 is 300w( about 24w square foot), the coverage is 3'x3' at bloom and 4'x4' at the veg stage.
 
MarsHydroLED

MarsHydroLED

Premium Member
Supporter
1,202
163
@The Rabbit , Where are you? We have warehouse in Canada, the US, UK, EU, Australia and Russia. You can order on our official website directly, www.mars-hydro.com, don't forget to use the coupon code "THC" 😊
 
juggernaut

juggernaut

1,203
163
I might have confused what I need.
1. 4' x 3' veg tent. I use a 1000w MH.
I want replace the 1k light for a LED.

2. 2' X 3' PRE VEG. I HAVE A 600W MH BLUE.
I want to replace with an LED.

3. 2' X 4' MOM TENT I USE A 400MH.
I WANT TO REPLACE WITH AN LED

4. 4' X 4' FLOWER RM/TENT I USE 2K HPS.
I DON'T WANT TO REPLACE THE 2K ON EACH SIDE.
I WAS GOING TO PUT A 400W MH IN BETWEEN EACH 1000W IN BOTH FLOWERING ROOMS.
SO I'M LOOKING FOR AN LED TO PUT IN BTWN MY 1K LIGHTS . THAT WOULD REPLACE THE 400W.
IT WILL BE A TIGHT FIT BTWN THE 2 - 1K LIGHTS. IT'S ONLY A 4'X 4' TRAY.

SO 5 LED LIGHTS TOTAL.
TYVM
SORRY ABOUT THE CAPS

ALSO NEED A GOOD WAY TO RAISE LIGHTS.
 
MarsHydroLED

MarsHydroLED

Premium Member
Supporter
1,202
163
I might have confused what I need.
1. 4' x 3' veg tent. I use a 1000w MH.
I want replace the 1k light for a LED.

2. 2' X 3' PRE VEG. I HAVE A 600W MH BLUE.
I want to replace with an LED.

3. 2' X 4' MOM TENT I USE A 400MH.
I WANT TO REPLACE WITH AN LED

4. 4' X 4' FLOWER RM/TENT I USE 2K HPS.
I DON'T WANT TO REPLACE THE 2K ON EACH SIDE.
I WAS GOING TO PUT A 400W MH IN BETWEEN EACH 1000W IN BOTH FLOWERING ROOMS.
SO I'M LOOKING FOR AN LED TO PUT IN BTWN MY 1K LIGHTS . THAT WOULD REPLACE THE 400W.
IT WILL BE A TIGHT FIT BTWN THE 2 - 1K LIGHTS. IT'S ONLY A 4'X 4' TRAY.

SO 5 LED LIGHTS TOTAL.
TYVM
SORRY ABOUT THE CAPS

ALSO NEED A GOOD WAY TO RAISE LIGHTS.
Hello, I think I got your means now.

1. TSW2000, 300w for 4'x3' veg tent
2., 150w for 2'x3' pre veg
3. TSL2000, 300w for 2'x4' mom tent
4. (150w) or (250w), for your flower tent with 1000w HPS
Usually, for 4'x4' tent, 1 1000w HPS is enough, you can add to replace that MH light, but if you think need more watt, is a great choice. The SP series the thick heat sink, better cooling for the HPS tents.

The LED is different from HPS, can't simply compare with the watt directly, need to know the LED light footprint, the coverage, which helps to make the choice.

Check Mars Hydro TS
Check Mars Hydro SP
 
MarsHydroLED

MarsHydroLED

Premium Member
Supporter
1,202
163
Lads, 4 week of flowering. First picture whit ts3000 and second one whit Cree II 256.
Are they the same strain? It seems some flowers more bloom under ProII256, because of the watt difference? TS 3000 is 450w, Pro II Cree256 is 570w. The TS 3000 buds seem tighter, and plants growing evenly.
Looking forward to see your harvest, and share the buds differences under these 2 kinds lights. Hope can get more growers' feedback, that's a great help for us.
 
MarsHydroLED

MarsHydroLED

Premium Member
Supporter
1,202
163
Hey farmers, our TS1000 is sold out in European and the USA warehouses, but other models full stock. If the customer needs small lights for growing, take consideration of the to replace TS1000

, 135w, footprint is 2.5'x3', 2'x3' and 1.5'x3'
SP150 20200314143730
 
MarsHydroLED

MarsHydroLED

Premium Member
Supporter
1,202
163
Hey farmers, which you prefer, Mars Hydro SP or TS? Or love the combo?

For me, absolutely, crazy love SP, higher yields, removable adjustable Meanwell driver, the thick heat sink for better cooling, IP65 waterproof. The most important is the appearance, I love the bar style


SP250

Mars Hydro TS 2000
TSW2000


SP250+TSL2000 (This growing pic from @Eight, 4'x4' flower:) )
Mars Hydro SP250 and TSL2000
 
Last edited:
Eight

Eight

348
93
Eight

Eight

348
93
Hey farmers, which you prefer, Mars Hydro SP or TS? Or love the combo?

For me, absolutely, crazy love SP, higher yields, removable adjustable Meanwell driver, the thick heat sink for better cooling, IP65 waterproof. The most important is the appearance, I love the bar style


View attachment 962200
Mars Hydro TS 2000
View attachment 962201

SP250+TSL2000 (This growing pic from @Eight, 4'x4' flower:) )
View attachment 962199
And both are serving me well so far.
 
chugzfarmer

chugzfarmer

18
3
Day 1, Week 6. White widows (2) in 7 gal grow pots under a HLG 100 QB. Picture was after a heavy cropping, not quite lolli-popping, but took off at least 50% of the foliage.
Thinking of buying a Marshydro TSW 2000 QB for the blooming in my 3x3 grow tent. Any advice on the light is welcome.
Cheers!
looks great! some nice training going on there
 
chugzfarmer

chugzfarmer

18
3
Status
Not open for further replies.

Similar threads

MarsHydroLED
Replies
552
Views
23K
MarsHydroLED
MarsHydroLED
Flowerhorn
Replies
27
Views
8K
vidmar007
vidmar007
MarsHydroLED
Replies
206
Views
10K
revfunk
revfunk
MarsHydroLED
Replies
5
Views
751
MarsHydroLED
MarsHydroLED
SpiderFarmerLED
Replies
194
Views
8K
Helmguard77
Helmguard77
Top Bottom