THCFarmer.com
121,113 Members Log In Register
Log In Register

Mars Hydro LED

  • Thread starter Thread starter MarsHydroLED
  • Start date Start date
  • Tagged users Tagged users None

Mars Hydro LED

MarsHydroLED 1,626 Replies 243,129 Views
Page 81 of 82 · Replies 1,601–1,620 of 1,627
Status
Not open for further replies.
#1,601
Day 1, Week 6. White widows (2) in 7 gal grow pots under a HLG 100 QB. Picture was after a heavy cropping, not quite lolli-popping, but took off at least 50% of the foliage.
Thinking of buying a Marshydro TSW 2000 QB for the blooming in my 3x3 grow tent. Any advice on the light is welcome.
Cheers!
 

Attachments

  • WWx2at6weeksCoco.jpg
    WWx2at6weeksCoco.jpg
    689.6 KB · Views: 302
#1,602
down south said:
Ready & waiting in nz. Need something different during the lockdown to play with & a new mars light would really brighten my day.
Click to expand...
Guys, check Mars Hydro 420giveaway here
www.thcfarmer.com

Mars-Hydro 420 giveaway! Everyone have fun!

Hey, farmers, first we do say thanks for your attention on Mars Hydro giveaway again, appreciate your kind love and support, we are 11 years old now and we'll become bigger and stronger, stick to offer the high cost-effective LEDs and indoor grow tent for growers. This giveaway is dedicated to...
www.thcfarmer.com www.thcfarmer.com
 
#1,603
juggernaut said:
I NEED AN LED FOR
3' X 4' VEG TENT
2' X 4' MOM TENT
2' X 3' PRE VEG
4' X 4' FLOWERING ROOMS X 2

I HAVE TWO 4' X 4' FLOWERING ROOMS. EACH ROOM HAS 2 1OOOWATT HPS LIGHTS. I WAS JUST GOING TO ADD A 400W MH TO PUT BTWN THE TWO 1000W IN EACH ROOM.

WHAT LED SYSTEM DO YOU THINK WOULD BE BEST TO GO BTWN 2 1000W HPS OVER A 4' X 4' TRAY.
I'M TRYING TO LOWER THE HEAT AS MUCH AS POSSIBLE IN MY GROW ROOMS AND TO MIX UP THE LIGHT SOURCES.

PM OR POST
TYVM
Click to expand...
Hello juggernaut, if for the 4'x4' flower, I'd like to recommend you 2 TSL2000(300w, total 600w),
TSL2000, actual power is 300w, the coverage is 2'x4' at flower and 3'x4' at veg, so 2PCS are perfect match your 4'x4' tent. The LEDs buds will be tighter than the HPS, the average yields will be higher, and also save more heat issues, save more money in the long term
 
#1,604
The Rabbit said:
Day 1, Week 6. White widows (2) in 7 gal grow pots under a HLG 100 QB. Picture was after a heavy cropping, not quite lolli-popping, but took off at least 50% of the foliage.
Thinking of buying a Marshydro TSW 2000 QB for the blooming in my 3x3 grow tent. Any advice on the light is welcome.
Cheers!
Click to expand...
You are right, the TSW2000 will be a great choice for your 3'x3' tent. TSW2000 is 300w( about 24w square foot), the coverage is 3'x3' at bloom and 4'x4' at the veg stage.
 
#1,605
@The Rabbit , Where are you? We have warehouse in Canada, the US, UK, EU, Australia and Russia. You can order on our official website directly, www.mars-hydro.com, don't forget to use the coupon code "THC" 😊
 
#1,606
I might have confused what I need.
1. 4' x 3' veg tent. I use a 1000w MH.
I want replace the 1k light for a LED.

2. 2' X 3' PRE VEG. I HAVE A 600W MH BLUE.
I want to replace with an LED.

3. 2' X 4' MOM TENT I USE A 400MH.
I WANT TO REPLACE WITH AN LED

4. 4' X 4' FLOWER RM/TENT I USE 2K HPS.
I DON'T WANT TO REPLACE THE 2K ON EACH SIDE.
I WAS GOING TO PUT A 400W MH IN BETWEEN EACH 1000W IN BOTH FLOWERING ROOMS.
SO I'M LOOKING FOR AN LED TO PUT IN BTWN MY 1K LIGHTS . THAT WOULD REPLACE THE 400W.
IT WILL BE A TIGHT FIT BTWN THE 2 - 1K LIGHTS. IT'S ONLY A 4'X 4' TRAY.

SO 5 LED LIGHTS TOTAL.
TYVM
SORRY ABOUT THE CAPS

ALSO NEED A GOOD WAY TO RAISE LIGHTS.
 
#1,607
Lads, 4 week of flowering. First picture whit ts3000 and second one whit Cree II 256.
 

Attachments

  • Screenshot_20200412-213937_Gallery.jpg
    Screenshot_20200412-213937_Gallery.jpg
    288.7 KB · Views: 261
  • Screenshot_20200412-213921_Gallery.jpg
    Screenshot_20200412-213921_Gallery.jpg
    196.1 KB · Views: 253
#1,608
juggernaut said:
I might have confused what I need.
1. 4' x 3' veg tent. I use a 1000w MH.
I want replace the 1k light for a LED.

2. 2' X 3' PRE VEG. I HAVE A 600W MH BLUE.
I want to replace with an LED.

3. 2' X 4' MOM TENT I USE A 400MH.
I WANT TO REPLACE WITH AN LED

4. 4' X 4' FLOWER RM/TENT I USE 2K HPS.
I DON'T WANT TO REPLACE THE 2K ON EACH SIDE.
I WAS GOING TO PUT A 400W MH IN BETWEEN EACH 1000W IN BOTH FLOWERING ROOMS.
SO I'M LOOKING FOR AN LED TO PUT IN BTWN MY 1K LIGHTS . THAT WOULD REPLACE THE 400W.
IT WILL BE A TIGHT FIT BTWN THE 2 - 1K LIGHTS. IT'S ONLY A 4'X 4' TRAY.

SO 5 LED LIGHTS TOTAL.
TYVM
SORRY ABOUT THE CAPS

ALSO NEED A GOOD WAY TO RAISE LIGHTS.
Click to expand...
Hello, I think I got your means now.

1. TSW2000, 300w for 4'x3' veg tent
2., 150w for 2'x3' pre veg
3. TSL2000, 300w for 2'x4' mom tent
4. (150w) or (250w), for your flower tent with 1000w HPS
Usually, for 4'x4' tent, 1 1000w HPS is enough, you can add to replace that MH light, but if you think need more watt, is a great choice. The SP series the thick heat sink, better cooling for the HPS tents.

The LED is different from HPS, can't simply compare with the watt directly, need to know the LED light footprint, the coverage, which helps to make the choice.

Check Mars Hydro TS
Check Mars Hydro SP
 
#1,609
koba said:
Lads, 4 week of flowering. First picture whit ts3000 and second one whit Cree II 256.
Click to expand...
Are they the same strain? It seems some flowers more bloom under ProII256, because of the watt difference? TS 3000 is 450w, Pro II Cree256 is 570w. The TS 3000 buds seem tighter, and plants growing evenly.
Looking forward to see your harvest, and share the buds differences under these 2 kinds lights. Hope can get more growers' feedback, that's a great help for us.
 
#1,612
Slap said:
My post and photo for contest doesn't show a like button. Can't win without a like button.
Click to expand...
You got likes on giveaway activity thread
 
#1,613
Hey farmers, our TS1000 is sold out in European and the USA warehouses, but other models full stock. If the customer needs small lights for growing, take consideration of the to replace TS1000

, 135w, footprint is 2.5'x3', 2'x3' and 1.5'x3'
SP150 20200314143730
 
#1,614
Hey farmers, which you prefer, Mars Hydro SP or TS? Or love the combo?

For me, absolutely, crazy love SP, higher yields, removable adjustable Meanwell driver, the thick heat sink for better cooling, IP65 waterproof. The most important is the appearance, I love the bar style


SP250

Mars Hydro TS 2000
TSW2000


SP250+TSL2000 (This growing pic from @Eight, 4'x4' flower:) )
Mars Hydro SP250 and TSL2000
 
Last edited:
#1,615
#1,617
MarsHydroLED said:
Hey farmers, which you prefer, Mars Hydro SP or TS? Or love the combo?

For me, absolutely, crazy love SP, higher yields, removable adjustable Meanwell driver, the thick heat sink for better cooling, IP65 waterproof. The most important is the appearance, I love the bar style


View attachment 962200
Mars Hydro TS 2000
View attachment 962201

SP250+TSL2000 (This growing pic from @Eight, 4'x4' flower:) )
View attachment 962199
Click to expand...
And both are serving me well so far.
 
#1,618
The Rabbit said:
Day 1, Week 6. White widows (2) in 7 gal grow pots under a HLG 100 QB. Picture was after a heavy cropping, not quite lolli-popping, but took off at least 50% of the foliage.
Thinking of buying a Marshydro TSW 2000 QB for the blooming in my 3x3 grow tent. Any advice on the light is welcome.
Cheers!
Click to expand...
looks great! some nice training going on there
 
#1,619
@MarsHydroLED I am putting together a 3x3 grow space and was curious is you would recommend 2 SP150s or 1 TSW2000?
 
#1,620
Status
Not open for further replies.
Page 81 of 82 · Replies 1,601–1,620 of 1,627
Back
Top Bottom