BearWater
Supporter
- 1,106
- 263
Just set your meter to ac voltage, smaller slot is hot, larger slot is neutral, round prong is ground. Put your multimeter black probe (neg/ground) in the round ground hole, check both slots with multimeter red probe and see if you get voltage. Neutral should have 0 from ground to neutral and Hot should have 120 ground to hot. If you get 120 on the larger neutral slot then your hot and neutral wire are connected wrong. As long as you see no voltage, your breaker is off.I think my question is not worded correctly : ) also I think I have it figured out. What I was worried about is the limit on the multimeter, not checking amperage for anything at this point. The multimeter has a interrupter at 10amp within the multimeter. My confusion laid within my ignorance of electrical principal lol. You wouldn’t want a multimeter that would trip at a higher amperage if you accidentally crossed wires or stuck it in something with big power. Sorry for the confusion and thanks for responding!
To answer your question Im in “south North America”and Im only trying to make sure the outlets are completely shut off with 0 chance of electrical shock (which i learned I could use a simple tester for that) duh!
Ok, thanks Newty! I told my wife if I kill myself by electrocution she needs to come here and let you guys know hahaha!! Thanks again!Just set your meter to ac voltage, smaller slot is hot, larger slot is neutral, round prong is ground. Put your multimeter black probe (neg/ground) in the round ground hole, check both slots with multimeter red probe and see if you get voltage. Neutral should have 0 from ground to neutral and Hot should have 120 ground to hot. If you get 120 on the larger neutral slot then your hot and neutral wire are connected wrong. As long as you see no voltage, your breaker is off.
They also sell outlet tester that you plug in just like a regular cord.
Even with the electric off just try not to touch opossing wires together, it's just safe practice even though it's off.Ok, thanks Newty! I told my wife if I kill myself by electrocution she needs to come here and let you guys know hahaha!! Thanks again!
Thank you! Yeah so im checking a gfci breaker that wouldn’t power anything but still tested and reset as if it had power. Knowing just enough, I knew better than to start digging around lol! Got my little touch less meter from the store and sure enough that fucker is hot! It’s raining at my house today so im going to watch some wiring videos and the “DO NOT DO THIS” videos haha. Thanks again Newty!Even with the electric off just try not to touch opossing wires together, it's just safe practice even though it's off.
You can also plug a lamp into the outlet and turn it on, flip the breaker off and see if the lamp goes off. If it's a dual outlet, check both to make sure. If the lamp goes off, the breaker is off. Still use your multimeter after this to verify there's no voltage.
I'm pretty good with both AC and DC electric so it makes me curious, was this gfci just installed or did it just stop working all of a sudden and if so what happened before it stopped working? Are you trying to use a surge protector with it? Most surge protectors won't work with gfci, that's why I ask.Thank you! Yeah so im checking a gfci breaker that wouldn’t power anything but still tested and reset as if it had power. Knowing just enough, I knew better than to start digging around lol! Got my little touch less meter from the store and sure enough that fucker is hot! It’s raining at my house today so im going to watch some wiring videos and the “DO NOT DO THIS” videos haha. Thanks again Newty!
You have voltage but not enough current to power anything it sounds like.So the plug has never worked. In the almost 7 years I’ve owned the home. I tried running my circular saw off it a few years back didn’t work and said fuck it because there are other outlets to use (I know not good fix the problem). But I did get one of those yellow extension cord boxes with like 8 ports( not sure if it’s a surge protector or not ( I’ll check that) that I plan of using as a distribution center of my lower draw equipment.
Please keep in mind, this is all a temporary until I run at least 50amps to the shed off my main breaker.
Thank you so much! I’ve been watching a shit ton of videos (which help) but my understanding of the principles and theory are very little. Thanks again. Ill post an update at some point in regards to the gfci and what I find out completely!You have voltage but not enough current to power anything it sounds like.
As long as it's installed correctly it sounds like either a bad/loose connection at the outlet or breaker, or anywhere it ties in with other outlets/switches if it's not on its own circuit/breaker. You could also have a wire with small break or it arced at some point, could also simply be a bad gfci outlet.
Nice! Let me know for sure! Glad to see your alive and your wife wasn't coming here to tell us the bad news lol!@Newty, I finally got into that GFCI! It was wired correctly so im banking on it being a bad GFCI. Getting a new one tomorrow and installing it
I absolutely will!Nice! Let me know for sure!
This made me laugh!Glad to see your alive and your wife wasn't coming here to tell us the bad news lol!
Awesome! Glad everything turned out good! I love figuring out issues with all sorts of stuff, I refuse to pay anyone to do something I know I'm capable of!@Newty bad GFCI! Got the new one in (mixed my connection up and fixed it) but works great after that. Thanks again for your guidance!
Same! If I know I can do it without killing myself I will : ) also its fun to problem solve.Awesome! Glad everything turned out good! I love figuring out issues with all sorts of stuff, I refuse to pay anyone to do something I know I'm capable of!
I do remember : ) this will have a single heater on it, but I may look into a power strip if I end of needing more goodies on that plug. Thanks again!Idk what you plan to power from the GFCI (hopefully some grow goodies!) but remember what I said before, most surge protectors won't work with GFCI outlets
hahaha!!! If you saw the pliers I was using you’d have an absolute fit!You know they make safety equipment to wear to keep you from getting knocked on your ass! And tools that are insulated!
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?