My first Brick hash attempt

  • Thread starter smokedareefer
  • Start date
  • Tagged users None
smokedareefer

smokedareefer

1,773
263
81.6 gm,
sat in boiling water for 10 min to heat mold
Filled and pressed and let it set for 10 min to cool before placing in ice water
My first brick hash attempt
My first brick hash attempt 2
My first brick hash attempt 3
My first brick hash attempt 4
 
smokedareefer

smokedareefer

1,773
263
Dirtbag said:
Would you mind sharing some of your process for tumbling?
Click to expand...
Started with a 17 liter cvault about 2 lbs. Dried it to bone dry on a table, split that into 3 piles and into baggies and into the freezer crunching and breaking up the nugs while in the bag.

Tumbler is the 500 model and holds 500 gms.

So each ach run was about 300 gms of flower. Added 8 quarters to the mix and ran the first batch for about 30 minutes and the other 2 both went a full hour with little difference in appearance.

I'm making some oil now to add to the keif to try to darken up the final product. This one here reminds me of the blonde hash from days gone bye.
 
GNick55

GNick55

Staff
Supporter
10,776
438
smokedareefer said:
Started with a 17 liter cvault about 2 lbs. Dried it to bone dry on a table, split that into 3 piles and into baggies and into the freezer crunching and breaking up the nugs while in the bag.

Tumbler is the 500 model and holds 500 gms.

So each ach run was about 300 gms of flower. Added 8 quarters to the mix and ran the first batch for about 30 minutes and the other 2 both went a full hour with little difference in appearance.

I'm making some oil now to add to the keif to try to darken up the final product. This one here reminds me of the blonde hash from days gone bye.
Click to expand...
here’s a piece of real moroccan i have.,
6FF9A773 0888 4C50 B33D 339D49F2D0C8
1B02F237 7D68 493D A53D 5771B68C511A
 
GNick55

GNick55

Staff
Supporter
10,776
438
looks the same good job, though have you done the taste test?
with a tumbler you’ll get contaminate i would image? what micron size is the resin collected? does the tumbler separate the heads from contaminate?
could those heads been hand pressed?
sorry for the questions..
i’m making some hand pressed hash later after i’m done making hash oil.
 
smokedareefer

smokedareefer

1,773
263
GNick55 said:
looks the same good job, though have you done the taste test?
with a tumbler you’ll get contaminate i would image? what micron size is the resin collected? does the tumbler separate the heads from contaminate?
could those heads been hand pressed?
sorry for the questions..
i’m making some hand pressed hash later after i’m done making hash oil.
Click to expand...
with a tumbler you’ll get contaminate i would image? Yes theres some but to my eyes.... its good.

what micron size is the resin collected? 145

does the tumbler separate the heads from contaminate? No


could those heads been hand pressed? Yes they could and yes they were.
 
GNick55

GNick55

Staff
Supporter
10,776
438
smokedareefer said:
with a tumbler you’ll get contaminate i would image? Yes theres some but to my eyes.... its good.

what micron size is the resin collected? 145

does the tumbler separate the heads from contaminate? No


could those heads been hand pressed? Yes they could and yes they were.
Click to expand...
thanks.,
i just hand pressed some second grade sift, turned out good enough, taste fine.
bit bigger than a golf ball.
still have the cleaned heads to press
6656355A 4218 4BD3 A37E 72749AE49F57


 
freezeland2

freezeland2

3,421
263
If someone wanted to learn to make hash where would they go research? I love hash but have not seen it in years.
 
You must log in or register to reply here.

Latest posts

Top Bottom