Need a good dehumidifier, send recommendations!

[That_grower21]

I’m here!

 

[JIMKSI64]

Ok. Let's start with basics. Level 10 duct full on. See how the air stream feels outside. And pics.

 

[That_grower21]

Ok. Let's start with basics. Level 10 duct full on. See how the air stream feels outside. And pics.

Good airflow out the duct

 

[That_grower21]

did you get the 3 pictures?

 

[JIMKSI64]

Ok if it is moving good air I am expecting to find one of 2 problems. One is somehow the calibration on the app got messed with. 2nd is a defective sensor. So first one. Do you know how to navigate to the calibration for the sensors?

 

[JIMKSI64]

And do not see pictures in your post

 

[That_grower21]

N

Ok if it is moving good air I am expecting to find one of 2 problems. One is somehow the calibration on the app got messed with. 2nd is a defective sensor. So first one. Do you know how to navigate to the calibration for the sensors?

No clue lol

 

[That_grower21]

Ok if it is moving good air I am expecting to find one of 2 problems. One is somehow the calibration on the app got messed with. 2nd is a defective sensor. So first one. Do you know how to navigate to the calibration for the sensors?

When I turned the fan up the fan goes up in speeds so maybe not the calibration?

 

[JIMKSI64]

When I turned the fan up the fan goes up in speeds so maybe not the calibration?

Ok. Go to main Vivosun screen with temps and settings. Hit the temp number and it goes to record screen. Click 3 buttons upper right takes to another screen. At bottom is calibration. Ensure humidity probe is calibrated to 0 +-

 

[That_grower21]

And do not see pictures in your post

 

[JIMKSI64]

And I see pics and vid cool grow.

 

[JIMKSI64]

Ok. Go to main Vivosun screen with temps and settings. Hit the temp number and it goes to record screen. Click 3 buttons upper right takes to another screen. At bottom is calibration. Ensure humidity probe is calibrated to 0 +-

 

[That_grower21]

It’s all set to 0 and thanks I went all out on my first grow lol

 

[That_grower21]

I thought about opening the bottom vent and put a fan there and blow low humidity air from the lung room into the grow tent

 

[JIMKSI64]

Ok now we check that humidity sensor. From the screen it showed outside 45 inside 56. Open tent and watch humidity. It should drop until the same as outside sensor reading

 

[That_grower21]

Ok now we check that humidity sensor. From the screen it showed outside 45 inside 56. Open tent and watch humidity. It should drop until the same as outside sensor reading

Correct it dropped to 45% exactly

 

[JIMKSI64]

Ok. You need to check your airflow in tent. Ensure the air incoming into the tent through a panel or duct with an insect screen. Can you show a trace of humidity and vdp like this?

let it run and stablize and post.

 

[That_grower21]

Correct it dropped to 45% exactly

Ok now we check that humidity sensor. From the screen it showed outside 45 inside 56. Open tent and watch humidity. It should drop until the same as outside sensor reading

now that my window unit went off it went from 60% humidity to 50%

 

[JIMKSI64]

Where is the incoming air from duct or panel and placement please. Closing in here.

 

[That_grower21]

Where is the incoming air from duct or panel and placement please. Closing in here.

From duct at the bottom right of my tent