S
Stu
- 112
- 16
Hey guys haven't even finish my first grow in my tent in my UC set up, and I already have plans to go bigger.
The build out will consist of two rooms. A 8'x7'8"x8' veg room. It will have a 4x4 tray DTW w/ a 50 gallon rez. Looking to grab a 4' 8 bulb T5 light to provide light for the tray and mothers around the edges. Do you think this will be enough light? For cooling the room will have a small 3,000 btu window AC unit to keep temp and humidity in spec. It Will also have a small humidifier to keep room where it needs to be.
For the flower room it will be roughly 12'x8'x8' space. I Plan to have a 4x8 tray running CoCo in a DTW set up. Looking to have 2000 watts of light in this room. With (2) 8" Mangum XXXL hoods cooled straight from OSA (Out Side Air) in the evening where temps reach 40s-60s year round. It will also have its own 8,000 btu AC unit to keep temp and humidity in spec. Going to be running a Marley tankless water heater for Co2 generation. This will add a good amount of Co2 to the sealed room. As well as having very little heat transferred into the room vs a Co2 Burner.
Below are some pictures of where the veg room will be built. I picked up the lumber and door today and plan frame the walls out by tomorrow if not this weekend. I am going to be using R13 insulation in the walls and for the ceiling. Inside the room I will be using 1/2 Mold resistant dry wall. Commonly used in bathrooms where the humidity reaches high levels.
Alright enough talking here is what it looks like.
stu :joint:
The build out will consist of two rooms. A 8'x7'8"x8' veg room. It will have a 4x4 tray DTW w/ a 50 gallon rez. Looking to grab a 4' 8 bulb T5 light to provide light for the tray and mothers around the edges. Do you think this will be enough light? For cooling the room will have a small 3,000 btu window AC unit to keep temp and humidity in spec. It Will also have a small humidifier to keep room where it needs to be.
For the flower room it will be roughly 12'x8'x8' space. I Plan to have a 4x8 tray running CoCo in a DTW set up. Looking to have 2000 watts of light in this room. With (2) 8" Mangum XXXL hoods cooled straight from OSA (Out Side Air) in the evening where temps reach 40s-60s year round. It will also have its own 8,000 btu AC unit to keep temp and humidity in spec. Going to be running a Marley tankless water heater for Co2 generation. This will add a good amount of Co2 to the sealed room. As well as having very little heat transferred into the room vs a Co2 Burner.
Below are some pictures of where the veg room will be built. I picked up the lumber and door today and plan frame the walls out by tomorrow if not this weekend. I am going to be using R13 insulation in the walls and for the ceiling. Inside the room I will be using 1/2 Mold resistant dry wall. Commonly used in bathrooms where the humidity reaches high levels.
Alright enough talking here is what it looks like.
stu :joint: