Trustfall
Supporter
- 5,516
- 313
How much area does this setup cover?If anyone cares the diy cost to build as it stands is 685$. Including digital multimeter displays and external potentiometers, frame... everything. 375w of 2700k+300w of 3000k+100w of red=775w from the wall of precision grow lightingthat’s .88$ a watt
Beautiful plants.Almost 10 weeks of flower
Vanilla kush
View attachment 928708
View attachment 928709
View attachment 928710
Mazar I Sharif
View attachment 928711
How much area does this setup cover?
This is the same as the info in ed rosenthals book from the 90’s.
And i wish these companies would stop “exagerating” by saying 17%. If the strain was 20% its gain was 3.5%. 23.5% total for example.
Still excellent info thanks!
Isn't 17% of 20% 3.4%? so 23.4% is a 17% gain? That seems significant
yes please do that's the same controller I got/ well that maybe a cheaper one 7-10 but it's the same thc-1000 ... I ended up buy the ink birbs for 15 not 7$$$$ but anyways Please put up a Post...Update: so I modded the Presto unit with pretty good results. I did get a HerbsNow unit for reference when testing. If there are interest I can start a DIY thread......
The HerbsNow unit is pretty nice, and the trays are, much nicer since the middle pops out......
The Presto works but the mod required some rewiring to accommodate the new controller.....depending on the users skill level it may not be feasible.....its a AC circuit...stats below.
HerbsNow uses 500 watts of power and the Presto unit uses 750 watts of power.
I removed the Presto controller completely and replaced with a STC-1000 controller. With some additional modding you could get the controller to mount flush. In the pics, I just secured the controller for testing.
The STC1000 offers a nice set of programming parameters....two relays allow for separate controls to the fan and heating element.
I dialed back the Presto unit to as low as 72F and didn't really see a need to go any lower.....
I like please post your DIy and link hereUpdate: so I modded the Presto unit with pretty good results. I did get a HerbsNow unit for reference when testing. If there are interest I can start a DIY thread......
The HerbsNow unit is pretty nice, and the trays are, much nicer since the middle pops out......
The Presto works but the mod required some rewiring to accommodate the new controller.....depending on the users skill level it may not be feasible.....its a AC circuit...stats below.
HerbsNow uses 500 watts of power and the Presto unit uses 750 watts of power.
I removed the Presto controller completely and replaced with a STC-1000 controller. With some additional modding you could get the controller to mount flush. In the pics, I just secured the controller for testing.
The STC1000 offers a nice set of programming parameters....two relays allow for separate controls to the fan and heating element.
I dialed back the Presto unit to as low as 72F and didn't really see a need to go any lower.....
I like please post your DIy and link here
I signed on here, just to follow you. And to read yr back log, try to learn as much as possible!Yes I’ll post some links
So how’d she finish? How many weeks?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?