THCFarmer.com
121,257 Members Log In Register
Log In Register

Rapid rooter and watering auto...

  • Thread starter Thread starter Irishguy83
  • Start date Start date
  • Tagged users Tagged users None

Rapid rooter and watering auto...

Irishguy83 646 Replies 65,742 Views
Page 21 of 33 · Replies 401–420 of 647
#401
Aqua Man said:
I wouldn't go over 500ppm she is well fed so don't risk over feeding.... Even then she may do better @ 400-450.
Click to expand...
I dont want to go over 578ppm that's the highest but that was res change day and no been staying. Pretty much in that range I have a gal of mix and a gallon just to add water so I am watching it..... after this give me about 30 to 45 mins and I'll go take care of my girl and take pics for you all and Happy Thanksgiving to you all..... with much respect.....
 
#402
The flowers are a few sites that make it from no flower to wow how many..... I counted 12 bud sites..... more pictures tomorrow
 
#403
Ok so today ppm 478..... ph 5.83..... room temp75f RH 50% she is 22" tall and 32" wide.... @ 18" from light
20191128 200500
20191128 200419
20191128 200411
20191128 200335
20191128 111107
 
#409
Irishguy83 said:
She has been doing great within the 400 to 480 ppm
Click to expand...
Awesome... You taking notes of ppm and light and stuff for next time right? That way you have a very good idea of what you need to do and when. Then all you need is minor tweeking for different strains.
 
#411
Aqua Man said:
Awesome... You taking notes of ppm and light and stuff for next time right? That way you have a very good idea of what you need to do and when. Then all you need is minor tweeking for different strains.
Click to expand...
Yes I have a note book I've been putting everything in and then I have this grow diary...
 
#413
Irishguy83 said:
No altogether what do I need to get I know I need plant yoyos with ratchets, and hanging dry bags..... but how do I cure..... I'm baffled...
Click to expand...

That question has more answers than I can shake a stick at and I have tried a few that worked in the past but starting to get it dialed in a bit better.... it will change a bit depending on bud size and structure. But here is how I do it now.

I keep my room in the low to mid 60's humidity at about 60% now you need good airflow to make sure you avoid mold. Mold favirs temps in between 50-70f and humidity over 50% in still air. So as you can see with those parameters good air circulation will be key. You do not want direct airflow on the buds just good circulation so that you avoid any stagnant areas. It should take about 10-14 days to properly dry before you can jar/bag it to start curing. Stems should snap and bud should be kinda crispy on the outside but bounce back when squeezed. Then I use an airtight light proof tote. You can use mason jars zips... Whatever ya like. I have a few mason jars I use for myself and the rest goes into a tote until it's stable at 62% RH in the tote for a few days without burping. I use a hygrometer to check this and depending how moist it is to start with you may have to burp several times a day. I try to keep humidity under 68 at all times and burp as often as I have to so I can. After it's stable I zip it removing as much as possible and thats it.

I'm not claiming this is the best method... It's just what I find works for me.
 
#414
Yoyo you may need and may not. You don't need anything special to hang them. Simple coat hangers or homade clothes line works well.

The dry method I used it is for hanging stems... I would not use a dry basket or screens with stems. If your going to wet trim and clip buds off to dry then a screen/basket will work. If you do that in the stems it will flatten one side of the buds. If you cut them off you can kinda rotate them here and there to prevent that.
 
#416
Just beautiful today and I'm very proud.... shes 23" tall and 32" wide...... is 77f @ RH 50%..... been watching my lights but I'm trying to figure this window starting to buy parts now..... ppm were at 300 something added half mix and then just water which left me with a ppm of 403. Ph was up to 6.3 and took it to 5.79.... here's the pics...
20191129 123515
20191129 123443
20191129 123500
20191129 123523
20191129 123535
20191129 123550
20191129 123612
20191129 123634
 

Attachments

  • 20191129_123403.jpg
    20191129_123403.jpg
    130.7 KB · Views: 39
  • 20191129_123443.jpg
    20191129_123443.jpg
    145.1 KB · Views: 36
#417
Irishguy83 said:
Just beautiful today and I'm very proud.... shes 23" tall and 32" wide...... is 77f @ RH 50%..... been watching my lights but I'm trying to figure this window starting to buy parts now..... ppm were at 300 something added half mix and then just water which left me with a ppm of 403. Ph was up to 6.3 and took it to 5.79.... here's the pics...View attachment 915501View attachment 915502View attachment 915503View attachment 915504View attachment 915505View attachment 915506View attachment 915507View attachment 915508
Click to expand...
She is picture perfect brother 👍👍
 
#418
Shes doing great 27" tall 42" wide 18" from light ahe tends to like the light 20 or 22" from her....... ppm 440 74f RH 51%....... I'm having the hardest time picking which one that's matches the one that has baffle inside..... but she is going good and I got 25 gal of water so I have enough to do 2 really change a week and not need to go back to walmart for awhile but I. Water is purified several different and I get it at 39 cents a gal.......
 
#419
Irishguy83 said:
Shes doing great 27" tall 42" wide 18" from light ahe tends to like the light 20 or 22" from her....... ppm 440 74f RH 51%....... I'm having the hardest time picking which one that's matches the one that has baffle inside..... but she is going good and I got 25 gal of water so I have enough to do 2 really change a week and not need to go back to walmart for awhile but I. Water is purified several different and I get it at 39 cents a gal.......
Click to expand...
Dude you have done an amazing job I think it's safe to say any grower here would be proud of a healthy plant like that. I know I would. I'm pumped to see the yield.
 
#420
Aqua Man said:
Dude you have done an amazing job I think it's safe to say any grower here would be proud of a healthy plant like that. I know I would. I'm pumped to see the yield.
Click to expand...
Aquaman I have the cash to buy a window venting kit due to there cheap buy will the slim ones that are oblong take that one I liked with the baffle built in work and if so what window venting kit would it fit?
 
Page 21 of 33 · Replies 401–420 of 647
Back
Top Bottom