Scraping your collection vessel

StonedPngwin · Sep 2, 2014

So what do you guys all do in regards to scraping your collection dishes after your purge? I'm coming to find the most time consuming and annoying step of a run is actually collecting the oil from my Pyrex (which should be the most rewarding step lol). I let my oil get to a maximum of 120 f and I find it extremely tacky (obvs) and difficult to collect. I end up going through about four razor blades each run. Currently, I just scrape my dish with a utility razor blade, or blades lol, then attempt to get it onto my slick pad before it cools and hardens. I'm having to heat and clean my blades after each scrape and it's just so time consuming I'm looking for other ideas. I know if I get my temp up around 130 it becomes much more of a liquid hence easier to scrape, but I've always heard you never want to get above 120. Any ideas are appreciated! Thanks guys.

LittleDabbie · Sep 2, 2014

Same as your doing.. I swear i need to own stock in #9 Razor blades :\

Takes me like 5-10 depending on amount of oil but I use a round dish instead of square i found its alot faster to scrape those up.. It is one of the things i hate and one of the reasons im not running the rest of the flowers i got atm lol

Ambre · Sep 2, 2014

Try freezing the Pyrex dish of oil before you scrape. This solidifies the oil & makes it easier to work with (less gooey). I've found that some varieties of cannabis give a more solid oil than others do, so experiment - simply refrigerating the Pyrex may be all you need.

Dunge · Sep 2, 2014

I had a Pyrex pie plate disintegrate into shards while scraping.
Very exciting.

LittleDabbie · Sep 2, 2014

^^ damn! Ive broken razor blades scraping but never broken my actual bowl i use.. Careful!

straincreation · Sep 2, 2014

He says very exciting. Lmfao. ^^^

Tuku · Sep 3, 2014

I hear the shards of glass make the BHO more potent. ;)

:D

Capulator · Sep 5, 2014

Bump.

I was just going to ask this question also. Scraping is retarded.

Currently I am using 2 paint scrapers, and as @Amber said freezing it makes it a lot easier to scrape, but it also fragments it and if you don't do it inside of a large box preferably out on a lawn or something you will get tiny pieces of sticky everywhere.

germinator · Sep 5, 2014

My 02. I purge on oil slick PTFE because I scrape before purging.

StonedPngwin · Sep 5, 2014

Yea but how do you get it onto your slick pad lol, your completely skipping over the entire point of this post

germinator · Sep 5, 2014

StonedPngwin said:
Yea but how do you get it onto your slick pad lol, your completely skipping over the entire point of this post

My product is more stable half hour after being blown, I then scrape and transfer to slick pad. I only use two blades and its a breeze.

stickyfing3rs · Sep 5, 2014

I'd really like to make a collection vessel with a perfectly flat bottom that is removable. Getting into the corners is the biggest pain in the ass imo

Capulator · Sep 5, 2014

stickyfing3rs said:
I'd really like to make a collection vessel with a perfectly flat bottom that is removable. Getting into the corners is the biggest pain in the ass imo

EXACTLY. I was just thinking about this.

StonedPngwin · Sep 5, 2014

germinator said:
My product is more stable half hour after being blown, I then scrape and transfer to slick pad. I only use two blades and its a breeze.

So you've somehow produced bho that isn't sticky? How hot are you getting your oil during your liquid evap?

stickyfing3rs · Sep 6, 2014

Capulator said:
EXACTLY. I was just thinking about this.

Check out tri clover fittings cap, they got everything we'd need. Although I'm sure @Graywolf has it all figured out.

stickyfing3rs · Sep 6, 2014

https://www.thcfarmer.com/community/threads/my-tamasium-clone.58585/
Knew I saw one round here somewhere.

germinator · Sep 6, 2014

StonedPngwin said:
So you've somehow produced bho that isn't sticky? How hot are you getting your oil during your liquid evap?

It's sticky but not as tacky after a half hour and for me easier to work with......
I vac purge at 100..manage my muffin...I prefer a chunk of shatter as my end product.
Definitely hit skunk farm research.

StonedPngwin · Sep 6, 2014

germinator said:
It's sticky but not as tacky after a half hour and for me easier to work with......
I vac purge at 100..manage my muffin...I prefer a chunk of shatter as my end product.
Definitely hit skunk farm research.

Lol once again your glazing over what's actually being asked...... How hot do you get it during your liquid evap, not your purge. If your roasting the shit out of it, then yea it'll be really easy to get out of your collection dish.

germinator · Sep 6, 2014

My water bath is at room temp.
"Roasting the shit out of it" won't make a shatter.
It will actually become more and more decarbed and unstable and difficult to handle. Heat is my enemy here.

You can try it or not. I don't care.
Peace out

StonedPngwin · Sep 6, 2014

germinator said:
My water bath is at room temp.
"Roasting the shit out of it" won't make a shatter.
It will actually become more and more decarbed and unstable and difficult to handle. Heat is my enemy here.

You can try it or not. I don't care.
Peace out

Try what lol you haven't given any ideas.... You've literally ignored the post topic in every comment you've made and went into your own tangent. For some reason your bho is magical and different than everrrrrrryone else's.

Scraping your collection vessel

Scraping your collection vessel

StonedPngwin

LittleDabbie

Ambre

Dunge

LittleDabbie

straincreation

Tuku

Capulator

likes to smell trees.

germinator

StonedPngwin

germinator

stickyfing3rs

Capulator

likes to smell trees.

StonedPngwin

stickyfing3rs

stickyfing3rs

germinator

StonedPngwin

germinator

StonedPngwin

Scraping your collection vessel

Scraping your collection vessel

StonedPngwin

LittleDabbie

Ambre

Dunge

LittleDabbie

straincreation

Tuku

Capulator

likes to smell trees.

germinator

StonedPngwin

germinator

stickyfing3rs

Capulator

likes to smell trees.

StonedPngwin

stickyfing3rs

stickyfing3rs

germinator

StonedPngwin

germinator

StonedPngwin

Privacy & Transparency

Privacy & Transparency