Resinable
- 147
- 28
So as the thread title suggests I'm having problems with a new sealed room. Every new healthy plant I bring into this room goes down hill fast; the leaves turn pail, rust, and yellow from the outside in. The roots look relatively healthy. I believe I may be dealing with some sort of off gassing issue (but I'm not 100% sure). I am trying to narrow down a possible source so I can remove it; changing this room to a fresh air recirculator posses many problems.
Background: new room, new location; totally sealed room with Co2 burners (propane) and Mitsubishi mini splits. Floor is concrete with pond liner. We built the walls and ceiling with plywood and covered them with reflectix insulation and taped with reflectix tape. I was running a hydroffogger; first using tap water and then switched to AC condensate and recently I've turned it off (no difference either way). I had panda plastic up but tore it down. I have a water line made of pvc in the room. I have some outdoor type semi hard 1/2 irrigation line (for AC condensate) in the room. This room is very well sealed with no air intake or outake fans. I've run sealed rooms with great success in the past. Temps, PH, nutrients and EC are dialed. Medium is coco/perlite. I am starting suspect the reflectix could be the problem.
Anybody have similar issues in the past? Any constructive thoughts or questions would be most welcome.
Background: new room, new location; totally sealed room with Co2 burners (propane) and Mitsubishi mini splits. Floor is concrete with pond liner. We built the walls and ceiling with plywood and covered them with reflectix insulation and taped with reflectix tape. I was running a hydroffogger; first using tap water and then switched to AC condensate and recently I've turned it off (no difference either way). I had panda plastic up but tore it down. I have a water line made of pvc in the room. I have some outdoor type semi hard 1/2 irrigation line (for AC condensate) in the room. This room is very well sealed with no air intake or outake fans. I've run sealed rooms with great success in the past. Temps, PH, nutrients and EC are dialed. Medium is coco/perlite. I am starting suspect the reflectix could be the problem.
Anybody have similar issues in the past? Any constructive thoughts or questions would be most welcome.