THCFarmer.com
121,130 Members Log In Register
Log In Register

Sixstrings Led Cob Builds

  • Thread starter Thread starter sixstring
  • Start date Start date
  • Tagged users Tagged users None

Sixstrings Led Cob Builds

sixstring 1,139 Replies 221,508 Views
Page 26 of 57 · Replies 501–520 of 1,140
#501
Thanks House I'm lookin forward to it.
Fatawa I've got $800 in invested
Thanks Six String it's been a lot of fun doin this project. I whish I knew more about how much light there is available to the plants and if driving the COBs at a higher amperage would be of benefit. There are COBs that run 75 volts @ 3.4 A but there is a point of diminishing returns and Growmau5's explanation of how much light is too much was over my head.
 
#502
Harley09 said:
there is a point of diminishing returns
Click to expand...

This is exactly what I'm mentally wrestling with... My system is exactly like yours except I'm running another 6 COBs in a 4x8 tent. I would love to make strategic changes without wasting a ton of money on equipment and energy costs. My last run is going to come in at roughly 2 pounds from 6 plants(I'll know the exact figure next week)... can I up that number by simply adding/enhancing the lighting ... I don't know...
 
#505
Harley09 said:
I suppose I could watch his video on how much light is the max amount you need. I may have to watch it 20 times (I'm a slow learner) . 18 lights at 50 watts = 900 watts 2 lbs is 907 grams so just over 1 gram per watt that's pretty good!
Click to expand...

yeah, I'm pretty happy with the 1g/watt, thanks. I'm very curious about the final numbers, I have the one white widow in one drying tent that I'll do a final trim/into jar tonight. I have the 3 blueberries in the bloom tent drying that may need an extra day or two. The blueberry buds were super heavy and dense when I hung them on Saturday.
 
#507
leamon said:
Can a driver use six chips? So what's the power of 6 cob?
Click to expand...
Here's an example of 2 drivers below.
One has a higher DC output voltage, but lower 1.4A current.
You can run more COBs, but at a reduced current.
If you bump it up to the HLG-480 series (Output Voltage (DC) :171-343V @1.4A)
then you can have 5-9 COBs on a circuit



HLG-320H-C1400B DRIVER:
Output Voltage (DC) :
114-229V (4-6 X 36V COBs )
Max Output Current :
1400mA

HLG-320H-C2100B DRIVER
Output Voltage (DC) :
76-152V (~2-4 X 36V COBs )
Max Output Current :
2100mA
 
#508
I'm going to redo my light in a couple weeks, adding a 4th 50watt COB because I have some overhead left in the Driver for 200 watts (4x 36v [email protected])

Next phase is to swap out the 1.4a driver for a 2.1a driver, getting 302w from the same setup, and moving the old driver to a new 2- cob ,(70 [email protected] ) light, getting 200 watts output also.
 
#509
Grape dosi under crees
20170912 181551
20170912 181542
20170912 181522
20170912 181508
 
#515
leamon said:
If I want to make a 400w cob, what materials do I need to buy and what cob chip is good for 0
Click to expand...
"and what cob chip is good for 0" i dont understand this part of your question
some kit options to get to 400w ,two of these.
or 1 of these
or just get this http://timbergrowlights.com/model-4vs/
or 2 of these

or you can source all the parts here based on any of those kits and make it yourself
 
#517
Six do you use leds in veg also?
One of these days I will have to get educated on the leds. Looks like a lot to learn. Not like I won't have time in the near futcher lol. Looks like a good winter project for me.
 
#518
still using 90% t5 in veg,i do have a vero fixture in veg that kicks ass @ 100w but i havent had time to build more fixtures.
 
Page 26 of 57 · Replies 501–520 of 1,140
Back
Top Bottom