Super Skunk Autos Stunted Seedlings

[heisen]

I think they will look good in a week,dont sweat the stunted one.

 

[heisen]

Yeah I was thinking it was high as well... I will watch them very closely over the next 36hrs if I see any adverse reactions I'll dilute the dilution.... So far so good. Just thinking they could use a little growth boost but remembered they are just 18-21 days old.
Does my plants look small it hard to tell since each is 2-3 days age difference... Will make sure I keep better notes on these things moving forward...

Your notes are in your journals,only reason I ran journals on this forum,easy to go back and cross reference.i include all details.get yourself a dry erase board for your room with a calender.write everything down.

 

[Ashephard]

Todays Pics
Added more frozen water bottle on the outside of the Res for temp reduction and humidity. Added my 2 2FT T5 HOs to my setup as supplemental lights. So now im running those plus a 600W MH bulb. Had to make some heat adjustment saw some slight cupping and finger crossing after the temps got up to 93 or so...
Decided to leave the Cab open to lower temps...Untill I dail in the temps of this new setup.

 

[Ashephard]

Yeah Im made some adjustment and they seem to be happy. Has grow. Alot in a couple days.
PPM 490(Still high) reduced PH to 5.9.
Root production has really taking off... Roots were kinda bald before... They are really long some over 1ft...

Also added 2 2ft T5 HO supplemental lights as well. And frozen water bottle on the outside of help with both ambiment temps and added humidity...

Lots of new side brancing and leaves popping up in random places on each of the nodes..
Still cant seem to get the humidity over 45%
Also had a heat wave and my temps were up to 93 degrees. Saw some leafing cupping... Seemed short lived onced I cooled everything off hopefully no permanent damage notices some crumpled up on the youngest and even the stunted one (Which is was producing beautiful new grow) tooks some damage... My AC was off.for about am hour and the temps took off. My electric bill will be high. Can only turn AC off during off light hours.
Plant age varies from 21 to 18 days. So my PPM are a little high for autos... Havent noticed any adverse reaction. Other then they didnt seem to respond to high temps as well as when the PPMs were lower. 93 temps didnt cause cupping before. And the honestly dont look quite as "happy" No drooping of burning but I did see the edges look at little raised and crisscrossey slightly... Idk maybe its my imagination... Take a look at the pics...

 

[Ashephard]

I think they will look good in a week,dont sweat the stunted one.

You were right about the stunted one it started producing some beautiful top growth... The bottom leaves took some damage after a heat wave... They didnt respone as well as when it hit 90s with lower PPMs.
Thinking if doing a Res change...
This may sound like a dump question... But what do I do with the plants while im changing the Res... Leave them in there?

Im thinking I spray the plants and medium really well kinda soak them then just completely drain the system... Will 20 mins without air or solution cause them stress?

 

[heisen]

You were right about the stunted one it started producing some beautiful top growth... The bottom leaves took some damage after a heat wave... They didnt respone as well as when it hit 90s with lower PPMs.
Thinking if doing a Res change...
This may sound like a dump question... But what do I do with the plants while im changing the Res...

Im thinking I spray the plants and medium really well kinda soak them then just completely drain the system... Will 20 mins without air or solution cause them stress?

Dont spray the roots with nothing.

Leave them in there.Turn the lights off,plants shut off when the lights are off.use a small light away from the plants when you do a change.the roots will love the oxyegen hanging in the air.leave them inside the tote though so the roots don't dry out.

 

[Ashephard]

Todays Pics

 

[heisen]

Looking better

 

[Ashephard]

Looking better

Help I broke one of my leaves coming out of the top trying to spread it open a bit... The stem is too tiny to tape and is the cut it right on the node... The leaf is dying what should I do?

 

[heisen]

It's a leaf man,you need to leave them plants alone for a week.the less you stress and micromanage your plants the better they will be.just remove that broken leaf and move on.plant will be fine.

 

[Ashephard]

Todays Pics
Change the Res today
PH is 6.0 PPM is 550 (High But will stay in this rangw for 2 weeka)
Added extra Hydrogaurd noticed what I think are stained roots. Hope so...
Not sure how it could be root rot. Res temps are good. No light leak. Bene Bac since week 1.
Will watch closely over next week or so for any adverse reaction.
Making andl effort only check PPM and PH daily and only make changes if necessary.
So far this grow has tested my patience. Seems the best quality you can have an gardener...
Check out the pics.

 

[Ashephard]

Help

It's a leaf man,you need to leave them plants alone for a week.the less you stress and micromanage your plants the better they will be.just remove that broken leaf and move on.plant will be fine.

Help my plants are showing brown spots everywhere on lower leaves what is this?

 

[heisen]

Either calcium or nutrient burn.looks more.like calcium on the older leaves.run calmag in your reds at 2 - 4 ml per gallon.it won't fix the leaves but will stop the problem.

 

[Ashephard]

Either calcium or nutrient burn.looks more.like calcium on the older leaves.run calmag in your reds at 2 - 4 ml per gallon.it won't fix the leaves but will stop the problem.

Ive beem running Cal Mag at 25 ML in my res... Could I have 2 much cal mag as im sure my tap has some as well...

 

[Ashephard]

Nute burn is also possible my Res is running at about 550 PPM had lower PH again today to about 5.75

 

[Ashephard]

Ive beem running Cal Mag at 25 ML in my res... Could I have 2 much cal mag as im sure my tap has some as well...

My Res has about 18 Gals in it maybe I didnt add enough Cal Mag

 

[heisen]

My Res has about 18 Gals in it maybe I didn't add enough Cal Mag

no your not even close.Your plants are starting to perspire and grow so they will show deficiencies especially if your giving them good light.18 gallon res you need at least 60ML of calmag in there.

 

[Ashephard]

no your not even close.Your plants are starting to perspire and grow so they will show deficiencies especially if your giving them good light.18 gallon res you need at least 60ML of calmag in there.

Well I did spray the leaves with water with the lights on... I thought maybe it was burns from that...
How do I know if it's from spray or lack of calcium?

 

[Durksta]

Well I did spray the leaves with water with the lights on... I thought maybe it was burns from that...
How do I know if it's from spray or lack of calcium?

I read your d’outil good luck to you I did an amnisia in auto hydro for my first hydro grow I got her to the end now I’ve started with 2 critical +2 which are 3 1/2 weeks old and one super skunk auto and a purple bud auto which are 2 weeks old. Had problems germinating 2 super skunk so had only one super and one purple but to fill my tubs. I have a thread for’my First grow which had a lot of my problems with autos maybe you can find something interesting there that can help. I got 43g dry at the end it could be better but happy for the learning here are some pics of new grow and the auto amnisia I did before

 

[Ashephard]

Reduced the PPMs to 550
PH 6.25
Noticed some reddish stems... More like hair then actually red. K DEF... Also the rust /brown spots are mostly on the lower fan leaves. Stunted plant looks ok... But I feel it was either 2 much nutes or a def.K maybe becuase of red stems idk...