gwheels
- 1,594
- 263
Rip them vent covers off and stick them insideI have fixed things up in my small tent
20 x 36 x 62 inch tent
4 inch canfilter with fan and veriac controller usually running at 1/4 power. The filter is now hanging so I have full room.
135 watt 4k quantum board currently running 80 watts to get stuff started.
light and fan and clip fan all running is 115 watts (just under 1 amp).
Ready for seed drop later in the summer. :)
Rip them vent covers off and stick them inside
The vents in the tent are made for a negative pressure grow and for some reason instead of inside 1 way flaps the jackasses started putting them on the outside and they are shut off flaps.How and why,I run tents so what am I missing?
The vents in the tent are made for a negative pressure grow and for some reason instead of inside 1 way flaps the jackasses started putting them on the outside and they are shut off flaps.
The original(more than 10 years ago) sun hut silver was set up perfect ...vents and ports but the zippers failed at 5 years.
Can’t answer what you’re missing, but I’ll share what I do.How and why,I run tents so what am I missing?
Nope lol,my question was directed towards gt21's comment on removing flaps and placing them on the inside of tent rather than the outside.Can’t answer what you’re missing, but I’ll share what I do.
First off it was closer to 3lbs 6oz, second, that’s my best. Most are closer to 2.5.
I run a large tent with lots of light using ebb and flow doing scrog grows with known high yield strains. Takes 6 or 7 weeks to fill the screen, 65 days in flower with lights as close as I can using large air cooled hoods.
I feed 3x every twelve hrs, have no nute problems, and no bugs, and keep temps under 80 in daytime, 72 at night. I get great airflow, so I don’t use CO2.
I use floranova line of nutes plus a product called Mammoth P, for good scientifically engineered microbes.
Plus forty years of time.
My soil grows are under 2lbs, but amazing quality.
Hope this helps.
RR1
Sorry, my flaps are on the inside where they belong. Love my yieldlabs tent. Nice design.Nope lol,my question was directed towards gt21's comment on removing flaps and placing them on the inside of tent rather than the outside.
Must be an old one cuz all the tents I've seen including yield labs have outside vent flap,I still don't understand what difference it makes,open is open and closed is closed...Sorry, my flaps are on the inside where they belong. Love my yieldlabs tent. Nice design.
RR1
Having on the inside is better for me because I pull huge amounts of air through my tent. Flaps on the inside permit air in, and when blower goes off the flaps drop back to closed.Must be an old one cuz all the tents I've seen including yield labs have outside vent flap,I still don't understand what difference it makes,open is open and closed is closed...
I get you now,my exhaust blower runs nonstop so they wouldnt close at all on mine anyways lol.Having on the inside is better for me because I pull huge amounts of air through my tent. Flaps on the inside permit air in, and when blower goes off the flaps drop back to closed.
RR1
Its actually a bit odd... Some inside...some out. Both are technically supposed to be used the same way unless you're gassin.Sorry, my flaps are on the inside where they belong. Love my yieldlabs tent. Nice design.
RR1
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?