UnderDawg Numero Uno

mittenmedgrow · Jan 18, 2011

Plants are looking good. I wouldnt reveg unless you have to.

winta · Jan 18, 2011

mitten aint tellin u no lies bro cut now or forever hold your piece unless u reveggin ;)

mittenmedgrow said:
Hey andy cut them clones now. The furter they get into flower its going to confuse them.

mittenmedgrow said:
Plants are looking good. I wouldnt reveg unless you have to.

Shady · Jan 18, 2011

Good job brah! I'm excited to see the bad ass females lift up their skirts and get pretty for the show... :makeup

sticky icky · Jan 18, 2011

Wazzup Playa lookin real good bro wish I new about the thread earlier would've been poppin in real nice fat ass dark leaves bro can't wait to see these poppin gonna be some fire dawg!

andy107 · Jan 18, 2011

mittenmedgrow said:
Plants are looking good. I wouldnt reveg unless you have to.

Thanks bro, ill be sure to take some cuts tomorrow.

winta said:
mitten aint tellin u no lies bro cut now or forever hold your piece unless u reveggin ;)

Ima cut some clones off of em tomorrow dude, any of these lookin like the ones you ran?

Shady said:
Good job brah! I'm excited to see the bad ass females lift up their skirts and get pretty for the show... :makeup

Thanks man, stick around should be some dank on the way!

sticky icky said:
Wazzup Playa lookin real good bro wish I new about the thread earlier would've been poppin in real nice fat ass dark leaves bro can't wait to see these poppin gonna be some fire dawg!

its all good man, better late than never! thanks for droppin in!

winta · Jan 19, 2011

yea your female, #3 and #1 look like the phenos i found! cant wait to see how yours turn out!

andy107 said:
Ima cut some clones off of em tomorrow dude, any of these lookin like the ones you ran?

andy107 · Jan 19, 2011

4 seeds, 4 females nuff said. haha feel like i hit the lotto! I took 1 cut off each plant today and they look pretty stressed (real droopy) but im hoping they will snap out of it in a couple days.

mittenmedgrow · Jan 19, 2011

Cool. The cuts should perk back up. Just keep the humudity and temp up. Is this your first time taking cuts?

andy107 · Jan 19, 2011

mittenmedgrow said:
Cool. The cuts should perk back up. Just keep the humudity and temp up. Is this your first time taking cuts?

it might as well be..this will be the third time ive tried cloning but the first time i tried i drowned them and the second time the temps were too hot..so hopefully ill put it off this time.

mittenmedgrow · Jan 19, 2011

Ya cloning is tricky for some people. Once u figure out what works for you it will be easy. If you want any help let me know.

sticky icky · Jan 19, 2011

Wut up brotha maybe look into pickin up a small site eazy cloner its so easy to deal with no spraying no domes just changin water n cleaning.

andy107 · Jan 19, 2011

seems like their getting worse, is this normal for cuttings to be looking like this?
Temp is 80 F and the humidity is 40% ..i feel like i need to raise my humidity?

mittenmedgrow · Jan 19, 2011

Is your dome fogging up?

Shady · Jan 19, 2011

Word... Your humidity should be over 80% in the dome... Fogged to the point you can't see inside... :cool

andy107 · Jan 19, 2011

mittenmedgrow said:
Is your dome fogging up?

yea it gets foggy when i mist it but it doesnt stay misted/fogged very long.

Shady said:
Word... Your humidity should be over 80% in the dome... Fogged to the point you can't see inside... :cool

any ideas on how i can get my humidity up there? would a warm wrag work?

Shady · Jan 20, 2011

Get a $20 seedling heat mat and add a bed of perlite in the tray with enough water at the bottom to barely touch the bottom of the rapid rooters... I'm about to take some clones soon and will write another shady cloning technique tutorial which I've posted a few times in my journals... :cool

andy107 · Jan 20, 2011

I already have one of those heating mats, but i dont have perlite. would it still work without the perlite?

mittenmedgrow · Jan 20, 2011

Yes, I like the perlite idea but u dont need it. You want just enough water to touch the bottom of the plugs.

Shady · Jan 20, 2011

You don't need the perlite as I've never used it before, but since I started using the heat mat last month, I've discovered that it tends to be too hot and the water will need to be replaced more frequently... Of course this heat differential depends on the room's ambient temps so the perlite should add a buffer to slow down evaporation and reduce too much heat transfer to the clippings. In lieu of the perlite some spacers can be used between the heat mat and tray if it's too hot... In this scenario I would add enough water to fill the grooves on the tray... :thinking

sticky icky · Jan 20, 2011

Hey Andy did you send the mom into 12/12 yet those look history bro you need to take a couple more cuts.

UnderDawg Numero Uno

UnderDawg Numero Uno

mittenmedgrow

winta

Shady

Chillin' in the Shade...

sticky icky

andy107

winta

andy107

Attachments

mittenmedgrow

andy107

mittenmedgrow

sticky icky

andy107

Attachments

mittenmedgrow

Shady

Chillin' in the Shade...

andy107

Shady

Chillin' in the Shade...

andy107

mittenmedgrow

Shady

Chillin' in the Shade...

sticky icky

UnderDawg Numero Uno

UnderDawg Numero Uno

mittenmedgrow

winta

Shady

Chillin' in the Shade...

sticky icky

andy107

winta

andy107

Attachments

mittenmedgrow

andy107

mittenmedgrow

sticky icky

andy107

Attachments

mittenmedgrow

Shady

Chillin' in the Shade...

andy107

Shady

Chillin' in the Shade...

andy107

mittenmedgrow

Shady

Chillin' in the Shade...

sticky icky

Privacy & Transparency

Privacy & Transparency