Water Chilling Q & A

EventHorizan · Nov 15, 2016

Thanks for a Lil explanation...... I'm still getting a chiller tho. Are you familiar with a recirculating water farm is? 8 bucket... Made by GH.? That's what I need to cool...

MendoAdome · Nov 15, 2016

Go with that 1hp commercial unit. How many gallons is in your system

EventHorizan · Nov 15, 2016

20 gal system.

EventHorizan · Nov 15, 2016

EventHorizan said:
20 gal system.

Each bucket holds about 2 1/2 gal... 8 growing buckets and a control bucket and res which sits outside tent.

EventHorizan · Nov 15, 2016

What is your method of growing.. I need to find the rdwc growers thread :)
The only such thread that I seen was the current culture. I don't think my Lil setup will get much attention in that thread unfortunately. Most the ppl I talk to on here grow in coco...

StonedBlue · Nov 15, 2016

MendoAdome said:
And there's not really any way to modulate or control the humidity levels you get stuck with it on or offyou could always just adjust the speed of the fan but the changes are going to be very little especially to 16 kW setup

There was a post earlier that said the temp of the resivor (sp) controlled the rooms dew point and would affect humidity.
I think the temp you set on your chiller is how you set humidity. This is more than just water running through pipes.

timmyTurner · Dec 3, 2016

MendoAdome said:
Go with that 1hp commercial unit. How many gallons is in your system

That's a little overkill for 20 Gal

visajoe1 · Feb 18, 2017

EventHorizan said:
What is your method of growing.. I need to find the rdwc growers thread :)
The only such thread that I seen was the current culture. I don't think my Lil setup will get much attention in that thread unfortunately. Most the ppl I talk to on here grow in coco...

what chiller did you end up with?

EventHorizan · Feb 18, 2017

visajoe1 said:
what chiller did you end up with?

Cold floor in basement keeps water at 64.
I added a aquarium heater to bring it up to 68.
It now stay at 68 to 69.

visajoe1 · Feb 18, 2017

EventHorizan said:
Cold floor in basement keeps water at 64.
I added a aquarium heater to bring it up to 68.
It now stay at 68 to 69.

Ahhh, a cold floor. That is clutch. Mine is at 65.3 right now, want to bump it up to 66.5. Found a $600+ chiller on craigslist last weekend and scooped for $64. I lucked out

Lets420 · May 22, 2017

I wss expe ting to read about using ice eater to ester your plants the last few days of flower to add essential oil production. I almost fell asleep reading this thread. I have slot of new things to try thos batcch when it comes to essential oil production

DemonTrich · Apr 30, 2018

Gonna bring this back from the d e a d vs starting a new thread.

I have a 2.5g cloner I want to mod and use a water chiller to keep water temps under 78*. I only need to drop 3-4* at most.

I have no problems acquiring any fittings, piping, etc.

Thoughts

heisen · Apr 30, 2018

I set up my aero cloner to recirculate water through a chiller .it took them forever to root.i think the warmer the water the better for cuts.
Made me look into pool shock and after that everything went perfect.

DemonTrich · Apr 30, 2018

I have a strain that's a temp bish. 1 of 18 I run have this issue. Aside from just putting them on my cold basement floor last night, chilling the water is needed.

If I didn't like this strain, I would never even bother.

heisen · Apr 30, 2018

Just a bullhead fitting in the bottom with the water sucking out going through a chiller,than a return line back to the tank.or you can use ice bottles if you have the time to sit around and babysit them.

DemonTrich · Apr 30, 2018

My buddy has a spare minute timer thing. I'll try that before dishing out 300 for a chiller. 1 on, 4 off 24/7.

heisen · Apr 30, 2018

Could hook it up to a radiator and have a fan blow air through it.circulate it through the cloner

heisen · Apr 30, 2018

Junk yards have shit tons of old radiators

dan1989 · Apr 30, 2018

I know this thread is years old but I just wanted to say that Google Sketch Up as someone mentioned earlier is complete garbage. If you want decent 3d drawing software get SolidWorks.

DemonTrich · Apr 30, 2018

Timer set as best as I could get it.
52 seconds in, 4:55 seconds off. In the one cloner I swapped the new pump 8n, water temps are 77.1*. In my other 2 with old pumps, 81.1*. I'll solve swapping out all my old pumps as well today.

Water Chilling Q & A

Water Chilling Q & A

EventHorizan

MendoAdome

EventHorizan

EventHorizan

EventHorizan

StonedBlue

Disabled Vet

timmyTurner

visajoe1

EventHorizan

visajoe1

Lets420

DemonTrich

heisen

DemonTrich

heisen

DemonTrich

heisen

heisen

dan1989

DemonTrich

Privacy & Transparency

Privacy & Transparency