waxman
- 78
- 18
Hello everyone,
I thought I would make this thread showing some pictures of some of my processes, equipment and of course concentrates. I would love some feedback, comments, likes and advise, as I am always tying to improve processes and quality.
These pictures are a run from 24 grams of Diesel. My return was 4.78 grams of some great Shat! I did this run for my Dad who has stage 4 Lymphoma. He quit chemo because it was killing him faster. He started using oil and went into remission for a while. It has since came back and again he is using concentrates to self medicate. He is feeling much better. Praise God!
I used a glass tube for this small run with Whip-It Premium as my solvent. I blasted OUTSIDE into a air temp. Pyrex dish. I waited 30min and added 100 degree hot water bath. It took about 35min to evaporate the solvent enough to bring indoors. I let my oil get to 89 degrees and took it out of the hot water bath. I then covered it with plastic wrap and let it sit overnight. The next morning I removed the plastic wrap and put back in to a hot water bath of 90 degrees. I did not let it get over 90 degrees. Removed from hot water bath and let cool down to room temp. Scraped up the oil onto Parchment and put in my 3 gallon Vac chamber with digital heat pad. Started with no heat, I left the muffin alone until it fell on its own. I left it overnight in the chamber. I then started the heat at 95 degrees and slowly raised the heat as necessary. It all depends on the strain that I am working with as to what temps I can achieve without buttering. I never go higher than 120 degrees. Unless I want Butter or Honeycomb. It was in the vac for 22 hrs with heat.
I will be adding more photos and comments as I am able..
Thanks for reading my Thread! Cheers!
I thought I would make this thread showing some pictures of some of my processes, equipment and of course concentrates. I would love some feedback, comments, likes and advise, as I am always tying to improve processes and quality.
These pictures are a run from 24 grams of Diesel. My return was 4.78 grams of some great Shat! I did this run for my Dad who has stage 4 Lymphoma. He quit chemo because it was killing him faster. He started using oil and went into remission for a while. It has since came back and again he is using concentrates to self medicate. He is feeling much better. Praise God!
I used a glass tube for this small run with Whip-It Premium as my solvent. I blasted OUTSIDE into a air temp. Pyrex dish. I waited 30min and added 100 degree hot water bath. It took about 35min to evaporate the solvent enough to bring indoors. I let my oil get to 89 degrees and took it out of the hot water bath. I then covered it with plastic wrap and let it sit overnight. The next morning I removed the plastic wrap and put back in to a hot water bath of 90 degrees. I did not let it get over 90 degrees. Removed from hot water bath and let cool down to room temp. Scraped up the oil onto Parchment and put in my 3 gallon Vac chamber with digital heat pad. Started with no heat, I left the muffin alone until it fell on its own. I left it overnight in the chamber. I then started the heat at 95 degrees and slowly raised the heat as necessary. It all depends on the strain that I am working with as to what temps I can achieve without buttering. I never go higher than 120 degrees. Unless I want Butter or Honeycomb. It was in the vac for 22 hrs with heat.
I will be adding more photos and comments as I am able..
Thanks for reading my Thread! Cheers!