GNick55
- Posts
- 15,506
- Reactions
- 49,702
- Joined
- Jan 11, 2020
- Points
- 438
mmm
etc
mmmYour operation is a little bigger scale than mine.Thanks for all the demonstration. When I get enough kif I'll play around with it and see what I can get out of it. My rosin press looks more like your pollen press. Do they make some type of form that could go in between the rosin plates?
I watched a girl one time take a big nug and press it with her hair straightener and some parchment and got a decent amount of dab out of it!mmmi think i’ve seen something that could be used on the internet, i just get creative, can you control the pressure from nothing to full, as your just trying to press together. what about heat? can you set at 100-150 degrees?..
etc
haha yep, a few things i have no interest in playing with..I watched a girl one time take a big nug and press it with her hair straightener and some parchment and got a decent amount of dab out of it!
YIKES! Had a buddy burn his legs cooking down butane. I told him doing it in his garage was a bad idea, that the fumes are heavier than air and will float around the ground and are flammable but he figured as long as he left the side door open it would be enough ventilation.....Nope! Luckily he didn't burn down his whole house!!!haha yep, a few things i have no interest in playing with..
hair straighter rosin, anything made with butane..
i’m smart with stuff like that as i use isopropyl for lots of things., i just hate products made from using butane..YIKES! Had a buddy burn his legs cooking down butane. I told him doing it in his garage was a bad idea, that the fumes are heavier than air and will float around the ground and are flammable but he figured as long as he left the side door open it would be enough ventilation.....Nope! Luckily he didn't burn down his whole house!!!
Agreed! When I saw how they made dab early on where they'd pack a glass tube with trim and inject butane into the glass tube I decided to stick to flower!!i’m smart with stuff like that as i use isopropyl for lots of things., i just hate products made from using butane..
I can control heat on my rosin press with the digital controls and I can control the heat on my small hand press if I use my sous vide to within a degree. I think my first attemp will be with the hand press with maybe 3g of kif and heat it at 120 or so to soften it and see if it will fuse the kif into a single cyclinder of hashmmmi think i’ve seen something that could be used on the internet, i just get creative, can you control the pressure from nothing to full, as your just trying to press together. what about heat? can you set at 100-150 degrees?..
etc
I think this is how Rosin presses started.I watched a girl one time take a big nug and press it with her hair straightener and some parchment and got a decent amount of dab out of it!
i think you could use this in your press to press the resin into hash.. id heating this thing up in hot boiling water, dry off, put on your rosin press or even and vice and just learn how to press it into hash instead of rosin. i wouldn’t heat up the rosin press though..I can control heat on my rosin press with the digital controls and I can control the heat on my small hand press if I use my sous vide to within a degree. I think my first attemp will be with the hand press with maybe 3g of kif and heat it at 120 or so to soften it and see if it will fuse the kif into a single cyclinder of hash
@GNick55 what is your preferred method of treatment for pressed rosin. I like it a lot but it’s so damn sticky and hard to work with.i think you could use this in your press to press the resin into hash.. id heating this thing up in hot boiling water, dry off, put on your rosin press or even and vice and just learn how to press it into hash instead of rosin. i wouldn’t heat up the rosin press though..View attachment 1291407
i love rosin. each strain is different , it all depends on strain/moisture/temp. I made rosin since 2015 seen it on yt started with hair straightner , went to grinded up big square nose plyers. some return gooey had some brittle etc.@ preferred method of treatment for pressed rosin. I like it a lot but it’s so damn sticky and hard to work with.
.
i love rosin. each strain is different , it all depends on strain/moisture/temp. I made rosin since 2015 seen it on yt started with hair straightner , went to grinded up big square nose plyers. some return gooey had some brittle etc.
sometime I pressed really low temp and then put it in a mini oven to like 50c and leave it for like 1h or more but always kept an eye on jt and it would change to a dry soft crumble that looked and felt like full melt gold hash.
traditional hash making Afghanistan.Definitely that part is new to me. I just see the nice bud you grow. How can I make my own hash? I have a pollen press. Is there anything else that needs to be done to it to make it like the old Lebanese gold?
Yes . It looks like they work it so much to bust the trichromes,I never did that making home hash so I'm going to try working it more and maybe in a frying pan and see what happens.Was that water they poured on it at the start. More like kif play dough. Which makes sense for the texture I remember.
The hard part for me is getting that much kif.Yes . It looks like they work it so much to bust the trichromes,I never did that making home hash so I'm going to try working it more and maybe in a frying pan and see what happens.
that video has been posted a few times, yes it’s is water.The hard part for me is getting that much kif.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?