L
lunchbox421
- 14
- 1
Hello all. Let me start by saying thank you to all for the wonderful knowledge dispensed here at the farm :sun Been on all the sites, but this one I find to be very informative and mellow, which I prefer. I recently joined, but have been lurking for quite some time.
I'm setting something up and want to know from others' experiences if it will work, if not what would be a better alternative.
I have a 14wx20lx10h sealed room to work with. There will be 4 4x8 tables. I'll either run 2 per wall, or together on frames with wheels we're I could separate them to get between the ladies (16ft of tables on each wall long ways, or together down the middle). I'll be running a c02 gen and am working out the details on the ac (window/split system). I would like to run 8 8" xxxls, 4 inline over each length of tables.
-->l==+=+=+=+==lO-->
-->l==+=+=+=+==lO-->
Or depending on setup, one strip per wall length wise.
Would running 10" ducting and a 10" max fan (1023cfms) (Possibly, and if necessary, a 10" inline duct fan(900cfms) in front and in between the 2nd and 3rd lights) sufficiently cool the lights down to be able to drop the lights and avoid bleaching? Also I want to keep it simple.
This room is inside another bigger room and it typically gets as warm a typical so cal (not by the beach :sad0047:) room/house/place would, anywhere from 60's to 90's although the lights would be running at night.
Thanks for any input, it is truly appreciated. :)
I'm setting something up and want to know from others' experiences if it will work, if not what would be a better alternative.
I have a 14wx20lx10h sealed room to work with. There will be 4 4x8 tables. I'll either run 2 per wall, or together on frames with wheels we're I could separate them to get between the ladies (16ft of tables on each wall long ways, or together down the middle). I'll be running a c02 gen and am working out the details on the ac (window/split system). I would like to run 8 8" xxxls, 4 inline over each length of tables.
-->l==+=+=+=+==lO-->
-->l==+=+=+=+==lO-->
Or depending on setup, one strip per wall length wise.
Would running 10" ducting and a 10" max fan (1023cfms) (Possibly, and if necessary, a 10" inline duct fan(900cfms) in front and in between the 2nd and 3rd lights) sufficiently cool the lights down to be able to drop the lights and avoid bleaching? Also I want to keep it simple.
This room is inside another bigger room and it typically gets as warm a typical so cal (not by the beach :sad0047:) room/house/place would, anywhere from 60's to 90's although the lights would be running at night.
Thanks for any input, it is truly appreciated. :)