Mars Hydro Led Grow Light Family

[MarsG]

Hi Riden2low,

Thanks for your feedback, I have sent you a PM about how to set the remote, please have a look :)

These 2 videos maybe can help you out, one is from Medgrower1, another is from Mr. Tight. Both of them are using the same program as yours.

Please let me know if the 2 videos can help you!

Our company will make a video about how to set remote as soon as possible, sorry for the confusion this remote issue had given you .

Best Regards,

Hi Riden2low,

I have just called our factory, and feedback to him your questions.

When you press AUTO, M0,M1 or M2, the remote is with setting mode, that's why it was showing "TIME" after you pressed AUTO, so, after setting, if you want to use AUTO, M0, M1 or M2 mode, you need to press OK for sending the data to light, and the remote will be back to the main screen. Next time, if you press AUTO, M0,M1,or M2 again, and without pressing OK, the remote will stay at the setting mode again, so all the programs you have set before will not work in the following hours, the remote will stay at the present state forever.

So everytime when you need to use a mode you want, please remember to press OK or BACK to return to the main screen, I'm wondering if this is the situation you have met? If not, please let me know, I will talk with our factory again!

Best Regards, :)

 

[riden2low]

Thanks, I will keep at it. Like I have said it has to be some simple step that I am not doing. I have a program going now. I have the light in an extra room and watching what it is doing. It is so far going thru the light cycles but have to wait until tomorrow morning to see if it turns off by it's self. If it does, then I know that I have done the programming right this time.

 

[MarsG]

Thanks, I will keep at it. Like I have said it has to be some simple step that I am not doing. I have a program going now. I have the light in an extra room and watching what it is doing. It is so far going thru the light cycles but have to wait until tomorrow morning to see if it turns off by it's self. If it does, then I know that I have done the programming right this time.

Let's see tomorrow morning, I wish all is going on well. :)

Good Night, have a nice dream :)

 

[riden2low]

What In did was changed the time to turn it on and changed the time to turn it off. It worked. Once I did a reprogram I was letting the light run thru it's program cycle. But I thought I got to wait 12 hrs to see if it goes off? The changing the time allowed me to check it quicker. It seems to be working now I hope. I think what I wasn't doing was pushing OK after I had the program in memory. But I was so sure that I did that yesterday. My problem was it wasn't turning off. It was running all of the light cycles. It did everything when I changed the time to check if it would turn off. So now the remote is back to the correct time and the light is back in the tent. So let it run it's full cycle and see what happens in the morning.

 

[MarsG]

Nowadays we are making some comparision videos between Mars Hydro and other brands in LED grow light market, next monday we will post them.... How exciting it is!:cool:

BLACK FRIDAY is coming soon, 10% discount for Mars Pro lights, are you ready? :party1::party1:

Best wishes everyone.

 

[riden2low]

Ok, this morning the Mars Pro was off. I guess this last reprogram did it. I think from the frustration of getting this remote to work by doing the factory reset did the trick. And too, if one button didn't do the program, hit another one,that just made it worst. So had to start all over, did the short program test (not the TEST BUTTON) by changing the time to make the unit turn off at the time programmed and then resetting the time again to make the programmed time to turn on. The programming that I had in memory, it was working but the unit would not turn off and thats the reason I did the time change. But PLANTS ARE HAPPY NOW LOL LOL And if this Mars Pro keeps working, I am happy too. LOL LOL

 

[riden2low]

Mars Pro Cree128 still. Must of got it programed. My plants are close the harvest. Got some Trainwreck ready to take to flower. See what the light will do and how the plants growth will be under the light. Hopefully get a larger harvest.

 

[weedlover85]

Hey Friends Just another Laydy is ready to Harvest :party1:

best greetz :)

 

[MarsG]

Ok, this morning the Mars Pro was off. I guess this last reprogram did it. I think from the frustration of getting this remote to work by doing the factory reset did the trick. And too, if one button didn't do the program, hit another one,that just made it worst. So had to start all over, did the short program test (not the TEST BUTTON) by changing the time to make the unit turn off at the time programmed and then resetting the time again to make the programmed time to turn on. The programming that I had in memory, it was working but the unit would not turn off and thats the reason I did the time change. But PLANTS ARE HAPPY NOW LOL LOL And if this Mars Pro keeps working, I am happy too. LOL LOL

Good Morning Riden2low,

I'm so happy to hear it worked ! I was wondering about this even on weekend, but finally knew it was off :D:D

Thanks for your feedback, we will talk about this with our factory, hope they can design a more developed remote!

I believe your plants are happy under tha Pro Cree 128, and I sincerely wish the light will make you happy as well :) :)

Wish you good harvest!

 

[MarsG]

Hey Friends Just another Laydy is ready to Harvest :party1:

best greetz :)

Good Mornign Weedlover!

Thanks for sharing with us:love2::love2::love2:

 

[MarsG]

Mars Grow Bar will be on show time soon~ :cool::love1:

 

[MarsG]

THIS IS MARS HYDRO :):)

 

[weedlover85]

Mars Grow Bar will be on show time soon~ :cool::love1:
View attachment 551203

haha very nice :smoking:

hope you make 2 arts of bars one for veg with coldwhite and blue , and one for flower with the 2 red :love1:

best greetz :)

 

[weedlover85]

THIS IS MARS HYDRO :):)

very nice too, but mars cob light ??? never seen it...

best greetz :)

 

[MarsG]

haha very nice :smoking:

hope you make 2 arts of bars one for veg with coldwhite and blue , and one for flower with the 2 red :love1:

best greetz :)

Thanks for your suggestion Weedlover! :D:D

 

[MarsG]

very nice too, but mars cob light ??? never seen it...

best greetz :)

Yeah We have produced some in 2013 when COB technology just came up, but the feedbacks from testers saying the result is not good as Mars II,so we stopped producing it.... ;);)

 

[BeglianHaze]

Good job Mars hydro!! :D:D:cool:

THIS IS MARS HYDRO :):)

od

 

[MarsG]

Good Morning guys, there are some companies announced their lights are with 10W chips, the so called 10w chips light, really 10w? Are they really safe to use? Check here, we did some research. :)

 

[juiceyjay]

Hey @MarsG I tried to go onto your site and order a tent from you but your website is not cell phone friendly at all. I needed separate billing and shipping addresses and this was impossible to do on a phone. When I tried to put in separate shipping info it put a transparent screen over existing page for me to enter info all the words are mixed with the other page and nothing can be read. I couldn't look over my info because the pictures from your site were covering everything and if I scroll the screen it moves both at once. So after an hour of frustration I didn't get your tent.. maybe make your site more cell phone friendly? Seeing as how lots of people order on their phones these days

 

[weedlover85]

Good Morning guys, there are some companies announced their lights are with 10W chips, the so called 10w chips light, really 10w? Are they really safe to use? Check here, we did some research. :)

haha very nice video, mars shows the true about the fake 10w panels :smoking:

by the way its the old panels , 2015 led ? its big joke newest led ? joke...

2015 led are - cluster led cob led or mars pro led :kiss:


best greetz :)