Perpetual Growing Cannabis In Water

[WS4U]

For sure some neat tech;)

My apologies for the confusion the other post did not show the photo until I it was to late to get an edit in so I would like to retract the first part of my post about not being of subject matter.

lols one love bro just funning , cant tke life to seriously youll never get out alive

 

[WS4U]

Did u guys have fun today?

 

[KiLoEleMeNt]

I am always having fun. Well at least when I am not remodeling the Fgrounds.

 

[KiLoEleMeNt]

lols one love bro just funning , cant tke life to seriously youll never get out alive

nice Jah bless so that I have a clear understanding of the matter here what is your goal for content or is this your status of grow thread or ????

 

[WS4U]

nice Jah bless so that I have a clear understanding of the matter here what is your goal for content or is this your status of grow thread or ????

Just to show the average person they can grow meds at home and stop getting ripped off, and have better medicine. And to bullshit lol. Nothings to serious as u can tell the feed has already gone of topic of just growing couple times already lol noobs to dwc/ people who want to try dec are more than welcome to comment any questions they may have:)

 

[KiLoEleMeNt]

Nice contined Sub I shall stay then I have a good idea of what is going to get the most attention however those LED's for sure that. So I don't want to be getting to far off but can you give us a little bit of details on what you have noticed since using them. Like did you go from HID to LED or straight into LED do you notice any growth difference between the entire growth not just a little "Oh they grow better and fatter" I want to know what exactly is the difference in pattern. I also think that the question of how long you have and how long with hid. Then lastly the all to common questions about bran bran bran I like bran muffins but my sister likes raisin bran who is better?

P. S. (I run a few led also. I am really just trying to contribute to your thread not debate led. As well nit sure if you have any better info than I but I hope u have something i dont we shall see..)

 

[WS4U]

Nice contined Sub I shall stay then I have a good idea of what is going to get the most attention however those LED's for sure that. So I don't want to be getting to far off but can you give us a little bit of details on what you have noticed since using them. Like did you go from HID to LED or straight into LED do you notice any growth difference between the entire growth not just a little "Oh they grow better and fatter" I want to know what exactly is the difference in pattern. I also think that the question of how long you have and how long with hid. Then lastly the all to common questions about bran bran bran I like bran muffins but my sister likes raisin bran who is better?

P. S. (I run a few led also. I am really just trying to contribute to your thread not debate led. As well nit sure if you have any better info than I but I hope u have something i dont we shall see..)

I grew with cfls for a year over a dozen in flower lmao, and then upgraded to one led, then 2 then 3. I have grown under hps t a friends house though for a good year also so i have experience with tem aswell. I like the leds be ause i have limited space and they keep the heat down and the electric down. If i had an entire grow room id probably go 600watt hps

 

[WS4U]

So my tips and tricks for today is scissor hash into oil by rosin pressing, you need parchment paper, 25micron screen, hair straightener and scissor has. My straightener goes form 0-20 i just turn it to 5 , i know u can get crazy accurate with a laser temp gun if you want but i dont lol. Put your ball of scissor has in a 25 micron pouche of screen, use as little material as you can but seal it good on all sides. Put the hash pouch in the middle of a big piece of parchment, there will be a larger oil splatter than youd think, a good 4x4 sheet folded in half should work well. Press down gently but firmly onto straightener with parchment and packet inside parchment. You may want to protect hand and u also want to make sure u r pressing on stable surface cuz you need to put your weight into it some to get a good press. I press for no longer than a 20 count.

 

[WS4U]

Yum yum gimme some

 

[KiLoEleMeNt]

Got blunt? Wana maymtch? I don't mind if you want to well then we should paradigm... get it cuz were going to pair two dimes hahahahhahahahahshshshsjsjjsbsbshdhfutikfnbx he hehe hahaha ahhhhhhwwahh well at least one of us laughed. ..... looks nice bro is she yours?

 

[WS4U]

Got blunt? Wana maymtch? I don't mind if you want to well then we should paradigm... get it cuz were going to pair two dimes hahahahhahahahahshshshsjsjjsbsbshdhfutikfnbx he hehe hahaha ahhhhhhwwahh well at least one of us laughed. ..... looks nice bro is she yours?

Yeppers, homegrown shit lol that shit looks dank too bro!

 

[KiLoEleMeNt]

Yeppers, homegrown shit lol that shit looks dank too bro!

What method of Dwc are you utilizing at the moment?


Here are some of my units that @ArcticOrange mentioned I move the water differently in motion to the point of it being on a titan 1 on 4 off fixed timer..... it is a dream to use it almost seems like it needs not to be successful in the dwc area I have never gotten a pathogen I couldn't just rinse out since I left each bucket solo I don't lose everything if I have an issue nor do I lose money on wasted nutes or water just let it run dry filler up with water or food alternate as the plant asks for the necessities and wait for the first harvest to roll..... loving the thread so far man I do hope many more join us for a few good ideas and good conversation therin I hope I learn something new and interesting to utilize myself. I fell as if the odds are pretty great that if you get a few more peeps who work in this area some very interesting and fun things can occur. Jah bless

 

[WS4U]

What method of Dwc are you utilizing at the moment?

pumping air int ro water with nutrients? Blue planet nutrients, idk if i understand the question lol to me dwc is a reservoir filled with lidquid and oxygen being pumped into the res, i like it cuz its super simple not allot of parts, just hafta check your numbers and have some knowhow:)

 

[WS4U]

What method of Dwc are you utilizing at the moment?


Here are some of my units that @ArcticOrange mentioned I move the water differently in motion to the point of it being on a titan 1 on 4 off fixed timer..... it is a dream to use it almost seems like it needs not to be successful in the dwc area I have never gotten a pathogen I couldn't just rinse out since I left each bucket solo I don't lose everything if I have an issue nor do I lose money on wasted nutes or water just let it run dry filler up with water or food alternate as the plant asks for the necessities and wait for the first harvest to roll..... loving the thread so far man I do hope many more join us for a few good ideas and good conversation therin I hope I learn something new and interesting to utilize myself. I fell as if the odds are pretty great that if you get a few more peeps who work in this area some very interesting and fun things can occur. Jah bless

Ok i see u have top feed and dwc, i pour water thru when topping off res thats how i cheat it lol, someone else mentioned thos drip rings on here

 

[ArcticOrange]

Ok i see u have top feed and dwc, i pour water thru when topping off res thats how i cheat it lol, someone else mentioned thos drip rings on here

I like that those rings only require an air pump to top feed. Its pretty cool.

 

[KiLoEleMeNt]

pumping air int ro water with nutrients? Blue planet nutrients, idk if i understand the question lol to me dwc is a reservoir filled with lidquid and oxygen being pumped into the res, i like it cuz its super simple not allot of parts, just hafta check your numbers and have some knowhow:)

Well I am clearly of a different mind set to what DWC is (IMO) ○●■□°¤▪♢☆♤ DWC can be used in many different ways such as my bucket setups or something like that in the commercial vegetable garden where 50ft long flood tables are in a circular motion where it just has a pump at one end of the line where it travels to the beginning point of the same or next table I have something similar to this in my current double stacker DWC table room i guess you could say it is a hybrid of undercurrent and dwc I use a soaker hose 1/4" for air stones running in between the ruts in the tables design. As for parts and all that the only extra parts I have on it are three hoses and two fittings that you never do anything to.... well at least I never have I run them in hot water with bleach after each run but it just sets in the bucket I was already going to use on the bucket and basket so for complexity sake this is honestly only three tube connected as one you have your air hose your insulator hose or upward motion hose whatever you want to be calling it, last the ring on top everything else but the T and the Y are just optional bits to make it face looking but in no way necessary for the use of ot and what the difference between the two

I like that those rings only require an air pump to top feed. Its pretty cool.

same here after the vortex I had at my shop I have been finding very which way to utilize this best part to me is it cost me $18 to make one thinking along the lines of other systems that do what these do it is more than way worth it man. Honestly just go give it a shot I'll bet you surely do better than ever before if you use dwc often that is. I am sure you must have a spare air pump and hose laying around somewhere if you do just add bucket basket and the three piece manifold, and you are cooking with fire mate.

 

[ArcticOrange]

Well I am clearly of a different mind set to what DWC is (IMO) ○●■□°¤▪♢☆♤ DWC can be used in many different ways such as my bucket setups or something like that in the commercial vegetable garden where 50ft long flood tables are in a circular motion where it just has a pump at one end of the line where it travels to the beginning point of the same or next table I have something similar to this in my current double stacker DWC table room i guess you could say it is a hybrid of undercurrent and dwc I use a soaker hose 1/4" for air stones running in between the ruts in the tables design. As for parts and all that the only extra parts I have on it are three hoses and two fittings that you never do anything to.... well at least I never have I run them in hot water with bleach after each run but it just sets in the bucket I was already going to use on the bucket and basket so for complexity sake this is honestly only three tube connected as one you have your air hose your insulator hose or upward motion hose whatever you want to be calling it, last the ring on top everything else but the T and the Y are just optional bits to make it face looking but in no way necessary for the use of ot and what the difference between the two

same here after the vortex I had at my shop I have been finding very which way to utilize this best part to me is it cost me $18 to make one thinking along the lines of other systems that do what these do it is more than way worth it man. Honestly just go give it a shot I'll bet you surely do better than ever before if you use dwc often that is. I am sure you must have a spare air pump and hose laying around somewhere if you do just add bucket basket and the three piece manifold, and you are cooking with fire mate.

I plan on giving it a go here soon, need another 600w for a spare room ive got sittin empty, ill throw a whole room of them and have a hayday.

 

[WS4U]

Well I am clearly of a different mind set to what DWC is (IMO) ○●■□°¤▪♢☆♤ DWC can be used in many different ways such as my bucket setups or something like that in the commercial vegetable garden where 50ft long flood tables are in a circular motion where it just has a pump at one end of the line where it travels to the beginning point of the same or next table I have something similar to this in my current double stacker DWC table room i guess you could say it is a hybrid of undercurrent and dwc I use a soaker hose 1/4" for air stones running in between the ruts in the tables design. As for parts and all that the only extra parts I have on it are three hoses and two fittings that you never do anything to.... well at least I never have I run them in hot water with bleach after each run but it just sets in the bucket I was already going to use on the bucket and basket so for complexity sake this is honestly only three tube connected as one you have your air hose your insulator hose or upward motion hose whatever you want to be calling it, last the ring on top everything else but the T and the Y are just optional bits to make it face looking but in no way necessary for the use of ot and what the difference between the two

same here after the vortex I had at my shop I have been finding very which way to utilize this best part to me is it cost me $18 to make one thinking along the lines of other systems that do what these do it is more than way worth it man. Honestly just go give it a shot I'll bet you surely do better than ever before if you use dwc often that is. I am sure you must have a spare air pump and hose laying around somewhere if you do just add bucket basket and the three piece manifold, and you are cooking with fire mate.

rdwc is when the water moves thru system, i just grow how i grow, its kinda unique and i just want to show people they dont need tons of space and equipment to get good meds at home, just some knowledge, time, and love:)

 

[KiLoEleMeNt]

I plan on giving it a go here soon, need another 600w for a spare room ive got sittin empty, ill throw a whole room of them and have a hayday.

Oh Dear... how you can make a guy's imagination run wild with thoughts of this nature choose your numbers carefully I would make a run in just one first depending on what you do these things make um big........ good luck I'll be watching I'll be waiting oh will I ever........010 1

rdwc is when the water moves thru system, i just grow how i grow, its kinda unique and i just want to show people they dont need tons of space and equipment to get good meds at home, just some knowledge, time, and love:)

I completely agree with you and thanks for sharing this with the community. I will say that I was not trying to get you to change. For the most part I was just implying the way they are setup is very simple to do and use. Also serves as a great way to make tea.
Lastly I also want to say that I don't mean to make you feel as if I had suggested that you change anything in your grow I always say don't fix what's not broken but I differ when I say to reinvent the wheel it has been Done successfully

 

[WS4U]

Oh Dear... how you can make a guy's imagination run wild with thoughts of this nature choose your numbers carefully I would make a run in just one first depending on what you do these things make um big........ good luck I'll be watching I'll be waiting oh will I ever........010 1
I completely agree with you and thanks for sharing this with the community. I will say that I was not trying to get you to change. For the most part I was just implying the way they are setup is very simple to do and use. Also serves as a great way to make tea.
Lastly I also want to say that I don't mean to make you feel as if I had suggested that you change anything in your grow I always say don't fix what's not broken but I differ when I say to reinvent the wheel it has been Done successfully

Yep gotta grow the way that works for u, i really like lookin at all kinds of grows to take tips and tricks from them and use them how i can