THCFarmer.com
121,230 Members Log In Register
Log In Register

Devil Anse Hatfield Inc......

Hey that temp/fan controller you got ,,, does it run the fan on low, and then speed it up if the temp reaches to high? I need one on my exhaust that will allow me to run on real low so that my rh can build up, but kick on if temps rise to much. I slowed it...
Home › Forums › Medical Cannabis Cultivation › Grow Diaries › Devil Anse Hatfield Inc......
Grow diary eligible · Medical Cannabis Cultivation

Devil Anse Hatfield Inc......

by EventHorizan · Started
1d
Running
0
Updates
991
Replies
0
Images
Overview Discussion 991 Gallery 0
Discussion below · 991 replies
Page 13 of 50 · Replies 241–260 of 992
Status
Not open for further replies.
#241
EventHorizan said:
Hey that temp/fan controller you got ,,, does it run the fan on low, and then speed it up if the temp reaches to high? I need one on my exhaust that will allow me to run on real low so that my rh can build up, but kick on if temps rise to much. I slowed it down woith my speed controller and that is allwing the rh to rise like i wanted but my temp has raised from 75.7 to 81.1 with 37 % rh at 30" and 54% at floor. Outside tent is 73.9 and 45% rh.

So rh must disipitate as it rises towards the lights or exhaust? Understanding where i should put the humiditor is my goal...
Click to expand...
Yea it has 3 settings I believe. The setting its on now is what you're talking about. It runs on idle until it hits a temp you set and it will ramp up until lowered again
 
#242
incogneato said:
Yea it has 3 settings I believe. The setting its on now is what you're talking about. It runs on idle until it hits a temp you set and it will ramp up until lowered again
Click to expand...
When you say it runs on idle , do you mean real real low? or off and then comes on as it reaches temp? And you said it will ramp up untill lowered again? As in it will turn on high and idle down as my set temp is reached?
 
#245
Image
 
#248
Born Christmas eve... These girls are 5 days old today... looking like we might have a good start..
Trying for 12 pds off 300watts. .. hehe hehe lol..
 

Attachments

  • 20161229_070736.jpg
    20161229_070736.jpg
    109 KB · Views: 77
  • 20161229_070725.jpg
    20161229_070725.jpg
    76.1 KB · Views: 78
  • 20161229_070720.jpg
    20161229_070720.jpg
    72.7 KB · Views: 78
  • 20161229_070709.jpg
    20161229_070709.jpg
    79.3 KB · Views: 74
Last edited:
#251
Your notice my hydro system is a Sunnyvale, made in Sunnyvale trailer court by Bubbles personally :)
I'm sending the control bucket off to have The Trailer Park boys autograph it lol...
Lol... oh I'm ready to go home!
 
#254
Wisher619 said:
its the ph down
Click to expand...
When looking and breaking down numbers like that @Wisher619 do i look at the .67 EC or do i look at the .45 when determining if im overfeeding? Does the salts from other (ph down,hydrogaurd, non nutrient) cause a problem or do i just have to worry about to much npk? Can you burn a plant with to high of EC (FROM) NON NUTRIENT based chemicals and/or thier salts?
 
#255
EventHorizan said:
When looking and breaking down numbers like that @Wisher619 do i look at the .67 EC or do i look at the .45 when determining if im overfeeding? Does the salts from other (ph down,hydrogaurd, non nutrient) cause a problem or do i just have to worry about to much npk? Can you burn a plant with to high of EC (FROM) NON NUTRIENT based chemicals and/or thier salts?
Click to expand...
yea tou can and ph down is a nutrient salt actually
as well as ph up

but you really dont have to factor that in to much with your feed because of such small quantities

I do however believe that your ec is pretty low.........very low so really it is a non issue
 
#256
Wisher619 said:
yea tou can and ph down is a nutrient salt actually
as well as ph up

but you really dont have to factor that in to much with your feed because of such small quantities

I do however believe that your ec is pretty low.........very low so really it is a non issue
Click to expand...
I would personally be running .8-1.0 right now.....but I like to get crazy
 
#259
EventHorizan said:
Lol well don't make me go Loco and burn these autos trying to see if they are soldiers :)
Click to expand...
hhahahaha

if you really think about it that is super low as is
less than tap water where im from
hell my tap is 849 ppm with 420ppm being sulfate

I was actually just reading an article about how the trend is rock it super low especially in DWC but that somewhere around 1.8-2.0 is optimal with .7-1.0 for seedlings and 1.4-1.8 for veg

the article actually said to push all the way to slight tip burn and then pull back slightly
that way you know your plants are getting the maximum that they can take
pushing them to there optimal growth within the enviroment
 
#260
Wisher619 said:
I would personally be running .8-1.0 right now.....but I like to get crazy
Click to expand...
31
Wisher619 said:
hhahahaha

if you really think about it that is super low as is
less than tap water where im from
hell my tap is 849 ppm with 420ppm being sulfate

I was actually just reading an article about how the trend is rock it super low especially in DWC but that somewhere around 1.8-2.0 is optimal with .7-1.0 for seedlings and 1.4-1.8 for veg

the article actually said to push all the way to slight tip burn and then pull back slightly
that way you know your plants are getting the maximum that they can take
pushing them to there optimal growth within the enviroment
Click to expand...
.7 to 1.0 for seedlungs. I AT .67.. or am I at .45? Should I raise it to .7 then add hydgrd and pH up/down... Should I only really be concerned with EC before the hydrgrd and pH up/down?
 
Status
Not open for further replies.
Page 13 of 50 · Replies 241–260 of 992
Back
Top Bottom