Clap Clap From The Front To That Back Ever Clear Start To Finish

[Two.Bears]

Thanks :)

It turned out like shatter.
My wife knocked it on the floor the other day and it fractured into 10 pieces.

Just being honest brother. I have made RSO It never had the gold highlights as yours does. Mine was always black as tar. Before the alcohol was purged

 

[rmoltis]

Just being honest brother. I have made RSO It never had the gold highlights as yours does. Mine was always black as tar. Before the alcohol was purged

What part of the plant did you use?

My trim seems to come out darker.

But I used strictly top cola's for the run in that pic.

Here is the wash before purge

And the patty after finish and consolidation with backlighting.

 

[tinderthumbs]

Was that extracted with ISO or Everclear?

ever clear

 

[tinderthumbs]

What part of the plant did you use?

My trim seems to come out darker.

But I used strictly top cola's for the run in that pic.

Here is the wash before purge
View attachment 666079

And the patty after finish and consolidation with backlighting.
View attachment 666080

that's super sexy im jelly

 

[Two.Bears]

What part of the plant did you use?

My trim seems to come out darker.

But I used strictly top cola's for the run in that pic.

Here is the wash before purge
View attachment 666079

And the patty after finish and consolidation with backlighting.
View attachment 666080

I used buds. Its all i had. I used Everclear as Solvent. I let the Everclear extract for 3-3 1/2 minutes

 

[Two.Bears]

ever clear

Thought so. Every time i use ever clear it looks dark brown or black.

Try this next time the stuff starts getting gooey pour off the puddle of liquid Gathered in a low place onto another piece of parchment paper And purge the gooey stuff left behind. Ive heard that helps prevent the black tar effect but never tried it myself. So i dont know if it works or not.

I now use 99% ISO exclusively when making concentrates after i found that 99% ISO gives me much 7-11% higher yields than Everclear.

The only thing i use Everclear for now is for making the Green dragon tincture.

From what i can determine 99% ISO is better at extraction than butane.

With Super Silver Haze or Girl Scout Cookies (not sure which now) i got 24.5 % yield even after winterizing to get rid of clorophyll, lipids and solids. A friend blasted the same strain with butane and only received 22% yield non winterized, and i had bought my buds from him.

 

[Two.Bears]

that's super sexy im jelly

Yes. Agree. Best looking RSO I ever saw. Certainly better than RSO I made.

 

[Two.Bears]

What part of the plant did you use?

My trim seems to come out darker.

But I used strictly top cola's for the run in that pic.

Here is the wash before purge
View attachment 666079

And the patty after finish and consolidation with backlighting.
View attachment 666080

How did you purge the Solvent, and which Solvent did you use?

 

[rmoltis]

How did you purge the Solvent, and which Solvent did you use?

%99 iso.

Ground up all the fully dried cured bud in the magic bullet. Turned it to dust.

Then filled with iso and blended for 30 seconds.

Rough strained the plant matter.

Added matter back to bullet with more iso for 2nd wash.

Combined washes and ran through coffee filters. Then a 2nd time.

Added washed scraps to my iso scrap jar.

A saucepan filled with water, a silicone 9" round pan floating on top containing the solution.

Kept water below boiling point until most was evapped. Then at the end about 5 minutes of boiling water for the final purge. The boiling water can't exceed 212 (boiling point). And the heat loss through the silicone I'd say 200° the oil reaches or so at the end.

This final purge at the end helps turn it into a shatter consistancy.


At the end I take the silicone pan and fold it over itself to get the oil consolidated.
Makes for an easy job.

 

[Two.Bears]

%99 iso.

Ground up all the fully dried cured bud in the magic bullet. Turned it to dust.

Then filled with iso and blended for 30 seconds.

Rough strained the plant matter.

Added matter back to bullet with more iso for 2nd wash.

Combined washes and ran through coffee filters. Then a 2nd time.

Added washed scraps to my iso scrap jar.

A saucepan filled with water, a silicone 9" round pan floating on top containing the solution.

Kept water below boiling point until most was evapped. Then at the end about 5 minutes of boiling water for the final purge. The boiling water can't exceed 212 (boiling point). And the heat loss through the silicone I'd say 200° the oil reaches or so at the end.

This final purge at the end helps turn it into a shatter consistancy.


At the end I take the silicone pan and fold it over itself to get the oil consolidated.
Makes for an easy job.

Thanks for sharing

I had a Magic Bullet wben i lived in Washington state 2004-2010. Mine leaked terribly until my smoothies got in the gears and it stopped working

 

[smokedareefer]

%99 iso.

Ground up all the fully dried cured bud in the magic bullet. Turned it to dust.

Then filled with iso and blended for 30 seconds.

Rough strained the plant matter.

Added matter back to bullet with more iso for 2nd wash.

Combined washes and ran through coffee filters. Then a 2nd time.

Added washed scraps to my iso scrap jar.

A saucepan filled with water, a silicone 9" round pan floating on top containing the solution.

Kept water below boiling point until most was evapped. Then at the end about 5 minutes of boiling water for the final purge. The boiling water can't exceed 212 (boiling point). And the heat loss through the silicone I'd say 200° the oil reaches or so at the end.

This final purge at the end helps turn it into a shatter consistancy.


At the end I take the silicone pan and fold it over itself to get the oil consolidated.
Makes for an easy job.

thanks for your play by play. if your making a consistent shatter type product then i think youve nailed it.

but i wouldnt call it rso oil because its never been fully decarbed.

https://skunkpharmresearch.com/decarboxylation/

 

[Two.Bears]

thanks for your play by play. if your making a consistent shatter type product then i think youve nailed it.

but i wouldnt call it rso oil because its never been fully decarbed.

https://skunkpharmresearch.com/decarboxylation/

I disagree. Completely. He said during tge final purge he had tge temp 180-200 degrees. That will decarb tge oil. Thats the Temperature i use when i mske My Cannabis eJuice. A few puffs abd my pain goes bye bye.

If you're saying its not RSO because he didn't use Namptha. You're wrong there too. I Read Rick Simpson's book abd he says any of the three solvents can be used when making RSO.

99% isopropyl
Ethanol
Light Namptha

You were correct when you said he nailed it. Best looking RSO I ever saw. Well done @rmoltis

 

[jipp]

not I got fat tits but as u see no butt

no ass pfft,
here you go, i have zero ass. hah lost it in my accident, or sumtin... can you lose ass ? thought older we get bigger it should grow too. laughs.

im six foot five.. that scar is 6 inchs. its were they removed that evil pain implant, fucked my back up, but whatever..

chris.

 

[rmoltis]

I disagree. Completely. He said during tge final purge he had tge temp 180-200 degrees. That will decarb tge oil. Thats the Temperature i use when i mske My Cannabis eJuice. A few puffs abd my pain goes bye bye.

If you're saying its not RSO because he didn't use Namptha. You're wrong there too. I Read Rick Simpson's book abd he says any of the three solvents can be used when making RSO.

99% isopropyl
Ethanol
Light Namptha

You were correct when you said he nailed it. Best looking RSO I ever saw. Well done @rmoltis

You are correct it is decarbed at the end.

I ingest it and it's effective.
And even as a dab gives a nice sedative/pain killing effect.

I dose my cat regularly as her cancer medicine. And she responds great to it.
Stimulates her thirst and appetite. Allows her to find comfort, relax and rest when she needs.

The meds make her tired.
But the oil also helps her play and be cuddly when she feels.

It truly is great to see how much it helps her. Warms your heart when you see her fully relaxed stretched out. Just allowing her discomfort to fade away for a few hours.

 

[Two.Bears]

You are correct it is decarbed at the end.

I ingest it and it's effective.
And even as a dab gives a nice sedative/pain killing effect.

I dose my cat regularly as her cancer medicine. And she responds great to it.
Stimulates her thirst and appetite. Allows her to find comfort, relax and rest when she needs.

The meds make her tired.
But the oil also helps her play and be cuddly when she feels.

It truly is great to see how much it helps her. Warms your heart when you see her fully relaxed stretched out. Just allowing her discomfort to fade away for a few hours.
View attachment 666213

Don't know why some think it isnt decarbed unless its decarbed at the beginning in the oven

The THC A gets converted to THC. It doesnt matter what step it is in the process.

I don't decarb my concentrates at tge beginning. I just because extract and concentrate. Its going to be decarbed when i vape it in my wax Atomizer.

 

[rmoltis]

Don't know why some think it isnt decarbed unless its decarbed at the beginning in the oven

The THC A gets converted to THC. It doesnt matter what step it is in the process.

I don't decarb my concentrates at tge beginning. I just because extract and concentrate. Its going to be decarbed when i vape it in my wax Atomizer.

Here are some more pics showing my method. I do it in my micro tent with inline fan ventilation to the outside.
And has filtered intake air. I have an electric hot plate. And there's water under that silicone pan.

Before purge

After purge

 

[smokedareefer]

I disagree. Completely. He said during tge final purge he had tge temp 180-200 degrees.

two parts to decarboxylation, time and temperature

rmoltis discribed method has not met neither to be called rso.

rso has been fully decarbed by heat

if you have read the book or watched the video those few drops of water added to the rso near the end boil is so you can visually see when total decarboxylation is complete.

 

[rmoltis]

two parts to decarboxylation, time and temperature

rmoltis discribed method has not met neither to be called rso.

rso has been fully decarbed by heat

if you have read the book or watched the video those few drops of water added to the rso near the end boil is so you can visually see when total decarboxylation is complete.

Rick Simpsons recipe has changed over the years he used to say don't decarb.

My rso is a combination of the thca and the activated thc.

That way I get both worlds.
They say thca is more available to the body. But that the thc passes the blood brain barrier.

So having a combo is perfect.
I've eaten it and felt very good for quite a few hours so I know it works.

And it wouldn't get me high if it wasn't decarbed at all. The purging process is about 1hr long followed by 5 mins of boiling at the end. Suppose I could just leave it at boiling the whole time.

But then I'd only have half what I want instead of the combo.

It really boils down to what you want/ how you want to tailor the cannabinoid profile.

Our kitty has cancer so having the combo is ideal. I want to minimize terpenes loss since their role in helping the other cannabinoids do their job in the body is important.

So think of this as my own recipe based on my personal beliefs/needs.

 

[tinderthumbs]

u need 180 f to decarb right??

 

[rmoltis]

u need 180 f to decarb right??