THCFarmer.com
121,257 Members Log In Register
Log In Register

Iso/everclear Slab... No Butane.

  • Thread starter Thread starter GT21
  • Start date Start date
  • Tagged users Tagged users None

Iso/everclear Slab... No Butane.

GT21 1,718 Replies 210,046 Views
Page 66 of 86 · Replies 1,301–1,320 of 1,719
Status
Not open for further replies.
#1,301
If it's already a "rock" most likely not going to be able to bring it back to anything but rock consistency. Only thing I can think if now is add it to (depending on weight of piece) some iso and redo it.
 
#1,303
I might get pissed and kick it 2 or 3 times but I wont give up so about to make another batch here is all im going to do step for step so no ? of what im doing

step 1 every thing in the cooler as cold as it can get
step 2 mix suger leafs and ever clear
step 3 shake 10-20 sec
step 4 pour in to ether coffee filters I have paper ones and a plastic one that is fire (best I have found) or if nothing els I use a 25 bubble bag
step 5 put pyr on heat source so far been a double boil for how ever long it take
step 6 scrap and get pissed bc it keeps coming out powder
 
#1,304
tinderthumbs said:
I might get pissed and kick it 2 or 3 times but I wont give up so about to make another batch here is all im going to do step for step so no ? of what im doing

step 1 every thing in the cooler as cold as it can get
step 2 mix suger leafs and ever clear
step 3 shake 10-20 sec
step 4 pour in to ether coffee filters I have paper ones and a plastic one that is fire (best I have found) or if nothing els I use a 25 bubble bag
step 5 put pyr on heat source so far been a double boil for how ever long it take
step 6 scrap and get pissed bc it keeps coming out powder
Click to expand...
Step 3.5 -seperate plant material from liquid materials, then strain just liquid material. If you are straining plant and liquid together that's probably your main problem.
 
#1,306
this is what I strain with
 

Attachments

  • SANY0260.JPG
    SANY0260.JPG
    131.9 KB · Views: 157
#1,307
tinderthumbs said:
sorry super blazed not 100%sure what u are saying
Click to expand...
Ok next time when u pour liquid into that from jar make sure u just poor the liquid no green plant material. Keep all the plant material in the jar and only let the gold liquid be strained thru the filter. I assume you were putting everything from the swish jar into the filter and thats what was causing your slow filter time. Normally takes me no like than like 5 minutes for the liquid to go thru strainer.
 
#1,308
ok now I see what saying u see the pic of that plastic filter its the best I pour in to that and run my finger of the top and pours like a stream id say 1min but ill go with 2min so I have the worst case
 
#1,309
what im thinking is going wrong is the cook off this time im thinking im going with baking dish that is going to be setting in a hot water bath with the ec setting jar lid under the dish so not setting on bottom of heat source
 
#1,310
WS4U said:
Ok next time when u pour liquid into that from jar make sure u just poor the liquid no green plant material. Keep all the plant material in the jar and only let the gold liquid be strained thru the filter. I assume you were putting everything from the swish jar into the filter and thats what was causing your slow filter time. Normally takes me no like than like 5 minutes for the liquid to go thru strainer.
Click to expand...
I use a chinois strainer for the first pass and a commercial coffee filter for the second pass if doing by gravity and a #1 lab filter if vacuum filtering. https://www.webstaurantstore.com/10-bouillon-chinois-strainer/40740P.html

Important to not press the alcohol out of the inside of the plant material and mix it with the alcohol that drains off the outside of the plant material.
 
#1,312
tinderthumbs said:
what im thinking is going wrong is the cook off this time im thinking im going with baking dish that is going to be setting in a hot water bath with the ec setting jar lid under the dish so not setting on bottom of heat source
Click to expand...
I don't know, but is it possible to get the solution to hot even when using the water to cook it. My buddy watched me last time, said I might be wreckin my the. By cooking to hot. I thought it would be fine cus it's not burning.
 
#1,313
GT21 said:
Nuwaves are for making crack... you want a double boiler which is cheap and easy
Click to expand...
cant use a nuewave for cooking it blow up but not like a oven the nuwave gets to temp as soon as it starts no heat up at all
ps trying to get away from double boil so I don't have water vap going up the side of my dish
qt I thought u used a toater oven to heat yours??
 
#1,314
tinderthumbs said:
cant use a nuewave for cooking it blow up but not like a oven the nuwave gets to temp as soon as it starts no heat up at all
ps trying to get away from double boil so I don't have water vap going up the side of my dish
qt I thought u used a toater oven to heat yours??
Click to expand...
Thats my favorite. .. throw it on top of the toaster
 
#1,315
also don't have one of them lol I have a nuwave lol I also have a microwave u can use as a oven but that's all in closed boom so nty what u think about a hot water bath low heat as low as it can go no boil no water vapper?
 
Status
Not open for further replies.
Page 66 of 86 · Replies 1,301–1,320 of 1,719
Back
Top Bottom