Devil Anse Hatfield Inc......

[GrowGod]

Where is the sd x pE picks??

 

[Wisher619]

My damn water temps are 55. I cant get the water temps up for shit. I got a 50 gal heater in there, but it aint doing shit today.

is it broken?
gotta get the res off the ground
go to the grocery store and grab a pallet from shipping
throw that under the res

 

[EventHorizan]

is it broken?
gotta get the res off the ground
go to the grocery store and grab a pallet from shipping
throw that under the res

When I drain it out, im gonna put 1/2 foam board down under all the buckets.
If that dont work I buy a 500 watt heater.
I think the speed of the water flow is too much for my lil water heater. It did great with 15 gal, but 45 gal is another story.

 

[EventHorizan]

Boil a gallon or two should bump ya up a bit :love1:

i thought about that too lol

 

[EventHorizan]

Where is the sd x pE picks??

its gone. I lost the clones to them as they didnt root. My diy cloner I think had pythium, and it just moved right to the cuttings and they didnt root..
I how ever did get 1 good seed that came from the Urkles girl that I figured was a light herm, but the seed didnt produce nothing like the mother plant. It doesnt have the notorious black leaves. Materfact its greener than the grass. It had to be a sour D that hermed and just effected the top cola of the Urkles Girl. So it must be Sour Urkle x Urkles Girl... So i Guess she is Sour Urkles Girl
It has a great smell!!! It reminds me of pineapples. Its also what I got in the commercial system running, so im pretty excited that it has a great smell. Hopefully that carries over to cure.. Ive seen some lose some and I swear I had some gain some smell after dry/cure..

Now I need to herm the sour urkle girl and breed her to the cookie glue so I can steal that pineapple and get it in the cookie glue.

 

[GrowGod]

its gone. I lost the clones to them as they didnt root. My diy cloner I think had pythium, and it just moved right to the cuttings and they didnt root..
I how ever did get 1 good seed that came from the Urkles girl that I figured was a light herm, but the seed didnt produce nothing like the mother plant. It doesnt have the notorious black leaves. Materfact its greener than the grass. It had to be a sour D that hermed and just effected the top cola of the Urkles Girl. So it must be Sour Urkle x Urkles Girl... So i Guess she is Sour Urkles Girl
It has a great smell!!! It reminds me of pineapples. Its also what I got in the commercial system running, so im pretty excited that it has a great smell. Hopefully that carries over to cure.. Ive seen some lose some and I swear I had some gain some smell after dry/cure..

Now I need to herm the sour urkle girl and breed her to the cookie glue so I can steal that pineapple and get it in the cookie glue.

Pythium fusarium etc. are all equal to the devil! Can get very ugly. For next time I always keep a bottle of physan20 around. 1 ml to 10 gallons of water and they would have had a great chance to root.
I was at a point at 1 time where I was cutting 250 clones to get 28. And even then they barely made it lol

 

[EventHorizan]

Pythium fusarium etc. are all equal to the devil! Can get very ugly. For next time I always keep a bottle of physan20 around. 1 ml to 10 gallons of water and they would have had a great chance to root.
I was at a point at 1 time where I was cutting 250 clones to get 28. And even then they barely made it lol

No I didnt clean the cloner after i used it with bleach and I had left the clones in so long that they got pythium, then I didnt bleach after use.. Dumber than fuck..
I have a turbo cloner now, and I ran bleach in it for 3 days straight after I finished using it, and them clones looked great.

That was over a year ago.. Im alot cleaner now when it comes to my cuttings and my roots.
I also use +life in every step from cutting to flower weekly. It makes the cuttings just blow up with roots, and them nice web roots with the fine hairs. Look like fuzzy white mold.. +life for the win for real.. If there is such things as secret stuff, then +life and other beenies are it!

 

[incogneato]

Whats up fellas. Hope all is well with you pot farmin fools. Wont be on a ton, trying to make the best of my time off.

 

[Toph420]

No I didnt clean the cloner after i used it with bleach and I had left the clones in so long that they got pythium, then I didnt bleach after use.. Dumber than fuck..
I have a turbo cloner now, and I ran bleach in it for 3 days straight after I finished using it, and them clones looked great.

That was over a year ago.. Im alot cleaner now when it comes to my cuttings and my roots.
I also use +life in every step from cutting to flower weekly. It makes the cuttings just blow up with roots, and them nice web roots with the fine hairs. Look like fuzzy white mold.. +life for the win for real.. If there is such things as secret stuff, then +life and other beenies are it!

speaking of cleaning cloners i cleaned the shit out of mine last night, took like 2hours.. Looks brand new though.

Figured out the water pump that my cloner came with was completely burned out which is a bummer.. but i was able to use a small 160gph pump i had laying around. Also put a short cycle timer on the water pump set to 1 minute on 4 minutes off.

Took cuttings last night and flipped, I should have flipped when you told me to haha. Just been so fuckin busy lately.

 

[Toph420]

No I didnt clean the cloner after i used it with bleach and I had left the clones in so long that they got pythium, then I didnt bleach after use.. Dumber than fuck..
I have a turbo cloner now, and I ran bleach in it for 3 days straight after I finished using it, and them clones looked great.

That was over a year ago.. Im alot cleaner now when it comes to my cuttings and my roots.
I also use +life in every step from cutting to flower weekly. It makes the cuttings just blow up with roots, and them nice web roots with the fine hairs. Look like fuzzy white mold.. +life for the win for real.. If there is such things as secret stuff, then +life and other beenies are it!

ive probably asked you this before but what nute recipe you using in the turbo cloner?

 

[EventHorizan]

Whats up fellas. Hope all is well with you pot farmin fools. Wont be on a ton, trying to make the best of my time off.

cool brother.. We done slowed this thread down so everyone can stay up to date anyway..

 

[EventHorizan]

speaking of cleaning cloners i cleaned the shit out of mine last night, took like 2hours.. Looks brand new though.

Figured out the water pump that my cloner came with was completely burned out which is a bummer.. but i was able to use a small 160gph pump i had laying around. Also put a short cycle timer on the water pump set to 1 minute on 4 minutes off.

Took cuttings last night and flipped, I should have flipped when you told me to haha. Just been so fuckin busy lately.

Is that from letting it run low on water?
I want the big turbo kloner, then hack a auto top off, and a drain valve at bottom. But other than that, it the bees knees..

 

[EventHorizan]

ive probably asked you this before but what nute recipe you using in the turbo cloner?

5 ml per gal first 5 to 7 days, then 10 to 15 ml last 7 to 10 days of cloning solution. And just a pinch of +life.
One thing to be on top of, dont let it go down to next to nothing. Add every 2 days after roots start wicking up the solution. Allowing the water level to rise and fall in dwc, esp to very low levels, is almost prime condition for pythium. If you have her dialed in with Ec, and temp, rh, water freq, then you can let it go from 5 gal to 3 gal without much problem, but let the Ec rise as you go low on solution, and you just may very well stunt the crop, and cause roots to die, and cause a serious pythuim outbreak.

 

[Toph420]

Is that from letting it run low on water?
I want the big turbo kloner, then hack a auto top off, and a drain valve at bottom. But other than that, it the bees knees..

not sure exactly why it happened.. i couldve sworn the pump was working the last time i used it.. I do think ive let the water level get low more than a couple times though haha.. oops..

5 ml per gal first 5 to 7 days, then 10 to 15 ml last 7 to 10 days of cloning solution. And just a pinch of +life.
One thing to be on top of, dont let it go down to next to nothing. Add every 2 days after roots start wicking up the solution. Allowing the water level to rise and fall in dwc, esp to very low levels, is almost prime condition for pythium. If you have her dialed in with Ec, and temp, rh, water freq, then you can let it go from 5 gal to 3 gal without much problem, but let the Ec rise as you go low on solution, and you just may very well stunt the crop, and cause roots to die, and cause a serious pythuim outbreak.

cool, thanks ill make sure to stay ontop of the water level this time as i almost lost a few cuts last round..

 

[Toph420]

Dang I seem to have bad luck with titan stuff, came home and my short cycle timer was stuck powered on.. it shows the output power light turning off and on but power stays on.. lame, I love using amazon because they are so easy to return/replace stuff on...

 

[Thejoeybrown]

Platinum OG from dark heart ready for some fan leaf clipping.

 

[Thejoeybrown]

And The White from dark heart.
Super tight nodal spacing. Gone let her get a little bigger before and defol.

 

[Toph420]

Platinum OG from dark heart ready for some fan leaf clipping.

Nice I just put one of their plat og cuts into flower yesterday..

 

[EventHorizan]

lookin good fellas

 

[EventHorizan]

Dang I seem to have bad luck with titan stuff, came home and my short cycle timer was stuck powered on.. it shows the output power light turning off and on but power stays on.. lame, I love using amazon because they are so easy to return/replace stuff on...

that sucks bro!