thats why people pay there reg bill... and jump the meter run to a 200 amp panel with a cut off switch right before it .......
As long as your not grounded and your not trying to hook up something that has load on it your good to go. Always remember though when In doubt lift the opposite foot off the ground ( if you're touching with your right hand lift your left leg ) that prevents a short circuit across your heart and goes straight down your leg, still a zap but you'll live through it if you do get tagged bad.
Yeah used to be way easier too nowadays have to cut into live wire in most places
0.059 per kwh? That's less than 1/3 my costs for electricity. I'm at 0.15 + 15% tax per kwh So ya you have a great price. My 1000w flower + my 200w veg + fans = $100.00 / month
Im in a light industrial zone is why so low. My lease is 2700 so it makes up for it
Do you recommend these there priced lower than ones I’ve seen at Hydro shops
I'm new to this but @MIMedGrower can point you in the right direction. Blessings my bud hope all goes well.
I'm sorry bud .I just figured since you are so knowledgeable that you might know that was a reputable brand.
Thanks guys I’m really struggling with this decision I want to go CMH to reduce heat my budget is not that great I believe the fixture are all the same plug in a good bulb and boom it’s on
or maybe not
Can you run a 4 x 4 tent with led lights fan filter , small fan , ect on a 15 amp breaker
Just to add on to this; know your circuits. There may be other items on it you're plugging into (hallway lights, tv, bathroom, microwave!, etc). You need to add up all the amps of items on the circuit before proceeding to ensure safety. You may need to reconfigure electrical loads on a couple circuits.
I was going run new breakers to them so I would that the only thing on it.
15 amps ballpark 1500 watts max. fans are low watt so is the led stay below 1500 w alls good go above you could trip breakers or heat up the wires. If you have space in the panel and are considering up grading you could pull a 3 wire and run 2 -15 amp circuits.
I think that's I well do .
