THCFarmer.com
121,231 Members Log In Register
Log In Register

Highest Cut First Grow

  • Thread starter Thread starter HighestCut
  • Start date Start date
  • Tagged users Tagged users None

Highest Cut First Grow

HighestCut 199 Replies 18,964 Views
Page 4 of 10 · Replies 61–80 of 200
#61
Irishking said:
Buddy look at ur stems. That a cal mag deficiency. Are u watering with RO or distilled water. If so u must add. Dark red purple stems r 100% signs of cal mag deficiency especially if ur plant look like it suffering. Hope this help. Just buy cal mag from ur local store
Click to expand...
100% BS... under HPS maybe but I never had red or purple stems under HPS, same strains under Intense LED's make stems red & purple depending on the strain. There is nothing any Cal, mag, nitrogen, P or K will do to fix it under led. I feed mine much more calcium under white LED's & I get the most red & purple stems, but its nothing to fret as the leaves tell the real story & there is no cal deficiency with my plants... but what is a magnesium/calcium deficiency is what I circled in this pic
 

Attachments

  • Screen Shot 2020-02-17 at 11.19.46 AM.png
    Screen Shot 2020-02-17 at 11.19.46 AM.png
    175 KB · Views: 97
#63
HighestCut said:
pH is coming out exactly what I am putting in, 5.8-5.9

PPM was coming out 1800 when I fed and 800 with plain water. (Feeding at 800-900 ppm)
What do these results tell you?
Click to expand...


Tells me the plants are eating most of what you are feeding them but its very high ppm and it will build up.
 
#64
Irishking said:
Buddy look at ur stems. That a cal mag deficiency. Are u watering with RO or distilled water. If so u must add. Dark red purple stems r 100% signs of cal mag deficiency especially if ur plant look like it suffering. Hope this help. Just buy cal mag from ur local store
Click to expand...

I bought some GH CaliMagic and have been putting 100-200 ppm calimagic. The plant did not get any cal/mag until about a week ago.
 
#65
MIMedGrower said:
Tells me the plants are eating most of what you are feeding them but its very high ppm and it will build up.
Click to expand...

I just had a plain water feed, I’ll let you know what the ppm coming out is on next feed.

thanks for the explanation, now I understand it is a method to see what is being consumed!
 
#66
HighestCut said:
I just had a plain water feed, I’ll let you know what the ppm coming out is on next feed.

thanks for the explanation, now I understand it is a method to see what is being consumed!
Click to expand...


Runoff should be checked every time so we can see trends developing. It will show ph going up or down as well as ppm and its color and if it smells can alert us to problems as well.

But it is not accurate enough to trust just a random check once in a while. It can be different than the root zone.
 
#67
MIMedGrower said:
Runoff should be checked every time so we can see trends developing. It will show ph going up or down as well as ppm and its color and if it smells can alert us to problems as well.

But it is not accurate enough to trust just a random check once in a while. It can be different than the root zone.
Click to expand...

I am checking it with every feed now and will keep you posted. What problems signs should I be looking for in the run off numbers?

Since starting to water with run off, I have not gone over 10% run off.
 
#69
HighestCut said:
I am checking it with every feed now and will keep you posted. What problems signs should I be looking for in the run off numbers?

Since starting to water with run off, I have not gone over 10% run off.
Click to expand...


Mostly that the ec goes up a lot more than you put in. And usually 15-20% runoff is suggested but it is just a guideline. I want to wash out calcium amd iron from my well water so i use more runoff.
 
#71
MIMedGrower said:
Mostly that the ec goes up a lot more than you put in. And usually 15-20% runoff is suggested but it is just a guideline. I want to wash out calcium amd iron from my well water so i use more runoff.
Click to expand...

My TDS meter says it has ec capability, but not sure how to test it correctly. I see numbers like1.0 -1.3 ec, but the meter reads like 1800 u/cm

4CAFFBCE 07EB 495B 848F A95143718305
 
#74
#76
#77
Numbers i see for this stage of the plant say input EC levels should be 1.2-1.5; does that sound right?
 
#80
Good job man. You got over that "over/under watering" stage, super quick. It took me forever to figure out the schedule(but I'm slower then others LOL). It looks like you got it down.

That plant is looking phenomenal. I mean, sure like you said a little nute burn. But what's wrong with that plant? Absolutely nothing IMO.

Just keep her happy and healthy until the finish line, you got this. :D
 
Page 4 of 10 · Replies 61–80 of 200
Back
Top Bottom