Calcium issues with autos and calmag

  • Thread starter Wolters_88
  • Start date
  • Tagged users None
Aqua Man

Aqua Man

26,480
638
I have an RO and RODI system for my fish tank. But everyone said not to use rodi.
Lol sorry but I dont know why that was said. I have both also and you can absolutely and in your case should and mustuse them. I can see if it was just municipal tap water with no softener then you wouldn't need to but anyhow you do so here we go.

Take RO/RODI and add 100-150ppm of cal mag this should be about half the recommended dose.

Then add nutrients at 2.5ml per gal of each. Add half dose of terminator and drop the purpinator you have no need for it or its magical unicorn claims.

Then ph down to 5.8 and feed 1 litre to each plant. You want to get 100-200ml coming out as run off of THAT 1 litre. If you get less feed until you get runoff and increase the frequency of watering.

Right now I would 1-2 times perr day and see from there. It's explained in the thread I linked.

I'm off to bed and may not be on for a while so hopefully someone else can pick up if ya need now that the issue was found.
 
Wolters_88

Wolters_88

115
28
Lol sorry but I dont know why that was said. I have both also and you can absolutely and in your case should and mustuse them. I can see if it was just municipal tap water with no softener then you wouldn't need to but anyhow you do so here we go.

Take RO/RODI and add 100-150ppm of cal mag this should be about half the recommended dose.

Then add nutrients at 2.5ml per gal of each. Add half dose of terminator and drop the purpinator you have no need for it or its magical unicorn claims.

Then ph down to 5.8 and feed 1 litre to each plant. You want to get 100-200ml coming out as run off of THAT 1 litre. If you get less feed until you get runoff and increase the frequency of watering.

Right now I would 1-2 times perr day and see from there. It's explained in the thread I linked.

I'm off to bed and may not be on for a while so hopefully someone else can pick up if ya need now that the issue was found.
I would get no run off with a liter. When I water I put half a gallon in then the other half and get no runoff with the first half gallon.
 
philzfree420now

philzfree420now

6
3
Ok, so this is my third grow and once again I’m having the same issue. I can’t seem to not get a calcium deficiency. I put in 5ml of calmag per gallon with every single feed. The plants look great but it’s still happening. Attached are my girls just going into flower. Is there anything else I can add to help this issue?
I had similar problems then i swapped to nectar of the gods nutrient line and since it's a calcium based nute line I don't have that problem anymore and no others, it's an organic line! Try it you will love it if you have calcium problems! Keep it Green!
 
philzfree420now

philzfree420now

6
3
Nectar of the AGods#4 organic soil if doin auto's don't add anything until week 9 or 10 but then only if needed! Fantastic stuff using it because no ProMix in any stores as it's seasonal and it costs 2 x what it woyuld in the store to have deliverted
 
philzfree420now

philzfree420now

6
3
Lol sorry but I dont know why that was said. I have both also and you can absolutely and in your case should and mustuse them. I can see if it was just municipal tap water with no softener then you wouldn't need to but anyhow you do so here we go.

Take RO/RODI and add 100-150ppm of cal mag this should be about half the recommended dose.

Then add nutrients at 2.5ml per gal of each. Add half dose of terminator and drop the purpinator you have no need for it or its magical unicorn claims.

Then ph down to 5.8 and feed 1 litre to each plant. You want to get 100-200ml coming out as run off of THAT 1 litre. If you get less feed until you get runoff and increase the frequency of watering.

Right now I would 1-2 times perr day and see from there. It's explained in the thread I linked.

I'm off to bed and may not be on for a while so hopefully someone else can pick up if ya need now that the issue was found.
I have a buddy at a hydro shop studied horticulture and botany, now he works at the hydro shop and all he uses is JR Peters nutrients and his weeds godly! That's what i always used also but i w anted to try some of the new Unicorn stuff lol! So i am using the nectar of the gods did an outdoor run with it great i was able to get a couple lbs of some deadly 27% thc OG Kush/Durban Poison, got 2 oz of pressed hash off the keif from hand trimming also which 20 grams of turned into 7 cartridges of extremly potent oil like 2 hit potent!!! Added a drop of Mickey T MCT oil per gram of oil and 1 drop of limonene per gram i made the oil using the Source Turbo by ExtractCraft well worth the 600.00 for it is outstanding machine has made my life bearable!!
 
Aqua Man

Aqua Man

26,480
638
273... I started using RO water now and it’s at 18. Do I still need to use prime since I have chloramines in Kansas City’s water or does the RO remove them?
Nope no prime needed. If you water with 1 litre and get no run off that means you need to water more often until when you add 1 litre you get the runoff of 100-200ml.

I understand this is a pain in the ass and you may not be able to but the more your diet and let the coco dry between watering the more of an issue it will become
 
Aqua Man

Aqua Man

26,480
638
What PPM is your tap water? If your putting in 2ml of Calmag per feed, then you don't have a Calmag problem.
His tap water goes through a water softener. 273ppm of sodium... personally im 99% positive thats was the reason for all of his previous issues. And we all know coco will exchange K and Ca for sodium so the media coupled with the softener had him doomed from the start.
 
chemistry

chemistry

4,116
263
273ppm is ok water to feed your plants, I feed mine on 265 from my tap, I drop it to PH 6.0 and add nuits all the way up to my plants limits, job done.
 
chemistry

chemistry

4,116
263
His tap water goes through a water softener. 273ppm of sodium... personally im 99% positive thats was the reason for all of his previous issues. And we all know coco will exchange K and Ca for sodium so the media coupled with the softener had him doomed from the start.

Ahhhhhhhhh! What is it before it goes through the water softner?
 
Aqua Man

Aqua Man

26,480
638
Ahhhhhhhhh! What is it before it goes through the water softner?
Not sure i asked if he had access to water before the softener or RO and he had RO so thats what I went with cause I was rushing a bit as had to go.
 
chemistry

chemistry

4,116
263
Not sure i asked if he had access to water before the softener or RO and he had RO so thats what I went with cause I was rushing a bit as had to go.


That's where I would start, before the softner, think it was you that said to dilute the tap water with RO if taps to hard, if its not gone through the softner. At work, so trying to pop in and out as a break from paper work.
 
Aqua Man

Aqua Man

26,480
638
That's where I would start, before the softner, think it was you that said to dilute the tap water with RO if taps to hard, if its not gone through the softner. At work, so trying to pop in and out as a break from paper work.
Yeah absolutely the way to go imo. If he can get it before the softener and mix with RO to reach 100-150ppm starting water its less wasteful and usually provides a good buffer.
 
Wolters_88

Wolters_88

115
28
I’m just using the RO now and it’s at 18 TDS. If I don’t need prime with the RO. I would have been doing this the whole damn time. It’s crazy. They veg amazing then boom.... issues. Same thing all three grows. So doing the one gallon per pot per day is to much? It was coming out at like 20% run off and doing amazing so that’s what I have been doing the whole time.
 
Aqua Man

Aqua Man

26,480
638
I’m just using the RO now and it’s at 18 TDS. If I don’t need prime with the RO. I would have been doing this the whole damn time. It’s crazy. They veg amazing then boom.... issues. Same thing all three grows. So doing the one gallon per pot per day is to much? It was coming out at like 20% run off and doing amazing so that’s what I have been doing the whole time.
No its not to much but its not often enough for ideal fertigation. Better to do 1 litre 4 times a daybif you can.
 
Aqua Man

Aqua Man

26,480
638
But always do it until I get 20% runoff? My nutes with the RO are only like 400 PPM.
You can do it that way if need be... im just giving advice on the ideal method to water coco. By doing it more frequently it will provide a more stable ph, ppm and moisture level. This will reduce any risks of related issues the most. But by no means am I claiming you will have issues if you do it daily... just a higher risk. Now if you were in 1 gal pots doing daily watering start to finish of a grow I could almost promise you would have issues but your not
 
Wolters_88

Wolters_88

115
28
You can do it that way if need be... im just giving advice on the ideal method to water coco. By doing it more frequently it will provide a more stable ph, ppm and moisture level. This will reduce any risks of related issues the most. But by no means am I claiming you will have issues if you do it daily... just a higher risk. Now if you were in 1 gal pots doing daily watering start to finish of a grow I could almost promise you would have issues but your not

How do you guys devote two hours a day to watering? Maybe I should switch to advanced nutrients coco. Take the calcium, ph and time out of it.

Should I be good with the 560 ppm at this stage?

Ok, so it took three liters to get it to runoff at 20%.
 

Latest posts

Top Bottom