Aqua’s Hydro systems meet SPIDERFARMER SE 7000

[Zombierider]

One of the height altering foot wrap holders. Small one for the front door. The other will be a big one for the makeup room. Just needs painted now….

Glad it worked cause I wasn’t sure when i thought it up. Real space saver this way

Wow this thread has really gotten off topic, haha I love it. Nice shoe rack.

 

[Brownthumb]

My wife loves the shoe racks… where do I order… she’ll need several!!! Wish I was kidding

 

[Aqua Man]

My wife loves the shoe racks… where do I order… she’ll need several!!! Wish I was kidding

Made it… not sure if you can buy something similar.

 

[Aqua Man]

Update pics later on. Missing a couple hinges. But pretty much done

 

[GrowHobo]

Update pics later on. Missing a couple hinges. But pretty much done

Smooth. I can hear it now. “Honey remember that shoe rack I was gonna build? It’s done!! I’m also building a new grow room btw”

Watch and learn from the master fellas.

 

[ImpulsiveGrower]

Finally get to see Aqua in action!!

 

[Aqua Man]

Ok pics tomorrow lol… i put all the shit back in the garage before I remembered.

This week will be starting on the system build also. It will be top fed for reasons ill go over during the build

 

[Aqua Man]

Doors up and then flooring and taping. Followed by weather stripping and then equipment install. Be 2 weeks min before i have clones in the system. This week will cover much of the system build.

Once mother clones are in good shape then ill clone and root before putting in.

Prob pics tomorrow or next day. Boring stuff for now but necessary

 

[MercDod]

Looking good. I would like to build something like this in my shed with some T5's I have laying around to start seedlings and veg before moving plants to flower tent.
If the air in your grow room should be replaced every 5 minutes, would it be better to have the AC in the lung room?
Just asking, only a newbie here.

 

[beluga]

Doors up and then flooring and taping. Followed by weather stripping and then equipment install. Be 2 weeks min before i have clones in the system. This week will cover much of the system build.

Once mother clones are in good shape then ill clone and root before putting in.

Prob pics tomorrow or next day. Boring stuff for now but necessary

Boring but Necessary is my favorite subgenre of plant erotica.

 

[Madmax]

Doors up and then flooring and taping. Followed by weather stripping and then equipment install. Be 2 weeks min before i have clones in the system. This week will cover much of the system build.

Once mother clones are in good shape then ill clone and root before putting in.

Prob pics tomorrow or next day. Boring stuff for now but necessary

Sexy ..i took my metal hangers out dad as they take up a little head space and ran 4 hangers to an anchor plate to get a little back .just thought id give you a heads up just incase you grow some aquamonsters in there.but your probably all ready onto it..

 

[Aqua Man]

Looking good. I would like to build something like this in my shed with some T5's I have laying around to start seedlings and veg before moving plants to flower tent.
If the air in your grow room should be replaced every 5 minutes, would it be better to have the AC in the lung room?
Just asking, only a newbie here.

This is a sealed room with co2 injection.

If your running an exhausted room you dont need a lung room per se. The room that the tent or box sits in is the lung room and you cut exhaust and it intake holes as you would a tent.

The bonus to this over a tent in that case is you can make the dimensions you like and that generally means you can go taller or customize it to your exact needs.

The advantage to sealed is you have complete control over co2 and environment when using equipment and controllers. So you just enter the setpoints and they stay where you want no matter whats going on in the room that the grow box is in. Eg the garage in this case can get very hot or cold but it wont influence the conditions inside because its sealed. Also less risk of bugs, causing humidity damage to your property, faster growth rates etc but does cost a bit more to setup

 

[Aqua Man]

Sexy ..i took my metal hangers out dad as they take up a little head space and ran 4 hangers to an anchor plate to get a little back .just thought id give you a heads up just incase you grow some aquamonsters in there.but your probably all ready onto it..View attachment 1265411

Your bang on i will simply use a crimp to shorten the wire cables if i need or remove them

 

[Aqua Man]

Looking good. I would like to build something like this in my shed with some T5's I have laying around to start seedlings and veg before moving plants to flower tent.
If the air in your grow room should be replaced every 5 minutes, would it be better to have the AC in the lung room?
Just asking, only a newbie here.

So in short if you have air exchange then put the AC in the shed wall.

Personally a shed is perfect to just tack up these foam sheet and turn into a grow room very cheap. Either vented or sealed

 

[Aqua Man]

What i use for the foam board to attach to walls wood etc.

 

[Aqua Man]

Clone mothers coming around and will be cutting some clones for this grow on friday. Pic of them right after shipping in crazy heat and transplant and now.

Room is done and just a few days before parts are here to build the system.

Still a bit before we get into full gear but hey patience pays off… usually lol

 

[Zombierider]

Clone mothers coming around and will be cutting some clones for this grow on friday. Pic of them right after shipping in crazy heat and transplant and now.

Room is done and just a few days before parts are here to build the system.

Still a bit before we get into full gear but hey patience pays off… usually lol

Room looks legit, like something good is hiding behind those doors! Amazing that those clones look as well as they do after being shipped in late summer. Its funny to think how fragile I thought cannabis plants were and now I know they can be abused a lot and still turn around and flourish. Amazing fricken plant.

 

[Aqua Man]

World’s smallest clones are cut as of this minute. 7-10 days and we are growing. Final parts come in on tuesday for the system build

 

[Aqua Man]

Starting them in coco for the first time so see how that goes. I like to try new stuff so i get more experience…

Random hint: in this system i will also be using coco/perlite instead of the traditional hydroton.

Why? It creates a better gas barrier than hydroton yet still very porous

 

[Shaded_One]

Starting them in coco for the first time so see how that goes. I like to try new stuff so i get more experience…

Random hint: in this system i will also be using coco/perlite instead of the traditional hydroton.

Why? It creates a better gas barrier than hydroton yet still very porous

Does that impact pH values compared to running straight hydroton? Don't mind me I'm just gonna ask stupid questions cause I don't know anything about hydro