Help with led growtent setup

  • Thread starter trt92
  • Start date
  • Tagged users None
trt92

trt92

391
43
Can i dry my cannabis in my grow tent while i run another grow with light and vent on?
As i will have 2 different strains growing, this wil probably be needed.
 
trt92

trt92

391
43

Found 1 here
Sex:Feminized
%D0%B3%D0%B4%D0%B5%20%D0%BC%D0%BE%D0%B6%D0%BD%D0%BE%20%D0%B2%D1%8B%D1%80%D0%B0%D1%89%D0%B8%D0%B2%D0%B0%D1%82%D1%8C%20(%D0%BD%D0%B0%20%D1%83%D0%BB%D0%B8%D1%86%D0%B5%20%D0%B4%D0%BE%D0%BC%D0%B0%20%D0%B8%D0%BB%D0%B8%20%D0%B2%20%D1%82%D0%B5%D0%BF%D0%BB%D0%B8%D1%86%D0%B5).png
Grows:
Indoor, Outdoor, Greenhouse
%D0%B2%D1%8B%D1%81%D0%BE%D1%82%D0%B0%20%D1%80%D0%B0%D1%81%D1%82%D0%B5%D0%BD%D0%B8%D1%8F.png
Height:
≈ 50 - 100 cm
ves.png
Yield:
≈ 500 - 600 gr m2
%D0%B2%D1%80%D0%B5%D0%BC%D1%8F%20%D1%86%D0%B2%D0%B5%D1%82%D0%B5%D0%BD%D0%B8%D1%8F.png
Flowering time:
8 - 9 weeks
%D0%92%D1%80%D0%B5%D0%BC%D1%8F%20%D0%B4%D0%BE%20%D0%B7%D0%B1%D0%BE%D1%80%D0%B0%20%D1%83%D1%80%D0%BE%D0%B6%D0%B0%D1%8F.png
Complete life cycle:
October
%D0%B3%D0%B5%D0%BD%D0%B5%D1%82%D0%B8%D0%BA%D0%B0.png
Cannabis Genetics
:
G13 x Hawaiian
%D1%82.png
THC:
25%
cc.png
Type:
Sativa 20%, Indica 80%
Go for this 1?

When i search on this strain on google, all places say 80% sativa /20% indica. Is it a misstype on their website?
 
DetroitRuntz

DetroitRuntz

23
13
When i search on this strain on google, all places say 80% sativa /20% indica. Is it a misstype on their website?
80% Indica ~ 20% Sativa is wrong....
80% Sativa ~ 20% Indica is correct...
 
Novaracer69

Novaracer69

522
143
Il prob hang them up dark outside the tent, with some ona to cover som smell from neighbour shed
The drying process is more critical than the grow. Because you can really mess it up if you dry too fast or too hot then you have garbage. Be very careful 60-60 is a good starting point. I know I can't dry my outdoor in my tent 🤣 I use the garage with a humidifier and a fan. They're usually done in 14days unless I have a lot then 18 or so.
 
trt92

trt92

391
43
I could dry outside tent in the shed. But it would stink alot, so might get an extra tent to dry in. Would i need a fan there?
 
trt92

trt92

391
43
The drying process is more critical than the grow. Because you can really mess it up if you dry too fast or too hot then you have garbage. Be very careful 60-60 is a good starting point. I know I can't dry my outdoor in my tent 🤣 I use the garage with a humidifier and a fan. They're usually done in 14days unless I have a lot then 18 or so.
60 fahrenheit and 60 humid?
 
Novaracer69

Novaracer69

522
143
I could dry outside tent in the shed. But it would stink alot, so might get an extra tent to dry in. Would i need a fan there?
If you get another tent to dry in yes you need a extract inline fan.
 
PipeCarver

PipeCarver

Supporter
5,643
313
If you get another tent to dry in yes you need a extract inline fan.
I use a 12 v fan I pulled out of an old Xbox / computer fan. hooked up to a 12 V adapter, I duct tape it in the exhaust port on top of the tent with just passive air intake with a small 6"fan on low moving the air in the tent...not blowing on the hanging buds/ plants.

I'm able to find fans and adapters/ transformers at thrift stores. One in Canada I use Value Village a walmart sized store fill with odds and ends, hundreds of adapters and electrical components, timers & stuff..... all under $5
 
trt92

trt92

391
43
I use a 12 v fan I pulled out of an old Xbox / computer fan. hooked up to a 12 V adapter, I duct tape it in the exhaust port on top of the tent with just passive air intake with a small 6"fan on low moving the air in the tent...not blowing on the hanging buds/ plants.

I'm able to find fans and adapters/ transformers at thrift stores. One in Canada I use Value Village a walmart sized store fill with odds and ends, hundreds of adapters and electrical components, timers & stuff..... all under $5
If i wsnt the tent to eork for growing aswell as drying i might just go with proper fan and filter?

Also my growtent i had to cut the holes myself snd sttatch flanges.. Was ok but abit hazzle.. Anyways fornow i got a 125mm hole for extractor fan with coal filter,, and a small hole for cablle inntake... Is thst enogh passive air? Or shud i cut another 125mm hole at bottom of tent for extra passive air?
 
HerbalEdu

HerbalEdu

1,189
263
If i wsnt the tent to eork for growing aswell as drying i might just go with proper fan and filter?

Also my growtent i had to cut the holes myself snd sttatch flanges.. Was ok but abit hazzle.. Anyways fornow i got a 125mm hole for extractor fan with coal filter,, and a small hole for cablle inntake... Is thst enogh passive air? Or shud i cut another 125mm hole at bottom of tent for extra passive air?
yeah another 125mm hole bottom of the tent as passive intake, with a small grid preferably
 
PipeCarver

PipeCarver

Supporter
5,643
313
If i wsnt the tent to eork for growing aswell as drying i might just go with proper fan and filter?

Also my growtent i had to cut the holes myself snd sttatch flanges.. Was ok but abit hazzle.. Anyways fornow i got a 125mm hole for extractor fan with coal filter,, and a small hole for cablle inntake... Is thst enogh passive air? Or shud i cut another 125mm hole at bottom of tent for extra passive air?
If you are sucking air out at the top you need air in at the bottom. I use passive air in the cold months but I shut them down and use input air from a cooler section of our house when its hot. You need to exchange the air without disturbing your temp and humidity too much. in winter its a slow exchange in the summer fast
 
trt92

trt92

391
43
If you are sucking air out at the top you need air in at the bottom. I use passive air in the cold months but I shut them down and use input air from a cooler section of our house when its hot. You need to exchange the air without disturbing your temp and humidity too much. in winter its a slow exchange in the summer fast
Will i still have no prob getting negative pressure even if i make a 125 mm hole for passive air?
 
PipeCarver

PipeCarver

Supporter
5,643
313
Will i still have no prob getting negative pressure even if i make a 125 mm hole for passive air?
I can't quite image 125mm...my 3x3 has 2 - 5"x15" vents & my 5x5 has 2 5" x18" vents with velcro flaps I can add or remove on both I don't think 125mm is close to that, You may need air coming in on all sides if you use smaller ports.

I've been looking into cutting a water line into my 5x5 by making a flange to use as a port through the tent. The only commercial ones I can find are 6" air duct flanges and that's over kill for me I just need a 2 " hole or Eport.
 

Latest posts

Top Bottom