SMF's land of Larry crosses

  • Thread starter Skunkmasterflex
  • Start date
  • Tagged users None
Skunkmasterflex

Skunkmasterflex

Premium Member
Supporter
3,166
263
Whats up farmers.
So I recently just finished up a large pollination with my Larry og f6 male. Iv worked this line down personally thru each step. I took it to an f6 because until now I haven't found a really killer male Larry iv wanted to use for outcrossing. The f6 stock was real uniform but this particular fella really stank and had a bit more nice structure and not so floppy as most og cuts are. Here's how the line was started...
Step 1: Larry og (cut) x lemon Larry male (Larry Dom)= double Larry f1
Step two: Larry (cut) x double Larry f1 male(Larry Dom)= Larry og bx
...at this point I popped a ton of beans till I found my Larry Dom keeper from the Larry og bx...
Step 3: Larry og (cut) x Larry og bx (Larry Dom male) = f1
...popped a ton of these and found the best male and female....
[(Larry og x Larry bx (Larry Dom female) x (Larry og x Larry bx (Larry fom male)]= f2
....then basically repeated this step down the line till I hit f6 to find my killer stud. I'll post pics of the male later tonight or tomorrow morning. Here is what he put his Mack down on this past run....
91 Chemdog (skunkva) x Larry f6 male
Chemdog #4 x Larry f6 male
Stardawg x Larry f6 male
Triangle kush x Larry f6 male
Goji og x Larry f6 male
East coast sour d x Larry f6 male
Larry og x Larry f6 male
Pre98 bubba x Larry f6 male
Banana spliff x Larry f6 male
....these are all drying\curing. When they are done I'll popped a bunch of each and put up picks in this log.
Hope I find some killer. Wish me luck :) ~Smf~
 
bigcheese510

bigcheese510

4,280
263
Whats up farmers.
So I recently just finished up a large pollination with my Larry og f6 male. Iv worked this line down personally thru each step. I took it to an f6 because until now I haven't found a really killer male Larry iv wanted to use for outcrossing. The f6 stock was real uniform but this particular fella really stank and had a bit more nice structure and not so floppy as most og cuts are. Here's how the line was started...
Step 1: Larry og (cut) x lemon Larry male (Larry Dom)= double Larry f1
Step two: Larry (cut) x double Larry f1 male(Larry Dom)= Larry og bx
...at this point I popped a ton of beans till I found my Larry Dom keeper from the Larry og bx...
Step 3: Larry og (cut) x Larry og bx (Larry Dom male) = f1
...popped a ton of these and found the best male and female....
[(Larry og x Larry bx (Larry Dom female) x (Larry og x Larry bx (Larry fom male)]= f2
....then basically repeated this step down the line till I hit f6 to find my killer stud. I'll post pics of the male later tonight or tomorrow morning. Here is what he put his Mack down on this past run....
91 Chemdog (skunkva) x Larry f6 male
Chemdog #4 x Larry f6 male
Stardawg x Larry f6 male
Triangle kush x Larry f6 male
Goji og x Larry f6 male
East coast sour d x Larry f6 male
Larry og x Larry f6 male
Pre98 bubba x Larry f6 male
Banana spliff x Larry f6 male
....these are all drying\curing. When they are done I'll popped a bunch of each and put up picks in this log.
Hope I find some killer. Wish me luck :) ~Smf~


holy shit SMF.. are you serious right now. youre really just gonna throw that list out there like that in my face.. . i see how you get down haha fucking killing it bro. there isnt a beauty on there that i wouldnt like to have my stable. im still drooling right now i need a fucking bib. get your own help desk already why dont ya! keep it up bro
 
Skunkmasterflex

Skunkmasterflex

Premium Member
Supporter
3,166
263
good luck skunkmasterKICKASS! sitting on a flipping goldmine!
Thanks dwb! Glad u rolled thru. Should get pretty wild down the road and would like to have an experienced guy like you around for pheno selection and what not to work these line more stable
holy shit SMF.. are you serious right now. youre really just gonna throw that list out there like that in my face.. . i see how you get down haha fucking killing it bro. there isnt a beauty on there that i wouldnt like to have my stable. im still drooling right now i need a fucking bib. get your own help desk already why dont ya! keep it up bro
Your to nice cheese :) hope to keep learning the craft some I can make my imprint on the canna world. I really trying to work lines solid so I can say 100% every bean I pop will be nothing but insane dank. It takes some serious time to work things right but the end outcome is epic. Hope to impress ya with even this line in f1....pics soon to come :)
 
bigcheese510

bigcheese510

4,280
263
you call it nice i call it callin it like i see it. youre doing your thang bro, big time respect . it doesnt only take time it takes space, knowledge, dedication and a lot of hard work. the F1 sound like winners to me. even if you get a 60/40 either way should be solid dank! im very impressed!
 
Skunkmasterflex

Skunkmasterflex

Premium Member
Supporter
3,166
263
you call it nice i call it callin it like i see it. youre doing your thang bro, big time respect . it doesnt only take time it takes space, knowledge, dedication and a lot of hard work. the F1 sound like winners to me. even if you get a 60/40 either way should be solid dank! im very impressed!
Thanks bro, I really appreciate that a lot. Mad respect to you as well brotha for all you do around the farm to help out. It def took a decent amount of work to make the male and get it to where it's at now.
 
bigcheese510

bigcheese510

4,280
263
Thanks bro, I really appreciate that a lot. Mad respect to you as well brotha for all you do around the farm to help out. It def took a decent amount of work to make the male and get it to where it's at now.

youre welcome and its my pleasure to help whenever / wherever i can, i love this stuff and i have learned so much from knowledgeable kind people around here it feels good to be able to give back. you spent more time on that cross then a lot of "reputable" breeders do on their signature strain. just the 1 strain you have worked says a lot about you let alone the multiples you have done. its clear why you are the super mod round these parts! keep it up
 
highersolutions

highersolutions

Premium Member
Supporter
765
243
Step 1: Larry og (cut) x lemon Larry male (Larry Dom)= double Larry f1
Step two: Larry (cut) x double Larry f1 male(Larry Dom)= Larry og bx
...at this point I popped a ton of beans till I found my Larry Dom keeper from the Larry og bx...
Step 3: Larry og (cut) x Larry og bx (Larry Dom male) = f1
...popped a ton of these and found the best male and female....
[(Larry og x Larry bx (Larry Dom female) x (Larry og x Larry bx (Larry fom male)]= f2
....then basically repeated this step down the line till I hit f6 to find my killer stud...

I really trying to work lines solid so I can say 100% every bean I pop will be nothing but insane dank. It takes some serious time to work things right but the end outcome is epic. Hope to impress ya with even this line in f1....pics soon to come :)
Much RESPECT bro. It's refreshing seeing breeders actually take their time and work a project out...not a lot do. I would say good luck on your new crosses using that stud but looking at the time you have invested in it, I don't think you will need much luck. Looking forward to the Dank bro! Peace
 
Confuten1

Confuten1

exploitin strengths - perfectin weaknessess
Supporter
1,930
263
Dam skunk, u really put in the wrk and I respect that! When those seeds is ready fir sale, I'll be first in line. Most pollen chuck and call them selves breeders u straight doing it right ! Keep up the hard work, it always pays off!!
Confu...
 
Darth Fader

Darth Fader

1,195
163
Whats up farmers.
So I recently just finished up a large pollination with my Larry og f6 male. Iv worked this line down personally thru each step. I took it to an f6 because until now I haven't found a really killer male Larry iv wanted to use for outcrossing. The f6 stock was real uniform but this particular fella really stank and had a bit more nice structure and not so floppy as most og cuts are. Here's how the line was started...
Step 1: Larry og (cut) x lemon Larry male (Larry Dom)= double Larry f1
Step two: Larry (cut) x double Larry f1 male(Larry Dom)= Larry og bx
...at this point I popped a ton of beans till I found my Larry Dom keeper from the Larry og bx...
Step 3: Larry og (cut) x Larry og bx (Larry Dom male) = f1
...popped a ton of these and found the best male and female....
[(Larry og x Larry bx (Larry Dom female) x (Larry og x Larry bx (Larry fom male)]= f2
....then basically repeated this step down the line till I hit f6 to find my killer stud. I'll post pics of the male later tonight or tomorrow morning. Here is what he put his Mack down on this past run....
91 Chemdog (skunkva) x Larry f6 male
Chemdog #4 x Larry f6 male
Stardawg x Larry f6 male
Triangle kush x Larry f6 male
Goji og x Larry f6 male
East coast sour d x Larry f6 male
Larry og x Larry f6 male
Pre98 bubba x Larry f6 male
Banana spliff x Larry f6 male
....these are all drying\curing. When they are done I'll popped a bunch of each and put up picks in this log.
Hope I find some killer. Wish me luck :) ~Smf~

Jesus! You're not f-ing around! That's a hell of a list. You'll know exactly where that male stands once you test the progeny.
 
JAWS

JAWS

5,803
313
Whats up farmers.
So I recently just finished up a large pollination with my Larry og f6 male. Iv worked this line down personally thru each step. I took it to an f6 because until now I haven't found a really killer male Larry iv wanted to use for outcrossing. The f6 stock was real uniform but this particular fella really stank and had a bit more nice structure and not so floppy as most og cuts are. Here's how the line was started...
Step 1: Larry og (cut) x lemon Larry male (Larry Dom)= double Larry f1
Step two: Larry (cut) x double Larry f1 male(Larry Dom)= Larry og bx
...at this point I popped a ton of beans till I found my Larry Dom keeper from the Larry og bx...
Step 3: Larry og (cut) x Larry og bx (Larry Dom male) = f1
...popped a ton of these and found the best male and female....
[(Larry og x Larry bx (Larry Dom female) x (Larry og x Larry bx (Larry fom male)]= f2
....then basically repeated this step down the line till I hit f6 to find my killer stud. I'll post pics of the male later tonight or tomorrow morning. Here is what he put his Mack down on this past run....
91 Chemdog (skunkva) x Larry f6 male
Chemdog #4 x Larry f6 male
Stardawg x Larry f6 male
Triangle kush x Larry f6 male
Goji og x Larry f6 male
East coast sour d x Larry f6 male
Larry og x Larry f6 male
Pre98 bubba x Larry f6 male
Banana spliff x Larry f6 male
....these are all drying\curing. When they are done I'll popped a bunch of each and put up picks in this log.
Hope I find some killer. Wish me luck :) ~Smf~

those first 5 should be OUTSTANDING my friend!!!
great work:D;):)
 
Skummy

Skummy

44
33
Smf is always doing big thangs.... Haha

Looks like you have put alot of work into this Larry male and when that happends it usually shows in the offspring!
Cant wait to see the VA Cross and the stardawg Cross!

Dro
 
Skunkmasterflex

Skunkmasterflex

Premium Member
Supporter
3,166
263
youre welcome and its my pleasure to help whenever / wherever i can, i love this stuff and i have learned so much from knowledgeable kind people around here it feels good to be able to give back. you spent more time on that cross then a lot of "reputable" breeders do on their signature strain. just the 1 strain you have worked says a lot about you let alone the multiples you have done. its clear why you are the super mod round these parts! keep it up
thanks again for the kind words homie.....who knows maybe one day people will be rocking SMF gear in there gardens lol....

Those sound badass SMF! Great Job Bro!
Thanks GoD....Just trying to make an attempt at keeping up with you fly ass west coast cats :)
keep up all your hard work man.....thanks for rolling thru

The pursuit of the perfect male, you are putting in the work on this one. Should be some amazing little ones coming out of those seeds, good luck. I hope everything else is going amazing for you and yours as well

mal
yesssir, the pursuit for the perfect male....only in the canna world will a straight man be stoked to come across a nice stud lol. def put in some work, hopefully it pays off with some good offspring

Much RESPECT bro. It's refreshing seeing breeders actually take their time and work a project out...not a lot do. I would say good luck on your new crosses using that stud but looking at the time you have invested in it, I don't think you will need much luck. Looking forward to the Dank bro! Peace
thanks man, i appreciate you swinging thru to check out my lil project and showing love. means alot coming from a badass grower such as yourself. hope all has been well with you my friend

Dam skunk, u really put in the wrk and I respect that! When those seeds is ready fir sale, I'll be first in line. Most pollen chuck and call them selves breeders u straight doing it right ! Keep up the hard work, it always pays off!!
Confu...
whats up confu! thank you very much for the kind words brotha! really hope that these all turn out well so i can spread some canna love via seed form :)

Jesus! You're not f-ing around! That's a hell of a list. You'll know exactly where that male stands once you test the progeny.
no games being played here lol. iv been sacrificing lots of room for this project and a few other projects. could have been blowing out all my room with seedless but really wanted to put some real passion into growing so i figure what better way then a few decent breeding projects. thanks for dropping in homie

those first 5 should be OUTSTANDING my friend!!!
great work:D;):)
thanks Jaws.....from one pollen jockey to another, respect :)

Smf is always doing big thangs.... Haha

Looks like you have put alot of work into this Larry male and when that happends it usually shows in the offspring!
Cant wait to see the VA Cross and the stardawg Cross!

Dro
always trying to do big things lol.....yeah the skunkVa cross should be pretty decent. hope to find some nice 50/50 phenos and maybe bring some vigor back to this old 91 cut. its my favorite original Chemdog cut.

Dude cant wait to see pix! There should be some straight flame coming out those crosses! Nice work brother man, you've been busy!
whats up TG! should be some good phenos to be found eh?....been busy with this one so if its a bust ill be pretty pissed hahaha. should be good though. when you start with good genetics it def makes shit a hell of a lot easier ya know
 
Skunkmasterflex

Skunkmasterflex

Premium Member
Supporter
3,166
263
ok, so here is my larry f6 male i used in this project. hes very stinky and iv kept him in a small 16 oz cup to stress test him and i left him un trained to see his true structure. how you see him in these pics is him in raw form and me trying to stress him a bit. hes very stable as far as auto flower or any other problems go. hope he makes some dope babies (literally :) )~SMF~
Rsz dscn2537

Rsz dscn2533
 

Latest posts

Top Bottom